Fracture Dielectric Elastomers

This dataset contains the experimental raw data from the mechanical and electro-mechanical testing of soft dielectric elastomers: unfilled PDMS and BaTiO3-filled PDMS. The data have not been filtered. 

Every specimen is tested under tensile loading until full rupture. 
All specimens had a thickness of 3mm. The initial length between grips was set to 40mm. 

The files are named according to:
- the type of sample (Unfilled_PDMS/BaTiO3_Filled),
- the width of the sample (w30mm/w50mm),
- the length of the pre-cut (c0mm/c3mm/c5mm/c6mm/c9mm/c10mm/c12mm/c15mm/c20mm/c25mm),
- the voltage applied in the thickness direction during tensile deformation (0kV/4kV/8kV),
- and the number of the experiment up to the total number of repetitions under the same test conditions (R1/R2/R3 for filled samples and R1/R2 for unfilled samples).

If this dataset is used for research or industrial purposes, please cite:
M.A. Moreno-Mateos, M. Mehnert, P. Steinmann. "Electro-mechanical actuation modulates fracture performance of soft dielectric elastomers", International Journal of Engineering Science, vol.195, 104008. (2024). https://doi.org/10.1016/j.ijengsci.2023.104008
Further explanation regarding the specimen preparation and experimental setup can be found in the aforementioned work.