Thermoelectric properties achievable with CNTs and polymer/SWCNT composites

B. Krause^*, P. Pötschke

 ¹ Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Str. 6, 01069 Dresden, Germany

*Krause-beate@ipfdd.de

Electrically conductive polymer composites (CPCs) based on insulating polymers filled with carbon nanotubes (CNTs) are being studied as potential thermoelectric (TE) materials to recover waste heat into electrical energy. Even though such composites still have significantly lower thermoelectric performance than traditionally used materials and can only be used in temperature ranges below 240°C for long time, their advantages lie in their availability and cost efficiency, but also in ease of processing, flexibility, low density and intrinsically low thermal conductivity.

 In our study, composites based on industrially used polymers were fabricated by melt processing in small scale and compression molded to thin sheets. The singlewalled CNTs (SWCNTs) used as fillers created an electrically conductive network in this insulating thermoplastic matrix.

 A systematic overview of thermoelectric properties of CNT and polymer/SWCNT composites is given. The influence of the CNT type, the polymers and other additives on the TE behaviour is shown. 

In most cases, p-type SWCNTs are also used to fabricate p-type composites, whereas n-type composites are obtained when the polymers contain nitrogen groups, e.g. polyamides or acrylonitrile butadiene styrene (ABS) [1]. The p-type composites can be converted to n-type behavior by adding additives. For example, pre-treatment of SWCNTs with polyethylene glycol (PEG) [2, 3] or ionic liquids [4, 5] led to switching from p- to n-type [3-5]. 

References

[1] B. Krause et al. Journal of Composites Science 2019, 3, 106.

[2] B. Krause et al. Nanomaterials 2022, 12, 3812.

[3] J. Luo et al. Polymer 2017, 108, 513-520.

[4] O. Voigt et al. Journal of Composites Science 2022, 6, 25.

[5] B. Krause et al. ACS Applied Nano Materials 2023, 6, 13027.

This work has been receiving financial support from the European Union’s Horizon 2020 Research and Innovation Programme for project InComEss under Grant Agreement Number 862597.