Statistical theory of production systems
Published January 27, 2023 | Version v1
Conference paper Open

Analysis of a Dataset for Modeling a Transport Conveyor

Creators

  • 1. National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine
  • 2. Wroclaw University of Science and Technology, Wrocław, Poland

Description

The analysis of the works, which considered the use of neural networks for modeling a multi-section transport conveyor, was carried out. The prospects for the use of neural networks for the design of highly efficient control systems for the flow parameters of a  multi-section transport conveyor are studied. The problem that limits the use of neural networks for building control systems for the flow parameters of a multi-section transport conveyor is considered. The possibility of constructing generators for generating a data set for the process of training a neural network is being studied. A method for generating a data set based on experimentally 
obtained measurements of the instantaneous values of the input material flow as a result of the operation of industrial transport systems is proposed.  Using dimensionless variables,  a statistical analysis of a stochastic flow of material entering the input of the transport system was performed. An estimate of the correlation time of a stochastic process characterizing the input flow of  material is given.  The recommendations on choosing the type of correlation function for the model of the input material flow were confirmed. It is demonstrated that the input flow of material is a non-stationary stochastic process. Approximations for modeling the input flow of materials of the operating transport system are considered.

Files

Analysis of a Dataset for Modeling a Transport Conveyor.pdf

Files (844.9 kB)

Additional details

Related works

Is published in
Conference paper: https://ceur-ws.org/Vol-3309/ (URL)

References

  • 1. M. Alspaugh, "Latest developments in belt conveyor technology," MINExpo 2004, New York, USA, 2004.
  • 2. M. Alspauch, "The evolution of intermediate driven belt conveyor," Bulk Solids Handling, vol. 23(3), pp. 168–173, 2003. http://www.overlandconveyor.com/pdf/bsh_AlspaughM_3_2003.pdf
  • 3. I. Halepoto, M Shaikh, and B. Chowdhry, "Design and Implementation of Intelligent Energy Efficient Conveyor System Model Based on Variable Speed Drive Control and Physical Modeling, " Journal of Control and Automation, vol. 9(6), pp. 379–388, 2016.
  • 4. O. Pihnastyi, V. Khodusov, "Optimal Control Problem for a Conveyor-Type Production Line," Cybern. Syst. Anal., vol. 54(5), pp. 744–753, 2018. https://doi.org/10.1007/s10559-018-0076-2
  • 5. O. Pihnastyi, V. Khodusov, "The optimal control problem for output material flow on conveyor belt with input accumulating bunker," Bulletin of the South Ural State University. Ser.Mathematical Modelling, Programming & Computer Software, vol. 12(2), pp. 67–81, 2019. http://dx.doi.org/10.14529/mmp190206
  • 6. P. Bardzinski, P. Walker, and W. Kawalec, "Simulation of random tagged ore flow through the bunker in a belt conveying system," International Journal of Simulation Modelling, vol. 4, pp. 597– 608 (2018). https://doi.org/10.2507/IJSIMM17(4)445
  • 7. T. Mathaba, X. Xia, and J. Zhang, "Optimal scheduling of conveyor belt systems under Critical Peak Pricing," 10th International Power & Energy Conference (IPEC), pp. 315–320, 2012. https://doi.org/10.1109/ASSCC.2012.6523285
  • 8. T. Cousins, "Using Time of Use (TOU) Tariffs in Industrial, Commercial and Residential Applications Effectively," TLC Engineering Solutions, pp. 1–15, 2010
  • 9. A. Kirjanow, "The possibility for adopting an artificial neural network model in the diagnostics of conveyor belt splices," Interdisciplinary issues in mining and geology, vol. 6, , pp. 1–11, 2016
  • 10. Xi. Pingyuan, S. Yandong, "Application Research on BP Neural Network PID Control of the Belt Conveyor," JDIM, vol. 9(6), pp. 266–270, 2011
  • 11. I. Shareef, H. Hussein, "Implementation of artificial neural network to achieve speed Control and Power Saving of a Belt Conveyor System," Eastern-European Journal of enterprise technologies, vol. 2(110), pp. 44–53, 2021. https://doi.org/10.15587/1729-4061.2021.224137
  • 12. Y. Yuan, W. Meng, and X. Sun, "Research of fault diagnosis of belt conveyor based on fuzzy neural network," The Open Mechanical Engineering Journal, vol. 8, pp. 916–921, 2014. https://doi.org/10.2174/1874155X01408010916
  • 13. S. Abdollahpor, A. Mahmoudi, and A. Mirzazadeh, "Artificial neural network prediction model for material threshing in combine harvester," Elixir Agriculture, vol. 52, pp. 11621–1162, 2012. https://www.elixirpublishers.com/articles/1353477517_52%20(2012)%2011621-11626.pdf
  • 14. O. Pihnastyi, G. Kozhevnikov, "Control of a Conveyor Based on a Neural Network," International Conference on Problems of Infocommunications. Science and Technology, pp. 295– 300, 2020. https://doi.org/10.1109/PICST51311.2020.9467934
  • 15. M. Koman, Z. Laska, "The constructional solution of conveyor system for reverse and bifurcation of the ore flow, Rudna mine KGHM Polska Miedź SA," CUPRUM, vol. 3(72), pp. 69– 82, 2014
  • 16. M. Bajda, R. Błażej, and L. Jurdziak, "Analysis of changes in the length of belt sections and the number of splices in the belt loops on conveyors in an underground mine," Engineering Failure Analysis, vol. 101, pp. 439–446, 2019. https://doi.org/10.1016/j.engfailanal.2019.04.003
  • 17. R. Król, W. Kawalec, L. Gładysiewicz, "An effective belt conveyor for underground ore transportation systems," Earth and Environmental Science, vol. 95(4), pp. 1–9, 2017. https://doi.org/10.1088%2F1755-1315%2F95%2F4%2F042047
  • 18. V. Prokuda, "Research and assessment of cargo flows on the main conveyor transport "PSP Pavlogradskaya Mine, DTEK Pavlogradugol," Mining electromechanics, vol. 288, pp. 107–111, 2012
  • 19. V. Zaika, Yu. Razumny, V. Prokuda, "Regulated drives influence on coal flow and energy efficiency of mine conveyor transport system," Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 3, pp. 82–88, 2015
  • 20. V. Kondrakhin, N. Stadnik, P. Belitsky, "Statistical Analysis of Mine Belt Conveyor Operating Parameters," Naukovi pratsi DonNTU, vol. 2(26), pp. 140–150, 2013
  • 21. O. Pihnastyi, V. Khodusov, "Model of a composite magistral conveyor line," IEEE International Conference on System analysis & Intelligent computing, Ukraine, pp. 68–72, 2018. https://doi.org/10.1109/saic.2018.8516739
  • 22. O. Pihnastyi, V. Khodusov, "Calculation of the parameters of the composite conveyor line with a constant speed of movement of subjects of labour," Scientific bulletin of National Mining University, vol. 4(166), pp. 138–146, 2018 –https://doi.org/10.29202/nvngu/2018-4/18
  • 23. O. Pihnastyi, G. Kozhevnikov and T. Bondarenko, "An Analytical Method for Generating a Data Set for a Neural Model of a Conveyor Line,"  IEEE 11th International Conference on Dependable Systems, Services and Technologies, Ukraine, pp. 202–206, 2020. https://doi.org/10.1109/DESSERT50317.2020.9125041
  • 24. B. Jeftenić, L. Ristić, M. Bebić, S. Štatkić, D. Jevtić, I. Mihailović, and N. Rašić, "Realization of system of belt conveyors operation with remote control," Structural integrity and life, vol. 10(1), pp. 21–30, 2010. http://divk.inovacionicentar.rs/ivk/ivk10/021-030-IVK1-2010-BJ-LR-MB-SS- DJ-IM-NR.pdf
  • 25. B. Doroszuk, R. Król, and J. Wajs, "Simple design solution for harsh operating conditions: redesign of conveyor transfer station with reverse engineering and DEM simulations," Energies, vol. 14, pp. 1–13, 2021. https://doi.org/10.3390/en14134008
  • 26. F. Zeng, C. Yan, Q. Wu, T. Wang, "Dynamic behaviour of a conveyor belt considering non- uniform bulk material distribution for speed control," Applied sciences, vol. 10, pp. 1–13, 2020. https://doi.org/10.3390/app10134436
  • 27. N. Stadnik, "Frequency-Controlled Electric Drive of Band Conveyors Based on Self- Ventilating Engines," Scientific Bulletin of the Donetsk National Technical University, vol. 2, pp. 226–232, 2012
  • 28. A. Semenchenko, M. Stadnik, P. Belitsky, D. Semenchenko, and O. Stepanenko, "The impact of an uneven loading of a belt conveyor on the loading of drive motors and energy consumption in transportation," Eastern-European Journal of Enterprise Technologies, vol. 82, pp. 42–51, 2016. https://doi.org/10.15587/17294061.2016.75936
  • 29. W. Kawalec, R. Król, "Generating of Electric Energy by a Declined Overburden Conveyor in a Continuous Surface Mine," Energies, vol. 14, pp. 1–13, 2021. https://doi.org/10.3390/en14134030
  • 30. V. Kondrakhin, N. Stadnik, P. Belitsky, "Traffic measurement on the belt conveyor through removable tensor device with belt tension accounting," DonNTU scientific works, vol. 1, pp. 79– 87, 2013
  • 31. L. Gladysiewicz, W. Kawalec, "Optimised Selection Of A Belt Conveyor Loaded By A BWE," 8th InternationalSymposium of Continuous Surface Mining ISCSM, Aachen, Germany, pp. 24–27, September 2006
  • 32. A. Tynynyka, "Application of the entropic coefficient for interval number optimization during interval assessment," Technology and design in electronic equipment, vol. 3, pp. 49–54, 2017. https://www.readcube.com/articles/10.15222%2Ftkea2017.3.49
  • 33. I. Heinhold, K. Gaede, Ingeniur statistic.Springler Verlag, 1964.Wang, Xin, Tapani Ahonen, and Jari Nurmi. "Applying CDMA technique to network-on-chip." IEEE transactions on very large scale integration (VLSI) systems 15.10 (2007): 1091-1100

This site uses cookies. Find out more on how we use cookies