Published February 28, 2025 | Version CC-BY-NC-ND 4.0
Journal article Open

Phase Composition and Parameters in Crystal Structure of Ceramic Composites based on ZrO2(MgO) – CaSiO3 System

Creators

  • 1. Assistant Professor, Industrial Design Department, Faculty of Architecture and Creative Arts, Rajamangala University of Technology Isan (RMUTI), Nakhon Ratchasima, Thailand.

Contributors

  • 1. Assistant Professor, Industrial Design Department, Faculty of Architecture and Creative Arts, Rajamangala University of Technology Isan (RMUTI), Nakhon Ratchasima, Thailand.
  • 2. Professor & Head of the Department of Strength Theory and Design of the Physics and Engineering Faculty of the National Research Tomsk State University, Tomsk, Russian Federation.
  • 3. Assistant Professor, Industrial Engineering Department, Faculty of Engineering and Technology, Rajamangala University of Technology Isan (RMUTI), Nakhon Ratchasima, Thailand.

Description

Abstract: The synthesis and characterization of ceramic composites based on the ZrO₂(MgO)–CaSiO₃ system were investigated, focusing on their phase composition, crystal structure, and lattice parameters. The results demonstrate that sintering temperature and increasing wollastonite content significantly influence the structural formation, complex phase composition, and phase transformations within the ZrO₂(MgO)–CaSiO₃ system. The phase composition of ZrO₂ and CaSiO₃ was analyzed across sintering temperatures ranging from 1000°C to 1650°C and wollastonite contents of 1–25 vol.%. The samples exhibited five distinct phases: tetragonal, cubic, and monoclinic phases of zirconium dioxide, along with monoclinic and triclinic phases of wollastonite. Notably, the interplanar spacings of the m-ZrO₂ and m-CaSiO₃ phases changed markedly within the 1200–1300°C sintering range. This is attributed to intensive interfacial interactions between zirconium dioxide and wollastonite, resulting in alterations to the structural state of the composites, phase composition, phase distribution, and lattice parameters of the zirconium dioxide and wollastonite phases.

Files

D0453064420.pdf

Files (554.8 kB)

Name Size Download all
md5:27a8e8aaf1011b45fccda6af7634c776
554.8 kB Preview Download

Additional details

Identifiers

DOI
10.35940/ijese.D0453.13030225
EISSN
2319-6378

Dates

Accepted
2025-02-15
Manuscript received on 10 October 2024 | First Revised Manuscript received on 31 December 2024 | Second Revised Manuscript received on 09 January 2025 | Manuscript Accepted on 15 February 2025 | Manuscript published on 28 February 2025.

References

  • Duangsupa, C., Kulkov, S.N. "Structure and mechanical properties of ZrO₂(MgO) – CaSiO₃ composites." Proceedings - 2012 7th International Forum on Strategic Technology (IFOST 2012), pp. 368–371. doi: https://doi.org/10.1109/IFOST.2012.6357572
  • Duangsupa, C., Kulkov, S.N. "Structure and properties of ZrO₂(MgO) – CaSiO₃ ceramics composites." Journal of Advanced Research in Dynamical and Control Systems, 2020, 12(4 Special Issue), pp. 733–737. doi: https://doi.org/10.5373/JARDCS/V12SP4/20201540
  • Hannink, R. H. J. "Transformation Toughening in Zirconia-Containing Ceramics," Journal of the American Ceramic Society, v.83, №3, pp. 461–487, 2000. doi: https://doi.org/10.1111/j.1151-2916.2000.tb01221.x
  • Yamanaka, B. T., Mori, H. "The Structure and Polytypes of a-CaSiO₃ (Pseudowollastonite)." Acta Crystallographica, v.37, pp. 1010–1017, 1981. doi: https://doi.org/10.1107/S0567740881005020
  • Garvie, R. C., Hannink, R. H., Pascoe, R. T. "Ceramic Steel," Nature, v.258, pp. 703–704, 1975. Doi https://doi.org/10.1007/978-94-009-0741-6_14
  • Evans, A.G., Cannon, R.M. Toughening of brittle solids by martensitic transformations. Acta Metallurgica, Vol. 34, pp. 761–800, 1986. doi: https://doi.org/10.1016/0001-6160(86)90052-0
  • Aksay, I.A., Pask, J.A. "Stable and metastable equilibrium in the system SiO₂–Al₂O₃." Journal of the American Ceramic Society, Vol. 58, No. 11-12, pp. 507–512, 1975. doi: https://doi.org/10.1111/j.1151-2916.1975.tb18770.x
  • Garvie, R.C., Nicholson, P.S. "Structure and thermodynamical properties of partially stabilized zirconia in the CaO–ZrO₂ system." Journal of the American Ceramic Society, Vol. 55, pp. 152–157, 1972. doi: https://doi.org/10.1111/j.1151-2916.1972.tb11241.x
  • Betz, U., Sturm, A., Loeffler, J.F., Wagner, W., Wiedenmann, A., Hahn, H. "Low-temperature isothermal sintering and microstructural characterization of nanocrystalline zirconia ceramics using small angle neutron scattering." Nanostructured Materials, Vol. 12, pp. 689–692, 1999. doi: https://doi.org/10.1016/S0965-9773(99)00218-4
  • Kul'kov, S.N., Maslovskii, V.I., Buyakova, S.P. et al. "The non-Hooke's behavior of porous zirconia subjected to high-rate compressive deformation." Tech. Phys. 47, 320–324 (2002). doi: https://doi.org/10.1134/1.1463121
  • Jessica A. Krogstad, Maren Lepple, Yan Gao, Don M. Lipkin, Carlos G. Levi. "Effect of Yttria Content on the Zirconia Unit Cell Parameters." Journal of the American Ceramic Society, Vol. 94, №12, pp. 4548–4555, 2011. doi: https://doi.org/10.1111/j.1551-2916.2011.04862.x
  • W. Pabst, E. Gregorova, Christoph. Particle shape and suspension rheology of short-fiber systems. Journal of the European Ceramic Society, Vol. 26, №1–2, pp. 149–160, 2006. doi: https://doi.org/10.1016/j.jeurceramsoc.2004.10.016
  • Rieth, P.H., Reed, J.S., Naumann, A.W. "Fabrication and flexural strength of ultra-fine-grained Yttria-stabilized zirconia." Journal of the American Ceramic Society, Vol. 55, №8, pp. 717, 1976. https://inis.iaea.org/search/search.aspx?orig_q=RN:8295920
  • Savchenko, N.L., Sablina, T.Y., Sevost'yanova, I.N. et al. "The Effect of Porosity and Grain Size on the Phase Composition and Mechanical Properties of Zirconium-Dioxide-Based Ceramic." Tech. Phys. Lett. 44, 663–666 (2018). doi: https://doi.org/10.1134/S1063785018080096
  • Buyakova, S.P., Wei, H., Dunmy, L. et al. "Mechanical behavior of porous zirconium dioxide under active deformation by compression." Tech. Phys. Lett. 25, 695–696 (1999). doi: https://doi.org/10.1134/1.1262602
  • H. Toraya. "Array type universal profile function for powder pattern fitting." Journal of Applied Crystallography, Vol. 19, pp. 485–491, 1986. doi: https://doi.org/10.1107/S002188989000704X.
  • R.J. Hill, C.J. Howard. "Quantitative phase analysis from neutron powder diffraction data using the Rietveld method." Journal of Applied Crystallography," Vol. 20, pp. 467–474, 1987. doi: https://doi.org/10.1107/S0021889887086199
  • Nikitin, D.S., Zhukov, V.A., Perkov, V.V. et al. "Preparation of Porous Ceramics from Nanocrystalline Zirconia and Their Microstructure." Inorganic Materials 40, 760–763 (2004). doi: https://doi.org/10.1023/B:INMA.0000034778.00156.a0