Published February 28, 2024 | Version CC-BY-NC-ND 4.0
Journal article Open

A Comparative Study of Quality of Service (QoS) Metrics in Reactive Routing Protocols DSR and AODV in Manet

Creators

  • 1. Department of Engineer Specialist in Communication Networks and Switching Systems, State University of Belgorod Russia, Master in international sciences and diplomacy, Ecuador, Researcher at the Universidad Nacional de Loja, Department of Telecommunications.

Contributors

Contact person:

  • 1. Department of Engineer Specialist in Communication Networks and Switching Systems, State University of Belgorod Russia, Master in international sciences and diplomacy, Ecuador, Researcher at the Universidad Nacional de Loja, Department of Telecommunications.
  • 2. Department of Electronics and Telecommunications Engineer, Universidad Nacional de Loja, Ecuador, Department of Electronics and Telecommunications. Loja, Ecuador
  • 3. Department of Architect and Master in Architecture and New Urbanism. Her Professional and Academic Career in Urban and Architectural. At Universidad Católica de Santiago de Guayaquil, Guayaaquil, Ecuador.
  • 4. Department of ESPOL Polytechnic University, Escuela Superior Politécnica del Litoral, ESPOL, Faculty of Natural Sciences and Mathematics, Guayaquil, Ecuador

Description

Abstract: This study is based on the analysis of specific Quality of Service (QoS) metrics. The acquisition of these metrics was carried out by modifying codes in C++ language within the Ns3 network simulation software. The choice of the Random Way Point mobility model contributed to the generation of metrics, which were subsequently used in the evaluation and comparison of two selected protocols, DSR and AODV. These evaluations focused on critical parameters such as Throughput, Delay, and Jitter. To conduct meaningful comparisons, three different scenarios were designed, each characterized by the variation in the number of nodes used. This approach allowed for a comprehensive assessment of the protocols' effectiveness in different MANET network configurations. Ultimately, the selection of the most accurate protocols was based on a detailed analysis of metrics in various MANET scenarios. This process provided a deeper understanding of how DSR and AODV perform in specific environments, enabling the identification of more effective protocols according to the particular demands of each scenario.

Files

C256012030224.pdf

Files (797.8 kB)

Name Size Download all
md5:af6d337fad4951c21d7fe95507562c97
797.8 kB Preview Download

Additional details

Identifiers

DOI
10.35940/ijese.C2560.12030224

Dates

Accepted
2024-02-15
Manuscript received on 16 January 2024 | Revised Manuscript received on 27 January 2024| Manuscript Accepted on 15 February 2024 | Manuscript published on 28 February 2024.

References

  • G. O. Young, "Synthetic structure of industrial plastics (Book style with paper title and editor)," in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
  • W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA: Wadsworth, 1993, pp. 123–135.
  • H. Poor, An Introduction to Signal Detection and Estimation. New York: Springer-Verlag, 1985, ch. 4.
  • B. Smith, "An approach to graphs of linear forms (Unpublished work style)," unpublished.
  • E. H. Miller, "A note on reflector arrays (Periodical style—Accepted for publication)," IEEE Trans. Antennas Propagat., to be published.
  • J. Wang, "Fundamentals of erbium-doped fiber amplifiers arrays (Periodical style—Submitted for publication)," IEEE J. Quantum Electron., submitted for publication.
  • Ganesh, Dr. E. N. (2022). Analysis of Fracture and Toughness of a Denture Base with Polyvinyl Fibers. In International Journal of Advanced Pharmaceutical Sciences and Research (Vol. 2, Issue 2, pp. 1–4). https://doi.org/10.54105/ijapsr.c4004.022222
  • Prabhanjan, N., Pawar, P., Tipraj, Alok, G., & Md. Asif. (2020). Strengthening Properties of Concrete with Partial Replacement of Sand by GBFS. In International Journal of Innovative Technology and Exploring Engineering (Vol. 9, Issue 4, pp. 1746–1751). https://doi.org/10.35940/ijitee.d1670.029420
  • Patidar, C. P., Katara, Y., & Sharma, Dr. M. (2020). Hybrid News Recommendation System using TF-IDF and Similarity Weight Index. In International Journal of Soft Computing and Engineering (Vol. 10, Issue 3, pp. 5–9). https://doi.org/10.35940/ijsce.c3471.1110320
  • Razak, R. R. A., Sanusi, Z. A., Yusoff, A. N. M., & Isa, N. A. M. (2020). Spirituality and Quality of Life Among University Students During Covid-19 Pandemic. In International Journal of Management and Humanities (Vol. 5, Issue 2, pp. 4–9). https://doi.org/10.35940/ijmh.b1142.105220
  • Said, J. M., Ismail, M. H., & Abidin, N. A. Z. (2019). Additive Manufacturing of 316L Stainless Steel. In International Journal of Recent Technology and Engineering (IJRTE) (Vol. 8, Issue 4, pp. 6825–6829). https://doi.org/10.35940/ijrte.d5199.118419