Published December 31, 2015 | Version v1
Taxonomic treatment Open

Cyphocaris ananke Hughes & Lowry, 2015, sp. nov.

Description

Cyphocaris ananke sp. nov.

(Figs 1–3)

Types. Holotype, female, 27.5 mm, (dissected, parts in vial), NMV J68202, 61 km east-north-east of Cape Tourville, Tasmania, Tasman Sea, Australia (4158.49'S 14904.41'E), 3 m Isaacs Kidd mid water trawl over bottom depth 1685–2524 m, 28 October 1988, coll. G.C.B. Poore et al., RV Franklin (stn SLOPE 75); Paratype 1 male specimen, 20.8 mm, (dissected, parts in vial), NMV J15794, 51 km south-south-west of Cape Otway, Victoria, western Bass Strait, Australia (39°16'S 143°17'E), 90 m, medium sand, 10 October 1980, coll. G.C.B. Poore, HMAS Kimbla (stn BSS-73).

Type locality. 61 km east-north-east of Cape Tourville, Tasmania, Tasman Sea, Australia (4158.49'S 14904.41'E).

Etymology. Named ‘Ananke’ from the Greek primordial deity for inevitability, compulsion and necessity, used as a noun in apposition.

Description. Based on holotype, female, 27.5 mm, NMV J68202. Body smooth, without setae. Pereonite 1 produced anterodorsally into a sharp projection , length subequal to basal width. Head narrow, much deeper than long, eyes present, rounded, not abutting anterior margin; rostrum absent; lateral cephalic lobe rounded concave, anteroventral corner subquadrate. Antenna 1 length extending beyond pereonite 6; peduncular article 1 longer than article 2–3 combined; accessory flagellum short, slender, 3–articulate, not reaching end of primary flagellum first article; primary flagellum article 1 very long, densely covered with aesthetascs, calceoli absent. Antenna 2 shorter than body; calceoli absent. Lower lip unknown. Mandibles, mandible incisor smooth, lacinia mobilis multidentate, accessory setal row with 5 (left) and 6 (right) setae; molar well-developed triturative; mandibular palp 3-articulate, article 1 much shorter than 2–3; article 2 posterior margin near straight, anterior margin with medial bulge, with dense row of submarginal setae distally, article 3 length 0.8 article 2, lined with dense row of slender setae. Maxilla 1 outer plate with 11 (right) setal teeth, palp (right) broad with 10 robust dentate setae, 1 plumose setae and 15 submarginal slender plumose setae; inner plate tapering distally, inner margin lined with 13 robust plumose setae. Maxilla 2 inner plate broad, triangular, with mediofacial and apical slender setae; outer plate with apical setae only. Maxilliped inner plate rectangular with 3 nodular apical robust setae, medial margin lined with plumose setae; outer plate subovate, apicolateral margin with long plumose setae, medial margin with 18 nodular robust setae; palp long, 4-articulate, articles 1–3 lined with long slender setae; article 1–2 length similar; article 3 shorter than article 2; dactylus length 1.1 article 3, straight, with 3 apical seta, unguis absent.

Pereon. Gnathopod 1 weakly subchelate; coxa small, ventrally truncate; basis long, length 4 width; ischium broader than long; merus posteriorly produced, rounded, posterior surface covered in short fine setae; carpus length 1.2 propodus; propodus length twice width, palm margin finely serrate, palm acute, not defined; dactylus posterior margin finely serrate, with distal spine, with 3 apical slender setae. Gnathopod 2 minutely subchelate; coxa tapering ventrally, truncate ventral margin; basis distally bowed, elongate, length 7.5 width; ischium length 3.5 width, merus length twice width; carpus length 2.5 x propodus, length 5 width, surface lined with short fine setae; propodus length 3 width, palm margin serrate, palm defined by corner with 2 robust setae; dactylus posterior margin smooth, with distal 1 tooth and 3 apical slender setae. Pereopod 3 slender, elongate; coxa subquadrate; basis slender straight; merus, carpus and propodus subequal in length; dactylus recurved, length 0.5 propodus. Pereopod 4 coxa anterior margin rounded, posteroventral lobe produced subacute; merus and carpus length subequal; propodus length 0.8 carpus, length 3 width. Pereopod 5 coxa subequal to coxa 4 ; basis posterior margin serrate, produced into blunt lobe, almost reaching end of merus; merus length 0.9 carpus, length 3 width; carpus 0.7 propodus, length 4.5 width; propodus length 11.5 width; dactylus short length 0.33 propodus, straight. Pereopod 6 coxa subquadrate; basis posterior margin serrate, posterodistal lobe reaches slightly beyond ischium, lobe margin serrate; merus length 0.9 carpus, length 3 width; carpus shorter than propodus, length 5.5 width, propodus long, length 15 width; dactylus slender, recurved, length 0.33 propodus. Pereopod 7 coxa ventral margin subquadrate; basis subrectangular, posterior margin convex, strongly serrate, posterodistal lobe reaching beyond ischium, corner serrate; merus subequal to carpus length; propodus length 1.1 carpus, length 7 width; dactylus long, straight, tapering, length 0.35 propodus.

Pleon. Pleonites 1–3 smooth. Epimeron 1 rounded. Epimera 2–3 subquadrate. Urosomite 2 with anterodorsal notch. Uropod 1 elongate, peduncle with 10 robust setae, length 4 width; outer ramus subequal to inner ramus. Uropod 2 reaching end of uropod 3; outer ramus subequal to inner ramus, 0.9 peduncle length, with 5 robust setae; inner ramus with 7 robust setae; rami lateral margins lined with fine setae. Uropod 3 reaching end of telson ; peduncle length 1.8 width, dorsal margin with long slender setae; rami foliaceous, subequal in length, lined with plumose swimming setae, outer ramus 2-articulate, article 2 small, length twice width. Telson elongate, deeply cleft to 85%, lobes tapering distally, lateral margins with 8 setae and distal notch.

Depth range. 90 m.

Remarks. Cyphocaris ananke sp. nov. is closely aligned to C. anonyx Boeck, 1871. Both species have a developed pereonite 1 protuberance and a short spur with serrate margins projecting from the posterior margin of pereopod 5. The species can be distinguished by the pereopod 4 coxa anterior shape, which is broadly rounded in C. ananke and subacute in C. anonyx. The telson is long and reached to the end of uropod 3 in C. ananke, while much shorter in C. anonyx. Within the mouthpart bundle of these species C. ananke has a greater number of setae overall, including on the maxilla 1 inner plate with 13 setae, maxilla 1 outer plate palp 10 robust setae and the maxilliped outer plate with 18 nodular setae, in comparison to C. anonyx which has 8, 7 to 8 and 9 setae, respectively. See also remarks for Cyphocaris nesoi sp. nov.

Distribution. SOUTH PACIFIC OCEAN. Australia: Victoria, Tasmania (current study).

Notes

Published as part of Hughes, Lauren E. & Lowry, James K., 2015, A review of the world Cyphocarididae with description of three new species (Crustacea, Amphipoda, Lysianassoidea), pp. 1-40 in Zootaxa 4058 (1) on pages 2-6, DOI: 10.11646/zootaxa.4058.1.1, http://zenodo.org/record/235526

Files

Files (7.6 kB)

Name Size Download all
md5:9d14f30a988abf7662dde0231e864806
7.6 kB Download

System files (21.2 kB)

Name Size Download all
md5:6a4433c239bad42fa7259488817af9f1
21.2 kB Download

Linked records

Additional details

Biodiversity

Family
Cyphocarididae
Genus
Cyphocaris
Kingdom
Animalia
Order
Amphipoda
Phylum
Arthropoda
Species
ananke
Taxonomic status
sp. nov.
Taxon rank
species
Taxonomic concept label
Cyphocaris ananke Hughes & Lowry, 2015

References

  • Boeck, A. (1871) Crustacea Amphipoda borealia et arctica. Forhandlinger i Videnskabs-Selskabet i Christiania, 1870, 81 - 280, i - viii [index].