Supplementary Data: "Dark matter, fine-tuning and mu(g-2) in the pMSSM" (arxiv 2104.03245)

The data consists of the output files of all the runs that were done. The files are organized in iterations, according to the iteration they were produced in. The map name within one iteration is labeled by the "Barbieri-Giudice fine-tuning measure"_"Electroweak fine-tuning measure"_"time stamp". 

The files that are contained include:

• spheno_in.dat, spheno_out.dat, feynhiggs14.dat, slhafile.dat, slhafileGUT.dat, susyhit.dat: in and outputs of the spectrum generators that were used. The slhafile.dat is obtained from softsusy with inputs defined at the SUSY scale, fed to FeynHiggs (produces the feynhiggs14.dat file) and then fed to SUSYHIT to produce susyhit.dat. The slhafileGUT.dat is the same spectrum but the input parameters are run to the GUT scale (defined by the scale where the unification of the coupling constants happens).The susyhit.dat file is used as input for prospino, micromegas, SUSY-AI, the fine-tuning calculation, superiso, gm2calc and ddcalc. The spheno files are used to cross-check our spectra, but not used in the results of the paper;

• DDcalcv2.out: output of the DDcalc program;

• Micromegas5_2_1.out, micro.out: micromegas output (version 5.2.1 and version 5.0.8);

• Prospino.dat: output containing the cross sections for chi1pm chi1pm, chi1pm, neu2, and slepton slepton production;

• SUSY_AI.dat: output from SUSY-AI;

• ft_contri.dat: electro-weak fine-tuning calculation, contains the number and the source of the dominant contribution;

• gm2_out.dat: output of GM2Calc;

• output_superiso, output_superiso_true: command-line output (output_superiso_true) and the slha-file (output_superiso).

The data used in our plots is stored in a CSV file (datagm2_right_omegah2_only.csv). This contains all the files that have the right omegah^2. 

This contains:

• dir_name: name of saving directory;
• bsmumu_spheno,btaunu_spheno,bsgamma_spheno,gm2_spheno: calculations done by Spheno of Br(b_s -> mu+ mu-), Br(b->tau nu), Br(b->s \gamma), g-2_mu;
• flag_prospino.dat_valid,flag_gm2_out.dat_valid,flag_ft_contri.out_valid,flag_DDcalcv2.out_valid,flag_susyhit.dat_valid,flag_spheno_out.dat_valid,flag_micromegas5_2_1.out_valid,flag_output_superiso_true_valid,flag_SUSY_AI.dat_valid: flags to check whether the files were present in the output;
• flag_LSP: flag to check whether the LSP is the neutralino;
• sigmachan_5,sigmaSIn_5,sigmaSIp_5,sigmaSDn_5,sigmaSDp_5,sigmav_5,omegachan_5,sigmacontri_5,omegacontri_5,omegah_mic5,omega_chan_label,sigma_chan_label: micromegas 5.2.1 output of the dominant annihilation channel for sigmav, sigmaSIn, sigmaSIp, sigmaSDn, sigmaSDp, sigmav, dominant annihilation channel for omegah^2, contribution of the dominant annihilation channel for sigmav, contribution of the dominant annihilation channel for omegah^2, omegah^2, label for omegah dominant annihilation channel (used for plotting), label for sigmav dominant annihilation channel (used for plotting);
• pval_DarkSide,pval_XENON,pval_PICO,pval_CRESST: p-values for DarkSide, XENON, PICO, CRESST;
• gm2_mic5,dmunu_mic5,bsgnlo_mic5,dtaunu_mic5,bsmumu_mic5,btaunu_mic5: output of micromegas 5.2.1 for g-2, D->munu, b->s gamma, D->tau nu, B_s -> mu mu, B->tau nu;
• zdec_neutralinos_5: output of micromegas 5.2.1 for branching fraction of the invisible decay of the Z boson to neutralinos;
• dtaunu_iso,bsmumu_iso,btaunu_iso,bsmumuuntag_iso,bsgamma_iso,dmunu_iso,gm2_iso: the low-energy observables as calculated by SuperIso;
• susyaistopexcl,susyai8pval,susyaistoppval,susyaiewexcl,susyai13excl,susyaiewpval,susyai8excl,susyai13pval: p-values for the SUSY-AI exclusions;
• n12,n13,n11,n23,n14,n24,n31,n32,n21,n34,n22,n33,n41,n43,u11,u12,v22,v21,u21,v12,u22,n44,n42,v11: neutralino (n) and chargino (u,v) components of the mixing matrices;
• alpha_higgs: higgs mixing angle;
• mgluino,md2,mu1,md1,mu2,mc2,mc1,msneutrinotau,mH,mstop2,msbottom2,msbottom1,mstop1,mslepton1,mHpm,mDM,mn2,mn3,mn4,mstau1,mstau2,,msneutrinoe,mA0,mslepton2: masses of the pMSSM spectrum;
• MeL,M2,AB,M1,M3,MeR,Mq3L,MuR,MuL,SUSYSCALE,AT,MdR,ATAU,MbR,Ml3R,MA,MtR,tanb,mu,Ml3L: input parameters of the pMSSM spectrum;
• mhiggsFeyn: mass of the SM-like higgs boson as computed by FeynHiggs;
• FTEW: value for electro-weak fine-tuning;
• PandaX (2017),DarkSide 50,omegah_ddcalc,XENON1T (2018),DarkSide 20k,DARWIN,LZ,PICO-500,PICO-60 (2017): p-value outputs of DDcalc;
• gm2calc,gm2calc_unc: GM2Calc calculation for g-2 and the uncertainty;
• xsec_lRlR,xsec_c1pn2,xsec_lLlL,xsec_c1c1,xsec_c1mn2,xsec_stau1stau1: cross sections for slepton_R sleptonR, slepton_L, slepton_L, chi1pm chi1mp, chi1pm neu2, stau_1 stau_1;
• excl: number to determine whether the channel is excluded and for what reason (> 0.5 = excluded, < 0.5 = not excluded, 0.4 = sensitive to PICO-500, 0.26 = sensitive to LZ, 0.13 = sensitive to Darwin, 0.0 = not sensitive to any proposed DMDD future experiment).