Robotized assembly and inspection of composite fuselage panels: the LABOR project approach

IOP Conference Series: Materials Science and Engineering

PAPER • THE FOLLOWING ARTICLE ISOPEN ACCESS

Robotized assembly and inspection of composite fuselage panels: the LABOR project approach

Mario Caterino¹, Pasquale Chiacchio², Cristina Cristalli³, Marcello Fera¹, Gaetano Lettera¹, Ciro Natale¹ and Matteo Nisi³

Published under licence by IOP Publishing Ltd
IOP Conference Series: Materials Science and Engineering, Volume 1024, 10th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens (10th EASN 2020) 2nd-5th September 2020Citation Mario Caterino et al 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1024 012019

DownloadArticle PDF

References

Download PDF

112 Total downloads

Turn on MathJax

Share this article

Article information

Abstract

The aerospace manufacturing is looking at ways to change their production processes in order to improve costs, flexibility and efficiency. The LABOR project, acronym for Lean robotized AssemBly and cOntrol of composite aeRostructures, aims at introducing robotic solutions for the assembly line of fuselage panels adopting medium size robots equipped with smart tools, Human Robot collaboration approach and a distributed software architecture. The system consists of a jig that holds the panel to be assembled, two 6-axis robots mounted on moving platforms in order to reach the whole panel and real time measurements to perform the quality control of the assembled components. The cell automatically performs the referencing of the robot working area on the basis of the recognition of geometric features of the parts to be coupled (edges, holes, etc.) through the use of 3D smart inspection tools. After the "one shot" drilling and countersinking operations, the hole is processed to guarantee a high standard of the process. Installation and sealing of the fastener complete the working cycle. Furthermore, an advanced multimodal perception system monitors the collaborative workspace in real time for safe human-robot collaboration (HRC) tasks. The project started in March 2018 as part of the European Clean Sky 2 research program. Three partners – LOCCIONI, UNICAMPANIA and UNISA – are developing the prototype cell in collaboration with LEONARDO S.P.A. that is the Topic Manager.