Expert Notes
Published September 2, 2024 | Version 1
Book chapter Open

Study of Mechanical Properties of Granular Blast Furnace Slag Concrete

Creators

  • 1. K.C. College of Engineering and Technology, Nawanshahr, Punjab, India
  • 2. Department of Civil Engineering, Punjab Agricultural University, Ludhiana, Punjab, India
  • 3. Department of Civil Engineering, Maharishi Markandeshwar (Deemed to be University), Mullana, Haryana, India

Description

Abstract: From the previous findings, the coarse furnace slag (GBFS) has more weight than typical mixture and it has more friction tarmac mixtures, provide more constancy &more angle of IF. Therefore, Granulated furnace scoria, rather than being disposed-off on valuable land, is usually recommended to be used as an inexpensive construction material in quality construction. This study has been distributed to get results of addition of GBFS in concrete and study the mechanical properties. As raw materials, results have shown that coarse furnace scoria concrete has higher strength as compared to traditional concrete that are utilized in this study. From the economic purpose of read, utilization of GBFS scoria as construction mixture could scale back the value of extracting and process present aggregates. The Scoria manufacturing business can also scale back their price of treating and disposing the massive variety of scoria stockpiles.

Keywords: Granular blast furnace slag, Natural sand, Compressive strength, Flexural strength, Split tensile strength

Files

33.pdf

Files (297.4 kB)

Name Size Download all
md5:7679f58390de755ec6fa8df06dfec192
297.4 kB Preview Download

Additional details

Identifiers

DOI
10.5281/zenodo.13788761

Dates

Accepted
2024-08-01
Accepted
Available
2024-09-02
Published

References

  • 1. Adak, D., Sarkar, M., & Mandal, S. (2014). Effect of nano-silica on strength and durability of fly ash based geopolymer mortar. Construction and Building Materials, 70, 453-459.
  • 2. Aggarwal, P., Siddique, R., Aggarwal, Y., & Gupta, S. M. (2008). Self-compacting concrete-procedure for mix design. Leonardo Electronic Journal of Practices and Technologies, 12, 15-24.
  • 3. Clark, B. A., & Brown, P. W. (2000). The formation of calcium sulfoaluminate hydrate compounds: Part II. Cement and Concrete Research, 30(2), 233-240.
  • 4. Compendex, S., & Elsevier, G. (2016). Influence of zinc oxide nanoparticle on strength and durability of cement mortar. International Journal of Earth Science and Engineering, 9, 175-181.
  • 5. Ghafari, E., Ghahari, S. A., Feng, Y., Severgnini, F., & Lu, N. (2016). Effect of Zinc oxide and Al-Zinc oxide nanoparticles on the rheological properties of cement paste. Composites Part B: Engineering, 105, 160-166.
  • 6. Heikal, M., Abd El Aleem, S., & Morsi, W. M. (2013). Characteristics of blended cements containing nano-silica. HBRC Journal, 9(3), 243-255.
  • 7. Hou, P., Kawashima, S., Kong, D., Corr, D. J., Qian, J., & Shah, S. P. (2013). Modification effects of colloidal nanoSiO2 on cement hydration and its gel property. Composites Part B: Engineering, 45(1), 440-448.
  • 8. Khatib, J. M., Siddique, R., Halliday, C., & Khatib, S. (2014). Lime activated fly ash paste in the presence of metakaolin. Procedia Engineering, 95, 415-418.
  • 9. Kontoleontos, F., Tsakiridis, P. E., Marinos, A., Kaloidas, V., & Katsioti, M. (2012). Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization. Construction and Building Materials, 35, 347-360.
  • 10. Lee, Y., Lim, S., & Lee, H. (2020). Chloride resistance of portland cement-based mortar incorporating high aluminate cement and calcium carbonate. Materials, 13(2), 359.
  • 11. Li, Y., & Kwan, A. K. H. (2014). Ternary blending of cement with fly ash microsphere and condensed silica fume to improve the performance of mortar. Cement and Concrete Composites, 49, 26-35.
  • 12. Matar, P., & Assaad, J. J. (2019). Concurrent effects of recycled aggregates and polypropylene fibers on workability and key strength properties of self-consolidating concrete. Construction and Building Materials, 199, 492-500.
  • 13. Qing, Y., Zenan, Z., Deyu, K., & Rongshen, C. (2007). Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume. Construction and Building Materials, 21(3), 539-545.
  • 14. Radlinski, M., & Olek, J. (2012). Investigation into the synergistic effects in ternary cementitious systems containing portland cement, fly ash and silica fume. Cement and Concrete Composites, 34(4), 451-459.
  • 15. Rukzon, S., & Chindaprasirt, P. (2009). An experimental investigation of the carbonation of blended portland cement palm oil fuel ash mortar in an indoor environment. Indoor and Built Environment, 18(4), 313-318.
  • 16. Singh, L. P., Karade, S. R., Bhattacharyya, S. K., Yousuf, M. M., & Ahalawat, S. (2013). Beneficial role of nanosilica in cement based materials–A review. Construction and Building Materials, 47, 1069-1077.
  • 17. Vishwakarma, V., & Ramachandran, D. (2018). Green Concrete mix using solid waste and nanoparticles as alternatives-A review. Construction and Building Materials, 162, 96-103.
  • 18. Visser, J. H. (2012). Accelerated carbonation testing of mortar with supplementary cementing materials: limitation of the acceleration due to drying. Heron, 57(3), 231-246.
  • 19. Wongkeo, W., Thongsanitgarn, P., Chindaprasirt, P., & Chaipanich, A. (2013). Thermogravimetry of ternary cement blends: effect of different curing methods. Journal of Thermal Analysis and Calorimetry, 113, 1079-1090.
  • 20. Zhang, X., Ge, L., Zhang, Y., & Wang, J. (2019). Mechanical properties of carbon-fiber RPC and design method of carbon-fiber content under different curing systems. Materials, 12(22), 3759.