Planned intervention: On Thursday March 28th 07:00 UTC Zenodo will be unavailable for up to 5 minutes to perform a database upgrade.
Published February 29, 2020 | Version v1
Journal article Open

Substantiation of Parameters of the Fibrous Material Cleaning Zone

  • 1. Senior Lecturer (Ph.D.) Department of technological machines and equipment, Bukhara Engineering – Technological Institute. Bukhara, Uzbekistan.
  • 2. Candidate of Technical Sciences, Docent, Department technological machines and equipment, Bukhara Engineering – Technological Institute. Bukhara, Uzbekistan.
  • 3. The teacher Department of technological machines and equipment, Bukhara Engineering – Technological Institute.
  • 1. Publisher

Description

The article provides the scheme and principle of operation of the fiber material cleaning section when using multi-faceted cylinder spikes. Theoretically studied the movement of the fibrous mass on the surface of the edge of the cylinder splitting. The numerical solution of the problem substantiates the main recommended values of the parameters of the fibrous material cleaning zone. Full-factor experiments optimized the necessary system parameters. The article also investigates the influence of the annular cylinder parameters on the cleaning efficiency of the machine based on full factorial experiments. In this case, the following ring cylinder parameters are optimized: the number of revolutions is 455 rpm, the number of faces of the multifaceted spiky is 6, and the gap between the cylinder and the mesh surface is 16 mm.

Files

C5122029320.pdf

Files (674.7 kB)

Name Size Download all
md5:9d6b2163b9163610012f1a0a7a841611
674.7 kB Preview Download

Additional details

Related works

Is cited by
Journal article: 2249-8958 (ISSN)

Subjects

ISSN
2249-8958
Retrieval Number
C5122029320/2020©BEIESP