Info: Zenodo’s user support line is staffed on regular business days between Dec 23 and Jan 5. Response times may be slightly longer than normal.

Published May 31, 2022 | Version v1
Journal article Open

Design and practice of simple first-order all-pass filters using commercially available IC and their applications

Creators

  • 1. Rajamangala University of Technology Isan

Description

First-order all-pass filter circuits, both non-inverting and inverting, could be the focus of this article, which could include the design and implementation of first-order all-pass filter circuits. Using a standard integrated circuit (IC): AD830, as well as a single resistor and a single capacitor, the proposed first-order all-pass filters could well be built. The AD830 is an integrated circuit (IC) manufactured by Analog Devices Corporation that is available for purchase. The pole frequency and phase response of the proposed all-pass filters could well be directly modified by attuning the resistor in the circuit. Aside from that, the output voltage has a low impedance, making it appropriate for use in voltage-mode circuits. In addition, the proposed first-order all-pass filter is used to design the multiphase sinusoidal oscillator, which serves as an example of an application wherein the oscillation condition can be adjusted without impacting the frequency. The gain and phase responses of the proposed all-pass filters, as well as their phase response adjustment, time-domain response, and total harmonic distortion of signals, are all shown via computer simulation using the PSPICE software, as well as their experimental results. For the proposed circuits, a statistical analysis is coupled with a Monte Carlo simulation to estimate the performance of the circuits. In accordance with the results of this study, a theoretical design suitable for developing a worksheet for teaching and learning in electrical and electronic engineering laboratories has already been developed

Files

Design and practice of simple first-order all-pass filters using commercially available IC and their applications_zenodo.pdf

Files (1.7 MB)

Additional details

References

  • Yuce, E., Verma, R., Pandey, N., Minaei, S. (2019). New CFOA-based first-order all-pass filters and their applications. AEU - International Journal of Electronics and Communications, 103, 57–63. doi: https://doi.org/10.1016/j.aeue.2019.02.017
  • Maheshwari, S. (2004). New voltage and current-mode APS using current controlled conveyor. International Journal of Electronics, 91 (12), 735–743. doi: https://doi.org/10.1080/00207210412331332880
  • Chaichana, A., Siripongdee, S., Jaikla, W. (2019). Electronically Adjustable Voltage-mode First-order Allpass Filter Using Single Commercially Available IC. IOP Conference Series: Materials Science and Engineering, 559 (1), 012009. doi: https://doi.org/10.1088/1757-899x/559/1/012009
  • Yucel, F., Yuce, E. (2015). A new single CCII- based voltage-mode first-order all-pass filter and its quadrature oscillator application. Scientia Iranica, 22 (3), 1068–1076. Available at: http://scientiairanica.sharif.edu/article_3700.html
  • Horng, J.-W., Hou, C.-L., Chang, C.-M., Lin, Y.-T., Shiu, I.-C., Chiu, W.-Y. (2006). First-order allpass filter and sinusoidal oscillators using DDCCs. International Journal of Electronics, 93 (7), 457–466. doi: https://doi.org/10.1080/00207210600711481
  • Herencsar, N., Minaei, S., Koton, J., Yuce, E., Vrba, K. (2012). New resistorless and electronically tunable realization of dual-output VM all-pass filter using VDIBA. Analog Integrated Circuits and Signal Processing, 74 (1), 141–154. doi: https://doi.org/10.1007/s10470-012-9936-2
  • Pandey, N., Pandey, R., Paul, S. K. (2012). A first order all pass filter and its application in a quadrature oscillator. Journal of Electron Devices, 12, 772–777. Available at: https://silo.tips/download/a-first-order-all-pass-filter-and-its-application-in-a-quadrature-oscillator
  • Horng, J.-W. (2005). Current conveyors based allpass filters and quadrature oscillators employing grounded capacitors and resistors. Computers & Electrical Engineering, 31 (1), 81–92. doi: https://doi.org/10.1016/j.compeleceng.2004.11.006
  • Mohan, J., Maheshwari, S., Chauhan, D. S. (2010). Voltage Mode Cascadable AllPass Sections Using Single Active Element and Grounded Passive Components. Circuits and Systems, 01 (01), 5–11. doi: https://doi.org/10.4236/cs.2010.11002
  • Maheshwari, S., Mohan, J., Chauhan, D. S. (2010). Voltage-mode cascadable all-pass sections with two grounded passive components and one active element. IET Circuits, Devices & Systems, 4 (2), 113. doi: https://doi.org/10.1049/iet-cds.2009.0167
  • Pandey, R., Pandey, N., Mullick, R., Yadav, S., Anurag, R. (2015). All Pass Network Based MSO Using OTRA. Advances in Electronics, 2015, 1–7. doi: https://doi.org/10.1155/2015/382360
  • Chaturvedi, B., Maheshwari, S. (2012). An ideal voltage-mode all-pass filter and its application. Journal of Communication and Computer, 9, 613–623. Available at: https://www.researchgate.net/publication/237018593_An_ideal_voltage_mode_all-pass_filter_and_its_applications_JCC
  • Senani, R., Bhaskar, D. R., Kumar, P. (2021). Two-CFOA-grounded-capacitor first-order all-pass filter configurations with ideally infinite input impedance. AEU - International Journal of Electronics and Communications, 137, 153742. doi: https://doi.org/10.1016/j.aeue.2021.153742
  • Toker, A., Gune, E. O., Ozoguz, S. (2001). New high-Q band-pass filter configuration using current controlled current conveyor based all-pass filters. ICECS 2001. 8th IEEE International Conference on Electronics, Circuits and Systems (Cat. No.01EX483). doi: https://doi.org/10.1109/icecs.2001.957706
  • Biolek, D., Biolkova, V., Kolka, Z. (2010). All-Pass filter employing fully balanced voltage differencing buffered amplifier. IEEE Latin American Symposium on Circuits and Systems, 232–235. Available at: https://user.unob.cz/Biolek/veda/articles/LASCAS2010_1.pdf
  • Tangsrirat, W., Pukkalanun, T., Surakampontorn, W. (2010). Resistorless realization of current-mode first-order allpass filter using current differencing transconductance amplifiers. Microelectronics Journal, 41 (2-3), 178–183. doi: https://doi.org/10.1016/j.mejo.2010.02.001
  • Kumngern, M. (2012). Realization of electronically tunable first-order allpass filter using single-ended OTAs. 2012 IEEE Symposium on Industrial Electronics and Applications. doi: https://doi.org/10.1109/isiea.2012.6496607
  • Kumngern, M., Chanwutitum, J. (2012). Voltage-mode first-order allpass filter using single-ended OTAs and grounded capacitor. 2012 Second International Conference on Digital Information and Communication Technology and It's Applications (DICTAP). doi: https://doi.org/10.1109/dictap.2012.6215363
  • Maneewan, S., Udorn, N., Silapan, P., Duangmalai, D., Jaikla, W. (2014). A Voltage-Mode First Order Allpass Filter Based on VDTA. Advances in Electrical and Electronic Engineering, 12 (1). doi: https://doi.org/10.15598/aeee.v12i1.846
  • Bajer, J., Biolek, D. (2010). Voltage-mode electronically tunable all-pass filter employing CCCII+, One capacitor and differential-input voltage buffer. 2010 IEEE 26-Th Convention of Electrical and Electronics Engineers in Israel. doi: https://doi.org/10.1109/eeei.2010.5661939
  • Tsukutani, T., Tsunetsugu, H., Sumi, Y., Yabuki, N. (2010). Electronically tunable first-order all pass sections using OTAs. 2010 International Conference on Computer Applications and Industrial Electronics. doi: https://doi.org/10.1109/iccaie.2010.5735141
  • Uttaphut, P. (2019). Voltage-Mode First-Order Allpass Filter with Grounded Capacitor and Electronic Controllability. PRZEGLĄD ELEKTROTECHNICZNY, 1 (3), 103–106. doi: https://doi.org/10.15199/48.2019.03.24
  • Herencsar, N., Koton, J., Vrba, K., Metin, B. (2011). Novel voltage conveyor with electronic tuning and its application to resistorless all-pass filter. 2011 34th International Conference on Telecommunications and Signal Processing (TSP). doi: https://doi.org/10.1109/tsp.2011.6043729
  • Pandey, N., Arora, P., Kapur, S., Malhotra, S. (2011). First order voltage mode MO-CCCCTA based all pass filter. 2011 International Conference on Communications and Signal Processing. doi: https://doi.org/10.1109/iccsp.2011.5739380
  • Maheshwari, S. (2007). Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits. Active and Passive Electronic Components, 2007, 1–5. doi: https://doi.org/10.1155/2007/79159
  • Shah, N. A., Rather, M. F. (2006). Realization of voltage-mode CCII-based all pass filter and its inverse version. Indian Journal of Pure and Applied Physics, 44, 269–271.
  • Janda, T., Onsa-ard, W., Jantakun, A. (2018). The Realization of Four-mode First-order Allpass Filter Based-on CCCCTAs. Proceedings of the 10th International Conference on Sciences, Technology and Innovation for Sustainable Well-Being (STISWB 2018).
  • Kumngern, M., Mongkol, V., Junnapiya, S. (2013). Voltage-mode allpass section employing only one DDCCTA and one capacitor. 2013 Eleventh International Conference on ICT and Knowledge Engineering. doi: https://doi.org/10.1109/ictke.2013.6756279
  • Kaçar, F., Özcelep, Y. (2011). CDBA Based Voltage-Mode First-Order All-pass Filter Topologies. IU-Journal of Electrical & Electronics Engineering, 11 (1), 1327–1332. Available at: https://dergipark.org.tr/en/download/article-file/99242
  • High speed, video difference amplifier. Data Sheet AD830. Available at: https://www.analog.com/media/en/technical-documentation/data-sheets/AD830.pdf