Published November 2, 2014
| Version 10000014
Journal article
Open
The Interaction between Hydrogen and Surface Stress in Stainless Steel
Creators
Description
This paper reveals the interaction between hydrogen
and surface stress in austenitic stainless steel by X-ray diffraction
stress measurement and thermal desorption analysis before and after
being charged with hydrogen. The surface residual stress was varied
by surface finishing using several disc polishing agents. The obtained
results show that the residual stress near surface had a significant
effect on hydrogen absorption behavior, that is, tensile residual stress
promoted the hydrogen absorption and compressive one did opposite.
Also, hydrogen induced equi-biaxial stress and this stress has a linear
correlation with hydrogen content.
Files
10000014.pdf
Files
(350.4 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:966eb1d4d546e78ed27a5eee2ddae1e2
|
350.4 kB | Preview Download |
Additional details
References
- Y. Murakami, T. Kanezaki, Y. Mine and S. Matsuoka, "Hydrogen Embrittlement Mechanism in Fatigue of Austenitic Stainless Steels," Metall. Mater. Trans. A, vol. 39, no. 6, pp. 1327–1339, 2008.
- W.H. Johnson, "On some remarkable changes produced in iron and steel by the action of hydrogen and acids," Proc. Royal Society of London, vol. 23, pp. 168–179, 1874.
- A.T. Yokobori, Jr., T. Nemoto, K. Satoh and T. Yamada, "Numerical analysis on hydrogen diffusion and concentration in solid with emission around the crack tip," Eng. Fract. Mech., vol. 55, no. 1, pp. 47–60, 2002.
- O. Takakuwa and H. Soyama, "Suppression of hydrogen-assisted fatigue crack growth in austenitic stainless steel by cavitation peening," Int. J. Hydrogen Energy, vol. 37, no. 6, pp. 5268–5276, 2012.
- O. Takakuwa, M. Nishikawa and H. Soyama, "Numerical simulation of the effects of residual stress on the concentration of hydrogen around a crack tip," Surf. Coat. Technol., vol. 206, no. 11–12, pp. 2892–2898, 2012.
- A. Barnoush and H. Vehoff, "Recent developments in the study of hydrogen embrittlement: Hydrogen effect on dislocation nucleation," Acta Mater., vol. 58, no. 16, pp. 5274–5285, 2010.
- O. Takakuwa and H. Soyama, "Using an indentation test to evaluate the effect of cavitation peening on the invasion of the surface of austenitic stainless steel by hydrogen," Surf. Coat. Technol., vol. 206, no. 18, pp. 3747–3750, 2012.
- O. Takakuwa, Y. Mano and H. Soyama, "Effect of indentation load on Vickers hardness of austenitic stainless steel after hydrogen charging," Proc. ASME Pressure Vessel & Piping Conf., pp. 28280–1–6, 2014.
- O. Takakuwa, Y. Mano and H. Soyama, "Increase in the local yield stress near surface of austenitic stainless steel due to invasion by hydrogen," Int. J. Hydrogen Energy, vol. 39, no. 11, pp. 6095–6103, 2014. [10] O. Takakuwa, Y. Mano and H. Soyama, "(24) Effect of hydrogen on the micro- and macro-strain near the surface of austenitic stainless steel," Adv. Mater. Research, vol. 936, pp. 1298–1302, 2014. [11] O. Takakuwa and H. Soyama, "Optimizing the conditions for residual stress measurement using a two-dimensional XRD method with specimen oscillation," Adv. Mater. Phys. Chem., vol. 3, no. 1A, pp. 8–18, 2013.