Info: Zenodo’s user support line is staffed on regular business days between Dec 23 and Jan 5. Response times may be slightly longer than normal.

Published June 30, 2022 | Version v1
Journal article Open

The use of polyethylene terephthalate waste as modifiers for bitumen systems

Creators

  • 1. Satbayev University
  • 2. Toraighyrov University
  • 3. International Educational Corporation

Description

This study examined the suitability of polyethylene terephtal (PET) waste to provide an alternative modification to bitumen and reduce waste accumulation. The chemical structure and physical properties were evaluated for modified bitumen with different PET flakes content from 2 to 10 %. The effect of PET waste content on bituminous systems was analyzed using IR and 1H NMR spectroscopy, differential thermal (DTA) and thermogravimetric (TGA) analyses. The study of change in the microstructure as a result of bitumen modification was carried out using atomic force microscopy (AFM). Regularities of changes in the structural-group composition of bituminous binders after their modification with PET waste have been established. It is noted that the chemical interaction of the base bitumen with PET  flakes occurs due to the formation of associative bonds between the oxygen-containing components of the modifier and bitumen.

The influence of the modifier on the physical and mechanical properties was evaluated using standard methods (penetration, extensibility and softening point). Based on the physical and mechanical properties of bitumen, such as needle penetration depth (penetration), ductility and softening point, it was found that the optimal dosage of PET waste in terms of asphalt binder characteristics is 3 %. It has been established that PET waste and original bitumen interact both at the chemical and physical levels and can be considered as a suitable alternative for changing the properties of bituminous binders. Thus, the obtained samples of modified bituminous binders have improved physical and mechanical properties, which makes it possible to produce high-strength asphalt concrete pavements based on them.

Files

The use of polyethylene terephthalate waste as modifiers for bitumen systems.pdf

Files (781.8 kB)

Additional details

References

  • Geyer, R., Jambeck, J. R., Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3 (7). doi: https://doi.org/10.1126/sciadv.1700782
  • Sharma, R., Bansal, P. P. (2016). Use of different forms of waste plastic in concrete – a review. Journal of Cleaner Production, 112, 473–482. doi: https://doi.org/10.1016/j.jclepro.2015.08.042
  • Demarteau, J., Olazabal, I., Jehanno, C., Sardon, H. (2020). Aminolytic upcycling of poly (ethylene terephthalate) wastes using a thermally-stable organocatalyst. Polymer Chemistry, 11 (30), 4875–4882. doi: https://doi.org/10.1039/d0py00067a
  • Andrady, A. L. (2011). Microplastics in the marine environment. Marine Pollution Bulletin, 62 (8), 1596–1605. doi: https://doi.org/10.1016/j.marpolbul.2011.05.030
  • Rorrer, N. A., Nicholson, S., Carpenter, A., Biddy, M. J., Grundl, N. J., Beckham, G. T. (2019). Combining Reclaimed PET with Bio-based Monomers Enables Plastics Upcycling. Joule, 3 (4), 1006–1027. doi: https://doi.org/10.1016/j.joule.2019.01.018
  • Kárpáti, L., Fogarassy, F., Kovácsik, D., Vargha, V. (2019). One-Pot Depolymerization and Polycondensation of PET Based Random Oligo- and Polyesters. Journal of Polymers and the Environment, 27 (10), 2167–2181. doi: https://doi.org/10.1007/s10924-019-01490-3
  • Nguyet Thi Ho, L., Minh Ngo, D., Cho, J., Jung, H. M. (2018). Enhanced catalytic glycolysis conditions for chemical recycling of glycol-modified poly(ethylene terephthalate). Polymer Degradation and Stability, 155, 15–21. doi: https://doi.org/10.1016/j.polymdegradstab.2018.07.003
  • Merkel, D. R., Kuang, W., Malhotra, D., Petrossian, G., Zhong, L., Simmons, K. L. et. al. (2020). Waste PET Chemical Processing to Terephthalic Amides and Their Effect on Asphalt Performance. ACS Sustainable Chemistry & Engineering, 8 (14), 5615–5625. doi: https://doi.org/10.1021/acssuschemeng.0c00036
  • Dweik, H. S., Ziara, M. M., Hadidoun, M. S. (2008). Enhancing Concrete Strength and Thermal Insulation Using Thermoset Plastic Waste. International Journal of Polymeric Materials and Polymeric Biomaterials, 57 (7), 635–656. doi: https://doi.org/10.1080/00914030701551089
  • Panyakapo, P., Panyakapo, M. (2008). Reuse of thermosetting plastic waste for lightweight concrete. Waste Management, 28 (9), 1581–1588. doi: https://doi.org/10.1016/j.wasman.2007.08.006
  • Kociołek-Balawejder, E. (2013). PET czyli poli(tereftalan etylenu) produkcja, zastosowanie, recykling.
  • Saikia, N., de Brito, J. (2012). Use of plastic waste as aggregate in cement mortar and concrete preparation: A review. Construction and Building Materials, 34, 385–401. doi: https://doi.org/10.1016/j.conbuildmat.2012.02.066
  • Jailani, N., Ibrahim, A. N. H., Rahim, A., Abdul Hassan, N., Md. Yusoff, N. I. (2021). Chemical and physical properties of poly (lactic) acid modified bitumen. Ain Shams Engineering Journal, 12 (3), 2631–2642. doi: https://doi.org/10.1016/j.asej.2021.03.004
  • Aitkaliyeva, G. S., Yelubay, M. A., Ismailova, A. B., Yerzhanova, D. S., Massakbayeva, S. R. (2022). Polymeric modifiers for bituminous binders. Bulletin of Kazakh Leading Academy of Architecture and Construction, 83 (1), 98–106. doi: https://doi.org/10.51488/1680-080x/2022.1-02
  • Han, Z., Wang, Y., Wang, J., Wang, S., Zhuang, H., Liu, J. et. al. (2018). Preparation of Hybrid Nanoparticle Nucleating Agents and Their Effects on the Crystallization Behavior of Poly(ethylene terephthalate). Materials, 11 (4), 587. doi: https://doi.org/10.3390/ma11040587
  • Polacco, G., Stastna, J., Biondi, D., Zanzotto, L. (2006). Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts. Current Opinion in Colloid & Interface Science, 11 (4), 230–245. doi: https://doi.org/10.1016/j.cocis.2006.09.001
  • Du, C., Liu, P., Ganchev, K., Lu, G., Oeser, M. (2021). Influence of microstructure evolution of bitumen on its micromechanical property by finite element simulation. Construction and Building Materials, 293, 123522. doi: https://doi.org/10.1016/j.conbuildmat.2021.123522
  • Chacón-Patiño, M. L., Smith, D. F., Hendrickson, C. L., Marshall, A. G., Rodgers, R. P. (2020). Advances in Asphaltene Petroleomics. Part 4. Compositional Trends of Solubility Subfractions Reveal that Polyfunctional Oxygen-Containing Compounds Drive Asphaltene Chemistry. Energy & Fuels, 34 (3), 3013–3030. doi: https://doi.org/10.1021/acs.energyfuels.9b04288
  • Appiah, J. K., Berko-Boateng, V. N., Tagbor, T. A. (2017). Use of waste plastic materials for road construction in Ghana. Case Studies in Construction Materials, 6, 1–7. doi: https://doi.org/10.1016/j.cscm.2016.11.001
  • Sengoz, B., Topal, A., Isikyakar, G. (2009). Morphology and image analysis of polymer modified bitumens. Construction and Building Materials, 23 (5), 1986–1992. doi: https://doi.org/10.1016/j.conbuildmat.2008.08.020