Evaluation of the End Effect Impact on the Torsion Test for Determining the Shear Modulus of a Timber Beam through a Photogrammetry Approach
Creators
Description
The timber beam end effect in the torsion test is
evaluated using binocular stereo vision system. It is recommended by
BS EN 408:2010+A1:2012 to exclude a distance of two to three times
of cross-sectional thickness (b) from ends to avoid the end effect;
whereas, this study indicates that this distance is not sufficiently far
enough to remove this effect in slender cross-sections. The shear
modulus of six timber beams with different aspect ratios is determined
at the various angles and cross-sections. The result of this experiment
shows that the end affected span of each specimen varies depending
on their aspect ratios. It is concluded that by increasing the aspect
ratio this span will increase. However, by increasing the distance
from the ends to the values greater than 6b, the shear modulus trend
becomes constant and end effect will be negligible. Moreover, it is
concluded that end affected span is preferred to be depth-dependent
rather than thickness-dependant.
Files
10006764.pdf
Files
(170.9 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:938408b755a32a9b3f916bb4c7054ae0
|
170.9 kB | Preview Download |
Additional details
References
- A. P. Boresi and R. J. Schmidt, Advanced Mechanics of Materials. John Wiley and sons, 2003.
- BS EN 408:2010+A1:2012, "British Standard: Timber structures Structural timber and glued laminated timber Determination of some physical and mechanical properties," BSI Standards Publication, 2012.
- L. A. Soltis and D. R. Rammer, "Shear Strength of Unchecked Glued-Laminated Beams," Forest Product Journal, vol. 44, pp. 51–57, 1994.
- R. Gupta, L. R. Heck, and T. H. Miller, "Experimental Evaluation of the Torsion Test for Determining Shear Strength of Structural Lumber," Journal of Testing and Evaluation, vol. 30, no. 4, p. 283, 2002.
- A. M. Khokhar, H. Zhang, D. Ridley-Ellis, and J. Moore, "Determining the Shear Modulus of Sitka Spruce from Torsion Tests." in Proceedings of the 10th World Conference on Timber Engineering, 2008.
- R. Gupta and T. Siller, "Shear strength of structural composite lumber using torsion tests," vol. 33, no. 2, pp. 110–117, 2005.
- R. Gupta, L. R. Heck, and T. H. Miller, "Finite-Element Analysis of the Stress Distribution in a Torsion Test of Full-Size, Structural Lumber," Journal of Testing and Evaluation, vol. 30, no. 4, p. 291, 2002.
- Z. Peng and N. Guo-Qiang, "Simultaneous Perimeter Measurement for 3D Object with a Binocular Stereo Vision Measurement System," Optics and Lasers in Engineering, vol. 48, no. 4, pp. 505–511, 2010.
- Christian Wohler, 3D Computer Vision, Efficient Methods and Applications, 2nd ed. Springer, 2013. [10] BS EN 13183-1:2002, "British Standard: Moisture content of a piece of sawn timber. Determination by oven dry method," BSI Standards Publication, no. December, 2007. [11] Y. Li, P. Chen, M. Zhang, Y. Li, A´ . P. Chen, and M. Zhang, "The Vehicle Distance Measurement System Based on Binocular Stereo Vision," Lecture Notes in Electrical Engineering, vol. 378, 2016. [12] ASTM-D198, "Standard Test Methods of Static Tests of Lumber in Structural Sizes," ASTM International, pp. 1–27, 2014.