Superstructure Aerodynamics of the Type 26 Global Combat Ship
Creators
- 1. School of Engineering, University of Liverpool, UK
Description
The Type 26 City class Global Combat Ship is the latest design of UK frigate. Construction of the first ship, HMS Glasgow, began in July 2017 and the expectation is that it will enter service in the mid-2020s as a replacement for the Royal Navy’s Type 23 Duke class frigates. The main contractor for the design and construction of the ship is BAE Systems Maritime – Naval Ships.
The Type 26 superstructure is characterised by its smooth sloping surfaces that are continuous along the ship from the fore deck to the flight deck. The tumblehome design reduces the ship’s radar cross-section, as does the minimisation of curved surfaces and internal corners. The Type 26 also has a bulky mast, also with flat sloping sides, while the funnel casing around the gas turbine exhaust uptake is located aft of the main mast and relatively low on the superstructure. In comparison, the earlier Type 23 has a much more fragmented superstructure with few geometric features for reduced radar reflection; it also has a more slender mast from which the anemometers are mounted, and the exhaust uptakes are higher. Overall the aerodynamics of the stealthy Type 26 frigate will be very different to the previous Type 23, and this will affect the operational envelope of the ship’s helicopters.
Recognising the importance of superstructure aerodynamics to the ship design, the University of Liverpool has been working closely with colleagues from BAE to ensure that the air flow over the ship was considered as the superstructure design evolved. The paper will describe how, within the design cycle, Computational Fluid Dynamics (CFD) has been used to analyse the unsteady flow over the full-scale ship. It will show how CFD, together with helicopter flight dynamics modelling, was used to inform design options for the superstructure geometry ahead of the landing deck. CFD was also used to inform options for locating the ship’s anemometers and has been used to predict the dispersion of the ship’s engine exhaust gases and the air temperature distribution in the vicinity of the flight deck.
Files
INEC 2018 Paper 047 Owen FINAL.pdf
Files
(2.8 MB)
Name | Size | Download all |
---|---|---|
md5:353878474b783d6b206d5de48fc9fc14
|
2.8 MB | Preview Download |
Additional details
References
- Civil Aviation Authority, 2000. Research On Offshore Helideck Environmental Issues. CAA Paper 99004, London.
- Civil Aviation Authority, 2013. CAP 437: Standards for Offshore Helicopter Landing Areas, London.
- Forrest, J., Owen, I., 2010. An investigation of ship airwakes using Detached-Eddy Simulation. In: Computers and Fluids, 39(4), pp. 656-673.
- Haller, G., 2005. An objective definition of a vortex. In: J. Fluid Mechanics, Vol. 525, pp. 1-26.
- Hodge, S.J., Forrest, J.S., Padfield, G.D., Owen, I. 2012. Simulating the Environment at the HelicopterShip Dynamic Interface: Research, development and Application. In: Aeronautical J., 116 (1185), 2012, 1155-1184.
- Kääriä, C.H., Forrest, J.S., Owen, I. 2013. The Virtual AirDyn: a simulation technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. In: Aeronautical J., 117 (1198), 1233-1248.
- Lumsden, B., Padfield, G.D. 1998. Challenges at the Helicopter-Ship Dynamic Interface. In Proceedings Military Aerospace Technologies – Fitec '98, IMechE Conference Transactions, Institution of Mechanical Engineers, Wiley, UK.
- Mateer, R., Scott, P., White, M., Owen, I., 2015. The Aerodynamics of a Bulky Main Mast. In Proceedings of American Society of Naval Engineers Annual Launch and Recovery Symposium, Baltimore, USA.
- Ministry of Defence, 2015. Defence Standard 00-133, Requirements and Guidance for the Aviation Arrangements in Surface Ships: Part 2 - Guidance for the Design and Construction of Aviation Requirements, UK Ministry of Defence.
- Roscoe, M.F., Wilkinson, C.H. 2002. DIMSS – JSHIP's Modeling and Simulation Process for Ship Helicopter Testing and Training. In: AIAA Modeling and Simulation Technologies Conference and Exhibition, AIAA 2002-4432, , Monterey, CA.
- Scott, P., White, M., Owen, I., 2015. Unsteady CFD Modelling of Ship Engine Exhausts and Over-Deck Air Temperatures and the Implications for Helicopter Operations. In: Proceedings 71st American Helicopter Society Annual Forum Virginia Beach, Virginia, USA.
- Turner, G., Clark, W., Cox, I., Finlay, B., Duncan, J. 2006. Project SAIF – assessment of ship helicopter operating limits using the Merlin helicopter simulator. In: AHS 62nd Annual Forum, Phoenix, AZ, 9-11 May.