Performances Assessment of Direct Torque Controlled IM Drives Using Fuzzy Logic Control and Space Vector Modulation Strategy
Creators
Description
This paper deals with the direct torque control (DTC) of the induction motor. This type of control allows decoupling control between the flux and the torque without the need for a transformation of coordinates. However, as with other hysteresis-based systems, the classical DTC scheme represents a high ripple, in both the electromagnetic torque and the stator flux and a distortion in the stator current. As well, it suffers from variable switching frequency. To solve these problems various modifications, in conventional DTC scheme, have been made during the last decade. Indeed the DTC based on space vector modulation (SVM) has proved to generate very low ripples in torque and flux with constant switching frequency. It also shows almost the same dynamic performances as the classical DTC system. On the other hand, fuzzy logic is considered as an interesting alternative approach for its advantages: Analysis close to the exigencies of user, ability of nonlinear systems control, best dynamic performances and inherent quality of robustness.
Therefore, two fuzzy direct torque control approaches, for the induction motor fed by SVM-voltage source inverter, are proposed in this paper. By using these two approaches of DTC, the advantages of fuzzy logic control, space vector modulation, and direct torque control method are combined. The performances of these DTC schemes are evaluated through digital simulation using Matlab/Simulink platform and fuzzy logic tools. Simulation results illustrate the effectiveness and the superiority of the proposed Fuzzy DTC-SVM schemes in comparison to the classical DTC.
Files
9998111.pdf
Files
(895.1 kB)
Name | Size | Download all |
---|---|---|
md5:506250885177a50e0c9efb69c8dce28e
|
895.1 kB | Preview Download |
Additional details
References
- Z. Zhang, R. Tang, B. Bai and D. Xie, "Novel direct torque control based on space vector modulation with adaptive stator flux observer for induction motors," IEEE Trans. on Magnetics, Vol. 46, No. 8, pp. 31333136, Aug. 2010.
- L. Moussaoui, and A. Moussi, "Performances improvement and torque ripple mitigation for CSI-Fed vector controlled induction motor based on space vector PWM control," Electrical Engineering J., JEE, ISSN: 1582-4594, Vol. 5, No.1, pp. 512, 2005.
- Y.S. Kishore Babu, and G.T. Ram Das, "Simulation as an effective tool for the comparative evaluation of field oriented control and direct torque control of induction motor," Int. J. of Electrical, Electronic Science and Engineering, World Academy of Science, Engineering and Technology, Vol.7, No.1, pp-5662, 2013.
- W. Jing-Xin and J. Jian-Guo, "Combining the principles of variable structure, direct torque control, and space vector modulation for induction motor fed by matrix converter," Bulletin of the Polish Academy of Sciences Technical Sciences, Vol. 58, No. 4, 2010, pp. 657663.
- R. Toufouti, S. Meziane and H. Benalla, "New direct torque neuro-fuzzy control based SVM for dual two level inverter-fed induction motor," Control Engineering and Applied Informatics, CEAI, Vol. 11, No. 2, 2009, pp. 313.
- J. N. Bharothu and V. Gopilatha, "Optimal vector sequence with space vector modulation in direct torque control of induction motor," American J. of Sustainable Cities and Society, ISSN 2319-7277, Issue 2, Vol. 1, pp. 6478, Jan. 2013.
- J. G. Chaudhari, S. K. Mude and P. G. Gabhane, "High performance direct torque control of induction motor using space vector modulation," IEEE CCECE/CCGEI, Ottawa, pp. 1090-1093, May. 2006.
- L. Moussaoui and A. Moussi, "An open loop space vector PWM control for CSI-fed field-oriented induction motor drive with improved performances and reduced pulsating torque,"WSEAS Trans.-Circuits and Systems, Issue 2, Vol. 4, ISSN: 1109-2734, pp. 71-77, Feb. 2005.
- Y. Zhang, Z. Jhao, T. Lu, and L. Yuan, " Sensorless three-level inverter fed induction motor drive based on indirect torque control," in Proc. IEEE, 6thInt. Power Electronics and Motion Control Conf., IPEMC' 09, 2009, pp. 589-593,. [10] C. Hari Krishna, J. Amarnath, and S. Kamakshiah, "A simplified SVPWM algorithm for multi-level inverter fed DTC of induction motor drive," Int. J. of Engineering and Innovative Technology, IJEIT, Vol. 1, Issue 4, pp. 61-67, April. 2012. [11] L. Moussaoui, "Direct torque control for an three-level NPC voltage source inverter fed induction motor drive," Int. Conf. on Electrical Engineering and automatic Control, ICEEAC'2013, Setif-Algeria, 24-26 Nov. 2013. [12] B. Metidji, F. Tazrart, A. Azib, N. Taib, and T. Rekioua, "A new fuzzy direct torque control strategy for induction machine based on indirect matrix converter," Int. J. of Research and Reviews in Computing Engineering, Vol. 1, no. 1, pp-18-22, March. 2011. [13] A. F. Aimer, A. Bendiabdellah, A. Miloudi and C. Mokhtar, "Application of fuzzy logic for a ripple reduction strategy in DTC scheme of a PWM inverter fed induction motor drives," J. of Electrical Systems Special, Issue 01, pp. 13-17, Nov. 2009. [14] A. Idir and M. Kidouche, "Direct torque control of three phase induction motor drive using fuzzy logic controllers for low torque ripple," Int. Conf. on Control, Engineering & Information Technology, CEIT'13, Vol.2, 2013, pp.78-83. [15] S. Raojalluri and B .V.Sanker Ram, "Direct torque control method using fuzzy logic for IM drives," Int. J. of Advanced Research in Electrical, Electronics and Instrumentation Engineering, IJAREEIE, Vol. 1, Issue.4, pp. 275-281, Oct. 2012. [16] J. H. Pujar and S. F. Kodad, "Fuzzy speed regulator for induction motor direct torque control scheme," Int. J. on Electrical and Power Engineering, ACEEE, Vol. 01, No. 03, pp.1-6, Dec. 2010. [17] Y. S. Kishore Babuand G. T. Ram Das,"Improvement in direct torque control of induction motor using fuzzy logic duty ratio controller," J.of Engineering and Applied Sciences, ARPN, Vol. 5, No. 4, pp. 68-74, April. 2010. [18] S. R. Karpe and V. P. Dhote, "Fuzzy logic based direct torque control of induction motor," Int. J. of Engineering Science & Advanced Technology, IJESAT, Vol. 2, Issue-4, pp. 912-917, Jul-Aug. 2012