Published May 30, 2025 | Version CC-BY-NC-ND 4.0
Journal article Open

A Review of Decorticators for Various Industrial Crops: Design, Working Principle, and Parameters Affecting the Efficiency

Creators

  • 1. Department of Food Process Engineering, National Institute of Technology, Rourkela (Odisha), India.

Contributors

Contact person:

  • 1. Department of Food Process Engineering, National Institute of Technology, Rourkela (Odisha), India.
  • 2. Assistant Professor, Department of Food Science, Amity University, Mohali (Punjab), India.
  • 3. Department of Food Process Engineering, ICAR-Central Citrus Research Institute, Nagpur (Maharashtra), India.
  • 4. Associate Professor, Department of Food Process Engineering, National Institute of Technology, Rourkela (Odisha), India.
  • 5. Professor, Department of Food Process Engineering, National Institute of Technology, Rourkela (Odisha), India.

Description

Abstract: Traditional knowledge in India is plenty, but its reporting for knowledge sharing is needed. A decorticator is a machine traditionally used to augment local farmers' needs. Decortication is the phenomenon of discarding the seed pods or casing and separating the seed pod or enclosure from the seed or kernel. Many developments in the decorticators have happened in the last one or two decades. They are either manually operated or power-driven. Few of the developed technologies are available in the Indian market. One of the drawbacks of these machines is their adaptability to different seeds or fruits. Efforts are made to increase the efficiency of the decorticators by reducing the drudgery and hazards. The economic aspect of the design and developments have also been looked into. Decorticator machines are available for groundnut, jatropha, nutmeg, sal, apricot, hemp, tamarind, mango stone, mahua, tung, chironji, castor, sunflower, etc. The principle of operation of all the developed decorticators is different, like the type of forces used for the removal of the seed coat. The working principle of each developed machine is highlighted in this review. The efficiency of the decorticator is dependent on many factors such as crop maturity stage, shape and size of seeds, moisture content, etc. Also, various machine parameters like feed rate, operating speed, clearance, operator’s experience, and skill will affect the efficiency of decorticators. A critical review is made to understand all the mentioned factors and their influence on decorticator efficiency. Agricultural scientists will highly benefit from this compiled review work and it will be helpful in the design and development of decorticators for any specific seeds.

Files

A152905010525.pdf

Files (524.8 kB)

Name Size Download all
md5:eabf31f59dc1e222213013adf5b3c266
524.8 kB Preview Download

Additional details

Identifiers

DOI
10.54105/ijae.A1529.05010525
EISSN
2582-9319

Dates

Accepted
2025-05-15
Manuscript received on 10 March 2025 | First Revised Manuscript received on 22 March 2025 | Second Revised Manuscript received on 17 April 2025 | Manuscript Accepted on 15 May 2025 | Manuscript published on 30 May 2025.

References

  • Kabir, A.A. & Fedele, O.K. (2018). A Review of Shelling, Threshing, De-Hulling and Decorticating Machines. In Open Access Journal of Agricultural Research (OAJAR) (Volume 3, Issue-1, pp. 000148). DOI: https://doi.org/10.23880/oajar-16000148
  • Sharma, V., Pradhan, R.C., Naik, S.N., et al (2013). Evaluation of a centrifugal impaction-type decorticator for shelling tung fruits. In Industrial Crops Products (ICP) (Volume 43, Issue- pp.126–131). DOI: https://doi.org/10.1016/j.indcrop.2012.06.046
  • Pradhan, R.C., Naik, S.N., Bhatnagar, N., & Vijay, V.K. (2010). Design, development and testing of hand-operated decorticator for Jatropha fruit. In Applied Energy (AE) (Volume 87, Issue-3, pp. 762–768). DOI: https://doi.org/10.1016/j.apenergy.2009.09.019
  • Oluwole, F.A., Aviara, N.A., & Haque, M.A. (2004). Development and performance tests of a sheanut cracker. In Journal of Food Engineering (JFE) (Volume 65, Issue-1, pp. 117–123). DOI: https://doi.org/10.1016/j.jfoodeng.2004.01.004
  • Ogunsina, B.S., & Bamgboye, A.I. (2012). Effect of Moisture Content, Nut Size and Hot-Oil Roasting Time on the Whole Kernel "Out-Turn" of Cashew Nuts (Anacardium occidentale) During Shelling. In Nigerian Food Journal (NFJ) (Volume 30, Issue-2 pp. 57–65). DOI: https://doi.org/10.1016/s0189-7241(15)30036-9
  • Said, P.P., Ramakumar, M.V., & Ranganna, B. (2011). Development and performance evaluation of a nutmeg decorticator. In The Mysore Journal of Agricultural Sciences (MJAS) (Volume 45, Issue-4, pp. 764– 768). https://www.academia.edu/26221213
  • Shashi Kumar, C., Pradhan, R.C., & Mishra, S. (2017). Fabrication, performance evaluation and optimization of Sal (Shorea robusta) seed decorticator. In Journal of Food Process Engineering (JFPE) (Volume 40, Issue-3, pp. e12468). DOI: https://doi.org/10.1111/jfpe.12468
  • Karthickumar, P., Pandian, N.K.S., Rajkumar, P., et al. (2015). Development and Evaluation of a Continuous type Tamarind Deseeder. In Agricultural Engineering (AE) (Volume 2, Issue- pp. 49 – 59). https://www.researchgate.net/publication/313164648
  • Solanki, R.C. (2011). Development of Depulper and Decorticator for Processing of neem fruits and seeds. In Ph.D thesis, Indian Institute of Technology Delhi, India. https://libcat.iitd.ac.in/bib/165282
  • Ahmad, T., Mahmood, H.S., Ali, Z., et al (2017) Design and Development of a Portable Sisal Decorticator. In Pakistan Journal of Agricultural Research (PJAR) (Volume 30, Issue-3, pp. 209-309). DOI: https://doi.org/10.17582/journal.pjar/2017.30.3.209.217
  • Ranjeet, S., & Sukhdev, M. (2013). Development and Evaluation of Centrifugal Sheller for Muskmelon Seed. In International Research Journal of Biological Sciences (IRJBS) (Volume 2, Issue-3, pp. 7–10). https://isca.me/IJBS/Archive/v2/i3/2.ISCA-IRJBS-2012-182.pdf
  • Gupta, R.K., & Das, S.K. (1999). Performance of centrifugal dehulling system for sunflower seeds. In Journal of Food Engineering (JFE) (Volume 42, Issue 4, pp. 191–198). DOI: https://doi.org/10.1016/S0260- 8774(99)00119-3
  • Chithra, G. (2007). Development of a Powered Decorticator for Producing White Pepper from Balck Pepper. M.Tech Thesis, 1-174. DOI: http://14.139.181.140:8080//jspui/handle/123456789/317
  • Romuli, S., Karaj, S., & Müller, J. (2017). Discrete element method simulation of the hulling process of Jatropha curcas L. fruits. In Biosystems Engineering (BE) (Volume 155, Issue- p
  • Kate, A.E., Lohani, U.C., Shahi, N.C. (2018). Development and testing of apricot (Prunus armeniaca. L) pit decorticator. In Journal of Food Process Engineering (JFPE) (Volume 41, Issue-5 pp. e12690). DOI: https://doi.org/10.1111/jfpe.12690
  • Agberegha, L.O., Emagbetere, E., Onoroh, F., et al (2021). Design and Fabrication of a Melon (Egusi) Decorticating Machine. In Saudi Journal of Engineering and Technology (SJET) (Volume 6, Issue-11, pp.432– 444). https://saudijournals.com/media/articles/SJEAT_611_432- 444c.pdf
  • Tenerife, P.M., De La Cruz, A.R., Arce, A.C.M., et al (2019). Design and development of banana fiber decorticator with wringer. In International Journal of Recent Technologies and Engineering (IJRTE) (Volume 8, Issue-1S4, pp.82–84). https://www.ijrte.org/portfolioitem/a10160681s419/
  • Thilakarathna, R.C.N., Madhusankha, G.D.M.P., Thilakarathna, R.M., & Navaratne, S.B. (2018). Design And Fabrication Of A Prototype Decorticator To Remove Seed Coat Of Black Cumin (Nigella Sativa). In American Journal of Engineering Research (AJER) (Volume 7, Issue7, pp. 172–180). https://www.ajer.org/papers/Vol-7-issue7/S0707172180.pdf
  • Idowu, D.O., Owolarafe, O.K. (2021). Development of a Snake Gourd Seed Decorticating Machine. In Journal of Engineering Research Reports (JERR) (Volume 20, Issue-12, pp.177–192). DOI: https://doi.org/10.9734/jerr/2021/v20i1217432
  • Odigboh, E.U. (1979). Impact egusi shelling machine. In Transactions of the American Society of Agricultural Engineers (TASAE) (Volume 22, Issue-6, pp. 1264-1269). DOI: http://doi.org/10.13031/2013.35196
  • Sudajan, S., Salokhe, V.M., & Triratanasirichai, K. (2002). Effect of type of drum, drum speed and feed rate on sunflower threshing. In Biosystems Engineering (BE) (Volume 83, Issue-4, pp. 413–421). DOI: https://doi.org/10.1006/bioe.2002.0133
  • Makanjuola, G.A. (1975). An evaluation of some centrifugal impaction devices for shelling melon seeds. In Journal of Agricultural Engineering Research (JAER) (Volume 20, Issue-1, pp. 71–77). DOI: https://doi.org/10.1016/0021-8634(75)90097-9
  • Nayak, P., Rayaguru, K., Pal, U.S., & Dash, S.K. (2022). Development and performance evaluation of hand-operated mango seed decorticator. In Journal of Food Science and Technology (JFST) (Volume 59, Issue- , pp. 2402–2409). DOI: https://doi.org/10.1007/s13197-021-05256-5
  • Jambh, H.K., & Kumar, K. (2019). Design and development of mango stone decorticator. In International Journal of Chemical Studies (IJCS) (Volume 7, Issue-6, pp. 2660-2666). http://www.chemijournal.com/archives/2019/vol7issue6/PartAR/7-6- 320-619.pdf
  • Sahu, A. R., & Gulhane, U. D. (2005). Design and fabrication of tamarind cover and seed separation machine. Department of Mechanical and Production Engineering, BD College of Engineering, Sewagarm, Wardha, 391-395. https://nacomm2005.ammindia.org/
  • N. Gitau, A., Mboya, P., K. Njoroge, B.N., & Mburu, M., (2013). Optimizing the Performance of a Manually Operated Groundnut (Arachis hypogaea) Decorticator. In Open Journal of Optimization (OJO) (Volume 2, Issue-1, pp. 26–32). DOI: https://doi.org/10.4236/ojop.2013.21004
  • Singh, G., & Chand, K., 2020. Development and performance evaluation of pedal-operated dehuller for black soybean. In International Journal of Agricultural Engineering (IJAE) (Volume 13, Issue-, pp. 245–251). DOI: https://doi.org/10.15740/has/ijae/13.2/245-251
  • Yadav, R., Singh P., & Tiwari, G. (1996). Studies on centrifugal decortication of sunflower seed. In Agricultural mechanization in Asia, Africa and Latin America (AMAALA) (Volume 27, Issue-3, pp. 62-64). https://www.researchgate.net/publication/263521948
  • Dange, M.M., P.S. Champawat, P.H. Bakane, S.D. Deshmukh, S.K. Jain and Borkar, P.A. (2019). Process Parameters for Chironji Nut (Buchanania lanzan.) Decortication. In International Journal of .Current Microbiology and Applied Sciences (IJCMAS) (Volume 8, Issue-1, pp. 1848-1862). DOI: https://doi.org/10.20546/ijcmas.2019.801.195
  • Manjunath, B.A., Ahmed, K.S., & Sreepathi, L.K. (2016). Design and Fabrication of Pongamia Pinnata Decorticator. In Journal of Mechanical Engineering and Automation (JMEA) (Volume 6, Issue-5A, pp. 1–7). http://article.sapub.org/10.5923.c.jmea.201601.01.html
  • Sahu, F.M., Suthar, S.H., Sharma, V.K., & Hegde, H.T. (2023). Development and performance of Mahua (Madhuca longifolia) seed decorticator. In Indian Journal of Ecology (IJE) (Volume 50, Issue-4, pp. 984-988). DOI: https://doi.org/10.55362/IJE/2023/4000.
  • Adedeji, M.A., & Danladi, W.Y., (2016). Modification and construction of motorized Bambaranut decorticating machine. In Global Advanced Research Journal of Engineering Technology and Innovation (GARJETI) (Volume 5, Issue-1, pp. 1-6). https://www.researchgate.net/publication/297386805
  • Iyanda, M.O., Alhassan, E.A., Osueke, C.O., Okonkwo, C.E., (2020). Development of a moringa oleifera seed shelling machine. In International Journal of Engineering Research in Africa (IJERA) (Volume 46, Issue- pp. 53–62). DOI: https://doi.org/10.4028/www.scientific.net/JERA.46.53
  • Mohammed, G. I., Musa, B. A., Agidi, G., & Alhaji, S. A. (2021). The Effects of Some Mechanical Parameters of a Developed Millet Thresher on Millet Threshing and Cleaning Efficiencies. In Indian Journal of Design Engineering (Vol. 1, Issue 2, pp. 6–12). DOI: https://doi.org/10.54105/ijde.b8015.081221
  • Zerusha, S. S. L., & Prasad, Dr. B. D. (2024). Fabrication of a Portable Groundnut Decorticating Machine for Domestic Purpose. In International Journal of Engineering and Advanced Technology (Vol. 14, Issue 1, pp. 10–16). DOI: https://doi.org/10.35940/ijeat.a4535.14011024