World Academy of Science, Engineering and Technology
Published July 3, 2015 | Version 10001977
Journal article Open

Development of Piezoelectric Gas Micro Pumps with the PDMS Check Valve Design

Authors/Creators

Description

This paper presents the design and fabrication of a novel piezoelectric actuator for a gas micro pump with check valve having the advantages of miniature size, light weight and low power consumption. The micro pump is designed to have eight major components, namely a stainless steel upper cover layer, a piezoelectric actuator, a stainless steel diaphragm, a PDMS chamber layer, two stainless steel channel layers with two valve seats, a PDMS check valve layer with two cantilever-type check valves and an acrylic substrate. A prototype of the gas micro pump, with a size of 52 mm × 50 mm × 5.0 mm, is fabricated by precise manufacturing. This device is designed to pump gases with the capability of performing the self-priming and bubble-tolerant work mode by maximizing the stroke volume of the membrane as well as the compression ratio via minimization of the dead volume of the micro pump chamber and channel. By experiment apparatus setup, we can get the real-time values of the flow rate of micro pump and the displacement of the piezoelectric actuator, simultaneously. The gas micro pump obtained higher output performance under the sinusoidal waveform of 250 Vpp. The micro pump achieved the maximum pumping rates of 1185 ml/min and back pressure of 7.14 kPa at the corresponding frequency of 120 and 50 Hz.

Files

10001977.pdf

Files (649.1 kB)

Name Size Download all
md5:e2ff9cf37651d344e93d85ad56f2440b
649.1 kB Preview Download

Additional details

References

  • H Kim, W H Steinecker, G R Lambertus, A A Astle, K Najafi, E T Zellers, L Bernal, P Washabaugh, K D Wise, "Integrated high-pressure 4-stage micro pump for high speed micro chromatography," Proc. 10th Int. Conf. Miniaturized Systems for Chemistry and Life Science (uTAS '06), Tokyo, Japan, pp. 1037–1039, 2006.
  • P Rodgers, V Eveloy, M Pecht, "Extending the limits of aircooling in microelectronic equipment," Proc. 6th Int. Conf. Thermal, Mechanical and Multiphysics Simulation and Experiment in Micro-electronics and Micro-systems, EuroSimE, Berlin, Germany, pp. 695–701, 2005.
  • Y Wang, G Yuan, Y K Yoon, M G Allen, S A Bidstrup, "Large eddy simulation (LES) for synthetic jet thermal management," Int. J. Heat Mass Transfer, Vol. 49, pp. 2173–2179, 2006.
  • L Arana, S Schaevitz, A Franz, M A Schmidt, K F Jensen, "A microfabricated suspended-tube chemical reactor for thermally efficient fuel processing," J. Microelectromech. Syst. Vol. 12, pp. 600–612, 2003.
  • N T Nguyen, X Huang and T K Chuan, "MEMS-micro pumps: a review," ASME J. Fluids Eng. Vol. 124, pp. 384-392, 2002.
  • D J Laser and J G Santiago, "A review of micro pumps," J. Micromech. Microeng. Vol. 14, pp. R35–R64, 2004.
  • P Woias, "Micro pumps-past, progress and future prospects," Sensors Actuators B Vol. 105, pp. 28–38, 2005.
  • H Kim, K Najafi, L P Bernal, "Gas micro pumps, " in: Y. Gianchandani, O. Tabata, H. Zappe (Eds.), Comprehensive Microsystems, vol. 2, Elsevier Ltd., The Netherlands, pp. 273-299, 2008.
  • L Chen, S Lee, J Choo and E K Lee, "Continuous dynamic flow micro pumps for microfluid manipulation," J. Micromech. Microeng. Vol. 18, pp. 1–22, 2008. [10] F Amirouche, Y Zhou and T Johnson, "Current micro pump technologies and their biomedical applications," Microsyst. Technol. Vol. 15 pp. 647-666, 2009. [11] H Andersson, W van der Wijngaart, P Nilsson, P Enoksson and G Stemme, "A valve-less diffuser micro pump for microfluidic analytical systems," Sensors Actuators B Vol. 72, pp. 259–265, 2001. [12] B Fan, G Song and F Hussain, "Simulation of a piezoelectrically actuated valveless micro pump," Smart Mater. Struct. Vol. 14, pp. 400–405, 2005. [13] J Kang, J V Mantese and G W Auner, "A self-priming, high performance, check valve diaphragm micro pump made from SOI wafers," J. Micromech. Microeng. Vol. 18, pp. 1-8, 2009. [14] R. Rapp, W K Schomburg, D. Maas, J. Schulz and W. Stark, "LIGA micro pump for gases and liquids," Sens. Actuators A Vol. 40, pp. 57–61, 1994. [15] S Boehm, W Olthuis and P Bergveld, "A plastic micro pump constructed with conventional techniques and materials," Sensors Actuators A Vol. 77, pp. 223–228, 1999. [16] S. Santra, P. Holloway, D. Batich, "Fabrication and testing of a magnetically actuated micro pump," Sens. Actuators B Vol. 87, pp. 358– 364, 2002. [17] T Q Truong and N T Nguyen, "A polymeric piezoelectric micro pump based on lamination technology," J. Micromech. Microeng. Vol. 14, pp.632–638, 2004. [18] J H Kim, K T Lau, R Shepherd, Y Wu, G Wallace and D Diamond, "Performance characteristics of a polypyrrole modified polydimethylsiloxane (PDMS) membrane based microfluidic pump," Sensors and Actuators A Vol. 148, pp. 239–244, 2008.