Science Governance and Scientometrics
Published June 30, 2023 | Version v1
Journal article Open

New Aspects of Engineering and Economic Research from the Perspective of Multivariate Scientometric Analysis Using Econlit and Other Sources

Creators

Description

Introduction. Over the past three decades, significant changes have taken place in the world economy, which are reflected in the technical and socio-economic sciences. At the same time, the analysis of publications reflected in EconLit and other authoritative electronic resources, including the journal Scientometrics, showed the absence of review, and especially scientometric works, in which an attempt was made to determine the trends in engineering and economic research based on EconLit, taking into account significant innovative areas (Industry 5.0, etc.). The purpose of the study is to identify new aspects of engineering and economic research using multivariate scientometric analysis based on EconLit materials with the addition of data from other authoritative
sources (Scopus, etc.). Methods. The main method is multivariate scientometric analysis. In cases where paper or electronic media and forms of communication accepted in the scientific community are used to obtain data and communicate to others, scientometrics can be interpreted as bibliometrics, and, accordingly, the phrase 'bibliometric analysis' can be used. The definition 'multidimensional' is used to emphasize the consistent and interconnected application of bibliographic databases, methods for their processing, models and software tools for their analysis, with a focus on the N-dimensional spiral model. Results and Discussion. The main novelty includes the 'points of growth' and the trends in engineering and economic research in 1991—2020. We illustrated the most interesting trends by examples of publications. The analysis of publications in Scopus concerning the concept of Industry 5.0, carried
out using the VOSviewer program, made it possible to identify significant terms and their combinations, calculate publication activity indicators based on the EconLit data, and clarify the 'growth points' of engineering and economic research. Conclusion. Over the past 30 years, there has been a rapid involvement in the engineering economy of new JEL subject microcategories, an increase in the number of intersections between microcategories, and a noticeable enrichment of terminology. This trend poses new challenges for the terminological and lexical types of bibliometric analysis. On the one hand, the use of programs such as VOSviewer helps in this area. On the other hand, this requires a deeper meaningful analysis, highlighting the levels of the real and the virtual and their mutual penetration.

Files

202-247 Бабкин.pdf

Files (1.5 MB)

Name Size Download all
md5:44da0a6b13d9dfe4cc11f7c4cc89bd61
1.5 MB Preview Download

Additional details

References

  • Glänzel W. Bibliometrics as a Research Field. A Course on Theory and Application of Bibliometric Indicators. Course Handouts. 2003. Available at: http://nsdl.niscair.res.in/jspui/bitstream/123456789/968/1/ Bib_Module_KUL.pdf (accessed: 20.05.2023).
  • Pierre-Benoit J, de Looze M-A. Copropriete de Brevets et Cooperation en R&D: Une Analyse Dans Les Biotechnologies. Economie Appliquee. 1999;52(2):183-197.
  • Cerver-Romero E, Ferreira JJ, Fernandes C. A Scientometric Analysis of Knowledge Spillover Research. Journal of Technology Transfer. 2020;45(3):780-805. DOI: http://doi.org/10.1007/s10961-018-9698-9
  • Shen N, et al. Mapping Renewable Energy Subsidy Policy Research Published from 1997 to 2018: A Scientometric Review. Utilities Policy. 2020;18. DOI: https://doi.org/10.1016/j.jup.2020.101055
  • Carvalho V, et al. How Does Packaging Influence Consumer Behavior? A Multidisciplinary Bibliometric Study. International Business Research. 2015;8(5):66-80. DOI: https://doi.org/10.5539/ibr.v8n5p66
  • Modak N, et al. Fifty Years of Transportation Research Journals: A Bibliometric Overview. Transportation Research: Part A: Policy and Practice. 2019;120:188-223. DOI: https://doi.org/10.1016/j.tra.2018.11.015
  • Merediz-Sola I, Bariviera AF. A Bibliometric Analysis of Bitcoin Scientific Production. Research in International Business and Finance. 2019;50:294-305. DOI: https://doi.org/10.1016/j.ribaf.2019.06.008
  • Kuzhabekova A, Kuzma J. Mapping the Emerging Field of Genome Editing. Technology Analysis and Strategic Management. 2014;26(3):321- 352. DOI: https://doi.org/10.1080/09537325.2013.850657
  • Aydogdu A, et al. A Nanotechnology Roadmapping Study for the Turkish Defense Industry. Foresight. 2017;19(4):354-375. DOI: https:// doi.org/10.1108/FS-06-2017-0020
  • Ferrer-Comalat JC, et al. Modelling and Simulation in Management Sciences. Proceedings of the International Conference on Modelling and Simulation in Management Sciences (MS-18). 2020:228.
  • Li X, Pak C, Bi K. Analysis of the Development Trends and Innovation Characteristics of Internet of Things Technology — Based on Patentometrics and Bibliometrics. Technology Analysis and Strategic Management. 2020;32(1):104-118. DOI: https://doi.org/10.1080/095373 25.2019.1636960
  • Al‑Jamimi HA, BinMakhashen GM, Bornmann L. Use of Bibliometrics for Research Evaluation in Emerging Markets Economies: a Review and Discussion of Bibliometric Indicators. Scientometrics. 2022;127(4):5879- 5930. DOI: https://doi.org/10.1007/s11192-022-04490-8
  • Lychagin MV, Lychagin AM, Shevtsov AS. Atlas of Publications in Economics on the EconLit Basis, 1992-2005. Novosibirsk: Siberian Branch of the Russian Academy of Sciences. 2007:400. Available at: https://lib.nsu.ru/xmlui/handle/nsu/2455 (accessed: 20.05.2023).
  • Lychagin MV, et al. Atlas of New Research Based on EconLit (2006—2013). Vol. 17. JEL-category Q. Novosibirsk, Novosibirsk State University Press, 2018:1844. Available at: https://lib.nsu.ru/xmlui/handle/ nsu/15263 (accessed: 20.05.2023). (In Russ.)
  • Babkin AV, Lychagin MV, Lychagin AM. Digital Technologies in Scientific Literature from the Position of Multidimensional Bibliometric Analysis. Strategic Management of Sustainable Economic Development in the New Reality: Monograph / ed. by A. V. Babkin. St. Petersburg: Polytech-Press. 2022:431-485. DOI: https://doi.org/10.18720/IEP/ 2022.2/15 (In Russ.)
  • Relations Tables of 859 JEL Subject Micro Categories Based on EconLit in 1991-2020: Author's Certificate No. 2023620457 Ros. Federation / M. V. Lychagin, A. M. Lychagin, copyright holder: M. V. Lychagin. Application No. 2023620170; date of state registration February 02, 2023. Official. bul. No. 2.
  • Taymaz E. Flexible Automation in the U.S. Engineering Industries. International Journal of Industrial Organization. 1991;9(4):557-572. DOI: https://doi.org/10.1016/0167-7187(91)90065-S
  • Vieweg H-G. The EU Mechanical Engineering — Success in Global Markets Drives Growth. CESifo Forum. 2012;13(1):60-69.
  • Cannas AV, et al. Engineering and Production Decoupling Configurations: An Empirical Study in the Machinery Industry. International Journal of Production Economics. 2019;216:173-178. DOI: https://doi. org/10.1016/j.ijpe.2019.04.025
  • Dutta A, Kumar S, Basu MA Gated Recurrent Unit Approach to Bitcoin Price Prediction. Journal of Risk and Financial Management. 2020;13(2). DOI: https://doi.org/10.3390/jrfm13020023
  • Knights P. Short-Term Supply and Demand of Graduate Mining Engineers in Australia. Mineral Economics. 2020;33(1-2):245-251. DOI: https://doi.org/10.1007/s13563-019-00208-0
  • Pantic-Dragisic S, Soderlund J. Swift Transition and Knowledge Cycling: Key Capabilities for Successful Technical and Engineering Consulting? Research Policy. 2020;49(1). DOI: https://doi.org/10.1016/j.respol. 2019.103880
  • Managing Digital Open Innovation / ed. by P.-J. Barlatier, A.- L. Mention. Singapore: World Scientific. 2020:580. DOI: https://doi. org/10.1142/11794
  • Baumgartner J, et al. Test-Sequence Optimisation by Survival Analysis. Central European Journal of Operations Research. 2019;27(2):357- 375. DOI: https://doi.org/10.1007/s10100-018-0578-z
  • Kamble SS, et al. A Performance Measurement System for Industry 4.0 Enabled Smart Manufacturing System in SMMEs — A Review and Empirical Investigation. International Journal of Production Economics. 2020. DOI: https://doi.org/10.1016/j.ijpe.2020.107853
  • Drennan-Stevenson K. Real-World Implementation of Cyber-Physical Production Systems in Smart Manufacturing: Cognitive Automation, Industrial Processes Assisted by Data Analytics, and Sustainable Value Creation Networks. Journal of Self-Governance and Management Economics. 2019;7(3):14-20. DOI: https://doi.org/10.22381/JSME7320192
  • Weng J, et al. Smart Manufacturing Operating Systems Considering Parts Utilization for Engineer-to-Order Production with Make-to- Stock Parts. International Journal of Production Economics. 2020;220. DOI: http://doi.org/10.1016/j.ijpe.2019.07.032
  • Pasandideh S, Pereira P, Gomes L. Cyber-Physical-Social Systems: Taxonomy, Challenges, and Opportunities. IEEE Access. 2022;10:42404- 42419. DOI: http://doi.org/10.1109/ACCESS.2022.3167441
  • Lazazzara A, et al. Exploring Digital Ecosystems. Organizational and Human Challenges. Switzerland: Springer Nature, 2020:460. DOI: https://doi.org/10.1007/978-3-030-23665-6
  • Kahraman C, et al. Intelligent and Fuzzy Techniques: Smart and Innovative Solutions. Proceedings of the INFUS 2020 Conference. 2020:1705. DOI: https://doi.org/10.1007/978-3-030-51156-2
  • Marques FPG. Internet of Things. Cases and Studies. Switzerland: Springer Nature. 2021:304. DOI: https://doi.org/10.1007/978-3-030- 70478-0
  • Bota-Avram C. Science Mapping of Digital Transformation in Business. A Bibliometric Analysis and Research Outlook. Switzerland: Springer Nature. 2023:78. DOI: https://doi.org/10.1007/978-3-031-26765-9
  • Prokop V, et al. Business Models for the Circular Economy. Sustainability and Innovation. Switzerland: Springer Nature. 2022:269. DOI: https://doi.org/10.1007/978-3-031-08313-6
  • Jahankhani H, et al. Blockchain and Other Emerging Technologies for Digital Business Strategies. Switzerland: Springer Nature. 2022:316. DOI: https://doi.org/10.1007/978-3-030-98225-6