HBRP Publication
Published June 22, 2020 | Version v1
Journal article Open

Study of TIG Welding Process with Different Type of Technique: A Review

Creators

  • 1. PG scholars Department of Automobile Engineering, Rustamji Institute of Technology, BSF Academy, Tekanpur, Gwalior (M.P.), India
  • 2. Head of Department of Automobile Engineering, Rustamji Institute of Technology, BSF Academy, Tekanpur, Gwalior (M. P.), India

Description

Tungsten inert gas welding (TIG) is joining process of two metals. This process is running from last 25years because of its benefits like less heat required, minimum arc, efficient production, low thermal effected area and atmosphere friendly. Tungsten inert gas welding is done to join different sorts of ferrous metals and non-ferrous metals which can't be welded by non-conventional welding process. Different welding methods were used while joining of metal and readings like current, voltage, wire feed rate, speed, nozzle distance, torch angle and gas flow rate. Results the different strategies were utilized in enhancement of welding readings, for example, regression methods, taguchi strategy and statistical procedure in this paper we investigation of all angles relative in progress for welding quality and strength.

 

Files

Study of TIG Welding Process -HBRP Publication (1).pdf

Files (317.2 kB)

Additional details

References

  • Ghosh, N., Pal, P. K., Nandi, G., & Rudrapati, R. (2018). Parametric optimization of gas metal arc welding process by PCA based Taguchi method on austenitic stainless steel AISI 316L. Materials Today: Proceedings, 5(1), 1620-1625
  • Chavan. A, et al. (2018). A review on parametric optimization of MIG welding parameters by using various optimization techniques. International journal of engineering technology, management and applied sciences, 3(10), ISSN 2349-4476
  • Chauhan, V., & Jadoun, R. S. (2014). Parametric optimization of MIG welding for stainless steel (SS-304) and low carbon steel using Taguchi design method. Int J Adv Technol Eng Res (IJATER), 2(1), 224-229
  • Ganjigatti, J. P., Pratihar, D. K., & Choudhury, A. R. (2007). Global versus cluster-wise regression analyses for prediction of bead
  • Zhang, H., & Liu, J. (2011). Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process. Materials Science and Engineering: A, 528(19-20), 6179-6185
  • Kolahan, F., & Heidari, M. (2010). A new approach for predicting and optimizing weld bead geometry in GMAW. International Journal of Mechanical Systems science and engineering, 2(2), 138-142
  • Ambekar, S. D., & Wadhokar, S. R. (2015). Parametric optimization of gas metal arc welding process by using Taguchi method on stainless steel AISI 410. International Journal of Research in Modern Engineering and Emerging Technology, 3(1), 1-9
  • Mishra, B., et al. (2014). Metal inert gas welding parameters optimization. International Journal of Multidisciplinary and Current Research, 2, ISSN 2321-3124
  • Sonasale, P. (2015). An approach to optimize MIG welding parameters by using Design of Experiments. Adv. Materials Manufacturing & geometry in MIG welding process. Journal of materials processing technology, 189(1-3), 352-366.
  • 10. Kumar, G., et al. Optimization of MIG Welding process Parameters for Weld penetration in AISI Grade 304 Steel Using Taguchi Design Method. International Journal on Emerging Technologies, ISSN No. (Print): 0975-8364.

Subjects

Mechanical Engineering
http://www.hbrppublication.com/journals.html