ImSwitch - OS

This is a compiled image for the Raspberry Pi 5 to deploy ImSwitch in Docker. 

It is based on the following repository that builds the image file based on Raspberry Pi OS lite using Github actions:

https://github.com/beniroquai/imswitch-os/tree/main

and 

https://github.com/openUC2/pallet

It is based on the following build: 

https://github.com/beniroquai/imswitch-os/actions/runs/13718023729

Steps to use it (see also: https://openuc2.github.io/docs/ImSwitch/ImSwitchOnRaspi#option-2-using-the-pre-built-forklift-image) 

1. Download *`zip` and unzip it to get the `.img` file
2. Use the Raspberry Pi Imager to flash the file onto an SD card 
3. insert the SD card into the raspi and boot it
4. Wait until you see the SSID `openUC2-unkown`
5. Connect to that and go to http://192.168.4.1:9090 - this should indicate the cockpit 
6. Connect to ImSwitch by going to https://192.168.4.1:8001/imswitch/index.html => accept the https error (it's self-signed for now) 
7. The configuration is in Demo mode - for your hardware-specific configuration have a look [here](https://openuc2.github.io/docs/ImSwitch/ImSwitchOnRaspi#modifying-imswitch-configuration) how to set it up: