The Use of Seashell by-Products in Pervious Concrete Pavers
Description
Pervious concrete is a green alternative to conventional pavements with minimal fine aggregate and a high void content. Pervious concrete allows water to infiltrate through the pavement, thereby reducing the runoff and the requirement for stormwater management systems.
Seashell By-Products (SBP) are produced in an important quantity in France and are considered as waste. This work investigated to use SBP in pervious concrete and produce an even more environmentally friendly product, Pervious Concrete Pavers.
The research methodology involved substituting the coarse aggregate in the previous concrete mix design with 20%, 40% and 60% SBP. The testing showed that pervious concrete containing less than 40% SBP had strengths, permeability and void content which are comparable to the pervious concrete containing with only natural aggregate. The samples that contained 40% SBP or higher had a significant loss in strength and an increase in permeability and a void content from the control mix pervious concrete. On the basis of the results in this research, it was found that the natural aggregate can be substituted by SBP without affecting the delicate balance of a pervious concrete mix. Additional, it is recommended that the optimum replacement percentage for SBP in pervious concrete is 40 % direct replacement of natural coarse aggregate while maintaining the structural performance and drainage capabilities of the pervious concrete.
Files
17337.pdf
Files
(335.9 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:d28775bf0cb6091ad0cfe1f29e081362
|
335.9 kB | Preview Download |
Additional details
References
- <p>
- ACI 522R-10, Report on Pervious Concrete. American Concrete Institute, Farmington Hills, Michigan, 2010, 38p.
- Tennis P.D, Leming M.L, Akers D.J., Pervious concrete pavements. Technical report, EB302.02. Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, Maryland; 2004, 32p.
- Jing Yang J., Jiang G., Experimental study on properties of pervious concrete pavement materials, Cement and Concrete Research, Vol.33, 2003, pages 381–386.
- Montes F, Haselbach, L.H., Measuring Hydraulic Conductivity in Pervious Concrete. Environmental Engineering Science, Vol. 23, 2006, pages 960-969.
- National Union of Industry Careers and Building Materials. http://www.unicem.fr, Accessed: 19th December 2011.
- Halm, H. J. 1980. "Concrete Recycling." Transportation Research News, Vol. 89. Transportation Research Board. Washington, D.C. pp. 6-10.
- France Agri Mer. Les filières pêche et aquaculture en France, Edition 2011, 2011, 36p.
- Nguyen, D.H, Boutouil M., Sebaibi N., Leleyter L., Baraud F., valorization of seashell by-products in pervious concrete pavers, Paper recently accepted for publication in Construction and Building Materials.
- NF EN12390-3. Testing hardened concrete — Part 3: Compressive strength of test specimens, 2003, 18p. [10] NF EN1338. Concrete paving blocks - Requirements and test methods, 2010, 68p. [11] AFGC-AFREM. Proceedings of technical meeting AFPC–AFREM, Toulouse, France; 1997, 238p. [12] Das BM. Principles of Geotechnical Engineering, 7th edition, Publisher: Wadsworth, Inc, 2010, 683p. [13] Schaefer VR, Wang K, Suleiman MT, Kevern J. Mix design development for pervious concrete in cold climates. Technical report. National Concrete Pavement Technology Center, Iowa State Univ., Ames, Iowa; 2006. [14] NF EN 1097-2. Tests for mechanical and physical properties of aggregates. Part 2: Methods for the determination of resistance to fragmentation, 2010, 38p. [15] NF EN 933-3. Tests for geometrical properties of aggregates. Part 3: Determination of particle shape - Flakiness index, 2012, 15p. [16] PTV122. Technical specifications for permeable concrete paving blocks and slabs, 2nd edition; 2005. [17] Florida Department of Transportation, "Florida method of test fo measurement of water permeability of compacted asphalt pacing mixtures," Designation FM 5-565, 2012. [18] Antonin Fabbri A., Physics and mechanics of cementitious media submitted to frost action, Ph.D. Thesis, University of Marne-La-Vallée, 2006, 282p. [19] Sutter, L., Karl Peterson, L.,Gustavo Julio-Betancourt, G.J., Doug Hooton, D, Van Dam, T., Smith, K., 2008, The Deleterious Chemical Effects of Concentrated Deicing Solutions on Portland Cement Concrete, Michigan Tech Transportation Institute, 65p.</p> <p> </p>