Info: Zenodo’s user support line is staffed on regular business days between Dec 23 and Jan 5. Response times may be slightly longer than normal.

Published December 29, 2021 | Version v1
Journal article Open

Establishment of the dependence of the strength indicator of the composite material of pressure hoses on the character of single damages

Creators

  • 1. National University of Civil Defence of Ukraine
  • 2. Military Academy
  • 3. State Higher Education Institution «Ukrainian State University of Chemical Technology»
  • 4. National Technical University "Kharkiv Polytechnic Institute"

Description

Experimental studies are presented and the dependence of the change in the strength of the material of a pressure head fire hose of type T with an inner diameter of 77 mm in the longitudinal direction is established, taking into account single damages. The work describes the plan of the experiment and carried out a number of field experiments to determine the effect of the length ld and the depth K damage on the strength F of the hose material, that is, obtaining the dependence F=f (ld, K). A mathematical method of experiment planning was used and a plan was drawn up for a complete multivariate experiment of type 2k with an acceptable model accuracy of 5 %. The limits of variation of the factors are set taking into account a priori information, experimental capabilities and on the basis of the results of preliminary search experiments. The dependence in the coded and natural values of the factors is obtained. The reliability of the relationship was checked using the Fisher test, the calculated value of which was 5.98, which confirms the adequacy of the described process with a probability of 95 %.

Analyzing experimental studies of the dependence of the change in the strength of the hose material on the length and depth of damage, it can be said that the change in the strength of the hose almost linearly depends on the specified damage parameters. It is found that with increasing damage, the strength of the hose material significantly decreases. When varying the length factor and the greatest depth of damage, K=0.4 mm, the strength of the hose material decreases from 11.67 kN to 8.77 kN, and in percentage terms by 25 %.

The results obtained can be used in practical units of emergency rescue teams, when diagnosing hidden damage in pressure head fire hoses in order to prevent their failure in case of fires

Files

Establishment of the dependence of the strength indicator of the composite material of pressure hoses on the character of single damages.pdf

Files (1.0 MB)

Additional details

References

  • Tiutiunyk, V. V., Ivanets, H. V., Tolkunov, I. A., Stetsyuk, E. I. (2018). System approach for readiness assessment units of civil defense to actions at emergency situations. Scientific Bulletin of National Mining University, 1, 99–105. doi: http://doi.org/10.29202/nvngu/2018-1/7
  • Larin, O. O. (2015). Probabilistic Model of Fatigue Damage Accumulation in Rubberlike Materials. Strength of Materials, 47 (6), 849–858. doi: http://doi.org/10.1007/s11223-015-9722-3
  • Larin, A. A., Vyazovichenko, Y. A., Barkanov, E., Itskov, M. (2018). Experimental Investigation of Viscoelastic Characteristics of Rubber-Cord Composites Considering the Process of Their Self-Heating. Strength of Materials, 50 (6), 841–851. doi: http://doi.org/10.1007/s11223-019-00030-7
  • Cho, J. ., Yoon, Y. H., Seo, C. W., Kim, Y. G. (2015). Fatigue life assessment of fabric braided composite rubber hose in complicated large deformation cyclic motion. Finite Elements in Analysis and Design, 100, 65–76. doi: http://doi.org/10.1016/j.finel.2015.03.002
  • Cho, J.-R., Yoon, Y.-H. (2016). Large deformation analysis of anisotropic rubber hose along cyclic path by homogenization and path interpolation methods. Journal of Mechanical Science and Technology, 30 (2), 789–795. doi: http://doi.org/10.1007/s12206-016-0134-5
  • Traxl, R., Mungenast, D., Schennach, O., Lackner, R. (2019). Mechanical performance of textile-reinforced hoses assessed by a truss-based unit cell model. International Journal of Engineering Science, 141, 47–66. doi: http://doi.org/10.1016/j.ijengsci.2019.05.006
  • Fedorko, G., Molnar, V., Dovica, M., Toth, T., Fabianova, J. (2015). Failure analysis of irreversible changes in the construction of the damaged rubber hoses. Engineering Failure Analysis, 58, 31–43. doi: http://doi.org/10.1016/j.engfailanal.2015.08.042
  • Yoo, D.-H., Jang, B.-S., Yim, K.-H. (2017). Nonlinear finite element analysis of failure modes and ultimate strength of flexible pipes. Marine Structures, 54, 50–72. doi: http://doi.org/10.1016/j.marstruc.2017.03.007
  • Potopalska, K., Tyshkovets, O., Kalinovskyi, A., Vasyliev, S. (2021). An Experimental Study on Elastic and Strength Properties of Addictively-Manufactured Plastic Materials. Materials Science Forum, 1038, 162–167. doi: http://doi.org/10.4028/www.scientific.net/msf.1038.162
  • Arunachala, P. K., Rastak, R., Linder, C. (2021). Energy based fracture initiation criterion for strain-crystallizing rubber-like materials with pre-existing cracks. Journal of the Mechanics and Physics of Solids, 157. doi: http://doi.org/10.1016/j.jmps.2021.104617
  • Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A., Pinter, G. (2021). Effect of mechanical loading history on fatigue crack growth of non-crystallizing rubber. Engineering Fracture Mechanics, 257. doi: http://doi.org/10.1016/j.engfracmech.2021.108010
  • Larin, O., Morozov, O., Nazarenko, S., Chernobay, G., Kalynovskyi, A., Kovalenko, R. et. al. (2019). Determining mechanical properties of a pressure fire hose the type of «T». Eastern-European Journal of Enterprise Technologies, 6 (7 (102)), 63–70. doi: http://doi.org/10.15587/1729-4061.2019.184645
  • Nazarenko, S., Kovalenko, R., Gavryliuk, A., Vinogradov, S., Kryvoshei, B., Pavlenko, S. et. al. (2021). Determining the dissipative properties of a flexible pipeline's material at stretching in the transverse direction taking its structural elements into consideration. Eastern-European Journal of Enterprise Technologies, 2 (1 (110)), 12–20. doi: http://doi.org/10.15587/1729-4061.2021.227039
  • Nazarenko, S., Kovalenko, R., Asotskyi, V., Chernobay, G., Kalynovskyi, A., Tsebriuk, I. et. al. (2020). Determining mechanical properties at the shear of the material of "T" type pressure fire hose based on torsion tests. Eastern-European Journal of Enterprise Technologies, 5 (7 (107)), 45–55. doi: http://doi.org/10.15587/1729-4061.2020.212269
  • Rogov, V. A., Pozniak, G. G. (2005). Metodika i praktika tekhnicheskikh eksperimentov. Moscow: ITS Akademiia, 288.
  • Box, G. E. P., Wilson, K. B. (1951). On the Experimental Attainment of Optimum Conditions. Journal of the Royal Statistical Society: Series B (Methodological), 13 (1), 1–38. doi: http://doi.org/10.1111/j.2517-6161.1951.tb00067.x
  • Edition, C. F., Jeff, Wu, Michael, S. Hamada J., Wiley S. (2011). Experiments: Planning, Analysis, and Optimization. Wiley, 760.