Published July 8, 2022 | Version v1
Journal article Open

Simulation of electromagnetic processes in the grounding system with a short circuit in the operating high-voltage substation

Creators

  • 1. National Technical University «Kharkiv Polytechnic Institute», Ukraine
  • 2. TMC Group, Lebanon

Description

The aim of the work is a test of the developed mathematical model of electromagnetic processes of short circuit and approbation of the created software complex «LiGro» on its basis for the existing grounding system located in three-layer soil. Methodology. To improve the accuracy of calculating the normalized parameters of operating power stations and substations, the authors developed the «LiGro» software package based on the expressions obtained in for calculating the potential of the electric field of a non-equipotential grounding system (GS). To monitor the state and assess the efficiency of the GS of operating power facilities, the electromagnetic diagnostics is used. The topology of the GS was determined with the induction method by complex KNTR-1, the geoelectric structure of the soil was determined by the method of vertical electrical sounding using the Wenner installation, the interpretation of the sounding results was made by the «VEZ-4A» program. The calculation results show that for the selected substation, the model developed in the «LiGro» complex has a deviation δ2 from the experimental values Ut by an average of 8,2 %, and the model implemented in Grounding 1.0 (IEEE model) δ1 is 17,2 %. Originality. The results of the study confirm the adequacy of the developed GS model in the «LiGro» complex based on a three-layer soil model, with the experimental values of the touch voltage obtained by simulating a single-phase ground fault on a real GS in operation. The first time was made approbation of the «LiGro» software package when performing the EMD of the GS of an operating substation with a voltage class of 150 kV. Practical significance. The program software can be used by special measuring’s laboratory to determining electrical safety parameters: touch voltage, GS voltage, and GS resistance. 

Files

Simulation of electromagnetic processes in the grounding system with a short circuit in the operating high-voltage substation.pdf

Files (1.4 MB)

Additional details

References

  • Natsional'nyy standart Ukrayiny. SOU 31.2-21677681-19:2009. Viprobuvannya ta kontrol' prystroyiv zazemlennya elektroustanovok. Tipova іnstruktsіya [National Standard of Ukraine SOU 31.2-21677681-19:2009. Test and control devices, electrical grounding. Standard instruction]. Kyiv, Mіnenergovugіllya Ukrayiny Publ., 2010. 54 p. (Ukr).
  • Koliushko D.G., Rudenko S.S., Plichko A.V., Shcherbinin V.I. Modernization of the complex type IK-1U for measuring the impedance of the grounding device of a lightning arrester and supports of transmission lines. Electrical Engineering & Electromechanics, 2019, no. 3, pp. 55-58. doi: https://doi.org/10.20998/2074-272X.2019.3.09.
  • Koliushko D.G., Rudenko S.S. Experimental substantiation of the calculation procedure of normalized parameters of grounding device based on the three-layer soil model. Electrical Engineering & Electromechanics, 2018, no. 1, pp. 66-70. doi: https://doi.org/10.20998/2074-272X.2018.1.11.
  • O. Rezinkin, M. Rezinkina, A. Danyluk, R. Tomashevskyi, Formation of high-voltage pulses with nanosecond fronts in low-impedance loads. IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON), 2019, pp. 464-467. doi: https://doi.org/10.1109/UKRCON.2019.8880015.
  • Rezinkina M., Rezinkin O., D'Alessandro F., Danyliuk A., Lisachuk G., Sosina E., Svetlichnaya E. Influence of corona on strike probability of grounded electrodes by high voltage discharges. Journal of Electrostatics, 2016, vol. 83, pp. 42-51. doi: https://doi.org/10.1016/j.elstat.2016.07.005.
  • Koliushko D.G., Rudenko S.S. Determination the electrical potential of a created grounding device in a three-layer ground. Technical Electrodynamics, 2018, no. 4, pp. 19-24. doi: https://doi.org/10.15407/techned2018.04.019.
  • Koliushko D.G. Sovershenstvovanie diagnostiki zazemliaiushchikh ustroistv elektroenergoob'ektov. Diss. cand. techn. nauk [Improving the diagnosis of grounding devices for electric power objects. Cand. tech. sci. diss.]. Kharkiv, 2003. 172 p. (Rus).
  • Turri R., Andolfato R., Cuccarollo D. A numerical simulation tool for cathodic protection and electromagnetic interference analysis. NACE Milano Italia Section – Conference & Expo 2016 «A European event for the Corrosion Prevention of Oil&Gas industry». 17 p. Available at: https://www.researchgate.net/publication/303685228_A_NUME (accessed 10 April 2022).
  • Hossain M.S., Ahmed R., Hossain S. Design and Optimization of Substation Grounding Grid for Ensuring the Safety of Personnel and Equipment. Journal of Electrical Power & Energy Systems, 2021, vol. 5, no. 1, pp. 71-80. doi: https://doi.org/10.26855/jepes.2021.08.001.
  • Tabatabaei N.M., Mortezaeei S.R. Design of grounding systems in substations by ETAP intelligent software. International Journal on «Technical and Physical Problems of Engineering» (IJTPE), 2010, iss. 2, vol. 2, no. 1, pp. 45-49. Available at: http://www.iotpe.com/IJTPE/IJTPE-2010/IJTPE-Issue2-Vol2-No1-Mar2010/9-IJTPE-Issue2-Vol2-No1-Mar2010-pp45-49.pdf (accessed 05 April 2022).
  • Cardoso C., Rocha L., Leiria A., Teixeira P. Validation of an integrated methodology for design of grounding systems through field measurements. CIRED - Open Access Proceedings Journal, 2017, vol. 2017, no. 1, pp. 897-901. doi: https://doi.org/10.1049/oap-cired.2017.0452.
  • Uma U., Uzoechi L., Robert B. Optimization design of ground grid mesh of 132/33 kV substation using Etap. Nigerian Journal of Technology, 2016, vol. 35, no. 4, pp. 926-934. doi: https://doi.org/10.4314/njt.v35i4.30.
  • IEEE Std 80-2013. Guide for Safety in AC Substation Grounding. New York, IEEE, 2013. 206 p. doi: https://doi.org/10.1109/IEEESTD.2015.7109078.
  • IEEE Std 81-2012. Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System. New York, IEEE, 2012. 86 p. doi: https://doi.org/10.1109/IEEESTD.2012.6392181.
  • Koliushko D.G., Rudenko S.S., Koliushko G.M., Plichko A.V. Testers for Measuring the Electrical Characteristics of Grounding Systems by IEEE Standards. 2020 IEEE KhPI Week on Advanced Technology (KhPIWeek), 2020, pp. 216-220. doi: https://doi.org/10.1109/KhPIWeek51551.2020.9250116.
  • Koliushko D.G., Rudenko S.S., Saliba A.N. Method of integro-differential equations for interpreting the results of vertical electrical sounding of the soil. Electrical Engineering & Electromechanics, 2021, no. 5, pp. 67-70. doi: https://doi.org/10.20998/2074-272X.2021.5.09.
  • Electrical installation regulations. Kharkiv, Fort Publ., 2017. 760 p. (Ukr).