Dryad
Published December 15, 2022 | Version v1
Dataset Open

Enhancing understanding of the hydrological cycle via pairing of process‐oriented and isotope ratio tracers

Authors/Creators

  • 1. University of Utah
  • 2. Oregon State University
  • 3. National Center for Atmospheric Research
  • 4. University of Auckland

Description

This dataset contains monthly average output files from the iCAM6 simulations used in the manuscript "Enhancing understanding of the hydrological cycle via pairing of process-oriented and isotope ratio tracers," in review at the Journal of Advances in Modeling Earth Systems. A file corresponding to each of the tagged and isotopic variables used in this manuscript is included. Files are at 0.9° latitude x 1.25° longitude, and are in NetCDF format. Data from two simulations are included: 1) a simulation where the atmospheric model was "nudged" to ERA5 wind and surface pressure fields, by adding an additional tendency (see section 3.1 of associated manuscript), and 2) a simulation where the atmospheric state was allowed to freely evolve, using only boundary conditions imposed at the surface and top of atmosphere.

Specific information about each of the variables provided is located in the "usage notes" section below.

Associated article abstract:

The hydrologic cycle couples the Earth's energy and carbon budgets through evaporation, moisture transport, and precipitation. Despite a wealth of observations and models, fundamental limitations remain in our capacity to deduce even the most basic properties of the hydrological cycle, including the spatial pattern of the residence time (RT) of water in the atmosphere and the mean distance traveled from evaporation sources to precipitation sinks. Meanwhile, geochemical tracers such as stable water isotope ratios provide a tool to probe hydrological processes, yet their interpretation remains equivocal despite several decades of use. As a result, there is a need for new mechanistic tools that link variations in water isotope ratios to underlying hydrological processes. Here we present a new suite of "process-oriented tags," which we use to explicitly trace hydrological processes within the isotopically enabled Community Atmosphere Model, version 6 (iCAM6). Using these tags, we test the hypotheses that precipitation isotope ratios respond to parcel rainout, variations in atmospheric RT, and preserve information regarding meteorological conditions during evaporation. We present results for a historical simulation from 1980 to 2004, forced with winds from the ERA5 reanalysis. We find strong evidence that precipitation isotope ratios record information about atmospheric rainout and meteorological conditions during evaporation, but little evidence that precipitation isotope ratios vary with water vapor RT. These new tracer methods will enable more robust linkages between observations of isotope ratios in the modern hydrologic cycle or proxies of past terrestrial environments and the environmental processes underlying these observations.
 

Notes

Metadata are provided about each of the files below; moreover, since the attached files are NetCDF data - this information is also provided with the data files. NetCDF metadata can be accessed using standard tools (e.g., ncdump).

Each file has 4 variables: the tagged quantity, and the associated coordinate variables (time, latitude, longitude). The latter three are identical across all files, only the tagged quantity changes.

Twelve files are provided for the nudged simulation, and an additional three are provided for the free simulations:

  1. Nudged simulation files
    1. iCAM6_nudged_1980-2004_mon_RHevap: Mass-weighted mean evaporation source property: RH (%) with respect to surface temperature.
    2. iCAM6_nudged_1980-2004_mon_Tevap: Mass-weighted mean evaporation source property: surface temperature in Kelvin
    3. iCAM6_nudged_1980-2004_mon_Tcond: Mass-weighted mean condensation property: temperature (K)
    4. iCAM6_nudged_1980-2004_mon_columnQ: Total (vertically integrated) precipitable water (kg/m2).  Not a tagged quantity, but necessary to calculate depletion times in section 4.3 (e.g., Fig. 11 and 12).
    5. iCAM6_nudged_1980-2004_mon_d18O: Precipitation d18O (‰ VSMOW)
    6. iCAM6_nudged_1980-2004_mon_d18Oevap_0: Mass-weighted mean evaporation source property - d18O of the evaporative flux (e.g., the 'initial' isotope ratio prior to condensation), (‰ VSMOW)
    7. iCAM6_nudged_1980-2004_mon_dxs: Precipitation deuterium excess (‰ VSMOW) - note that precipitation d2H can be calculated from this file and the precipitation d18O as d2H = d-excess - 8*d18O.
    8. iCAM6_nudged_1980-2004_mon_dexevap_0: Mass-weighted mean evaporation source property - deuterium excess of the evaporative flux
    9. iCAM6_nudged_1980-2004_mon_lnf: Integrated property - ln(f) calculated from the constant-fractionation d18O tracer (see section 3.2).
    10. iCAM6_nudged_1980-2004_mon_precip: Total precipitation rate in m/s. Note there is an error in the metadata in this file - it is total precipitation, not just convective precipitation.
    11. iCAM6_nudged_1980-2004_mon_residencetime: Mean atmospheric water residence time (in days).
    12. iCAM6_nudged_1980-2004_mon_transportdistance: Mean atmospheric water transport distance (in km).
    13. iCAM6_nudged_1980-2004_mon_precc.nc: Local mean convective precipitation rate (m/s).
    14. iCAM6_nudged_1980-2004_mon_precl.nc: Local mean large-scale (e.g., stratiform) precipitation rate (m/s).
    15. iCAM6_nudged_1980-2004_mon_t2m.nc: Local 2-m air temperature (K).
    16. iCAM6_nudged_1980-2004_mon_Tsrf.nc: Local surface temperature (K).
  2. Free simulation files
    1. iCAM6_free_1980-2004_mon_d18O: Precipitation d18O (‰ VSMOW)
    2. iCAM6_free_1980-2004_mon_dxs: Precipitation deuterium excess (‰ VSMOW) - note that precipitation d2H can be calculated from this file and the precipitation d18O as d2H = d-excess - 8*d18O.
    3. iCAM6_free_1980-2004_mon_precip: Total precipitation rate in m/s. Note there is an error in the metadata in this file - it is total precipitation, not just convective precipitation.

Funding provided by: National Science Foundation
Crossref Funder Registry ID: http://dx.doi.org/10.13039/100000001
Award Number: 1954660

Funding provided by: National Science Foundation
Crossref Funder Registry ID: http://dx.doi.org/10.13039/100000001
Award Number: 1954663

Files

README.md

Files (1.4 GB)

Name Size Download all
md5:820315931b18647440d0b152aa049d74
66.4 MB Download
md5:409d8b7b254566c87f3f74b5df27a837
66.4 MB Download
md5:5eba6c9fc1f3695f224f57b05b708c3d
66.4 MB Download
md5:2d127dd858ceb2692849cd0a115fc965
66.4 MB Download
md5:299adf074ddd6100ff2e22f4c47e30da
66.4 MB Download
md5:72c7df42907edab506e18f4d3ecaddb1
66.4 MB Download
md5:8a745b43a0a5485ef8c7c92617c63d05
66.4 MB Download
md5:261974e191d062b9176e2df7c9dafd51
66.4 MB Download
md5:ff61c0a278f0902910b4efed56da6663
132.8 MB Download
md5:447aa54197384382c0fb15b320627a32
66.4 MB Download
md5:26e113ca458cc57b95322620d09198b1
66.4 MB Download
md5:997ac75459ce9290beda831d0d3de24a
66.4 MB Download
md5:d4b267a7a18622b409b3cf014c00ea47
66.4 MB Download
md5:b53ec4321ba53f4974bc5f94ac4ea8ae
66.4 MB Download
md5:96e5b178c02de7b721244c4e6a08026b
66.4 MB Download
md5:3bf8a593e1f3fde789b4c26f7a51977e
66.4 MB Download
md5:f9bf49f4086ad2162c6277eaf62f0df4
66.4 MB Download
md5:95583713550aa811a25f82c709f455fa
132.8 MB Download
md5:bff082c6fb7e535c16191c046938cefe
66.4 MB Download
md5:651f944169e61311d7f403f54a7126c2
7.4 kB Preview Download

Additional details

Related works

Is cited by
10.1029/2021ms002648 (DOI)