Published July 28, 2023 | Version v1

Effect of Steel Slag and Calcium Carbide Waste on the Plasticity and Compaction Characteristics of Clay Soil

  • 1. Ph.D Student ,Department of Civil Engineering, University of Ilorin, Ilorin, Nigeria
  • 2. Professor, Department of Civil Engineering, University of Ilorin, Ilorin, Nigeria,
  • 3. Lecturer,Department of Civil Engineering, Olusegun Agagu University of Science and Technology, Okitipupa, Ondo State,Nigeria.

Description

The need to enhance the strength of clay soil which is known as a problematic soil to geotechnical engineers necessitates the use of stabilizing materials like industrial waste materials which are easily available at low/or no cost. The clay soil samples, Steel Slag (SS) and Calcium Carbide Waste (CCW) were subjected to X-Ray Fluorescence (XRF) test to determine their chemical compositions while the stabilized soil samples at varying percentages of SS (25%, 30%, 35%, and 40%) and CCW (75%, 70%, 65%, and 60%) for soil sample A and (45%, 50%, 55% and 60%) SS and (55%, 50%, 45% and 40%) CCW for soil sample B were subjected to Atterberg Limits and compaction tests. The soil samples A and B were classified as A-7-6(5) and A-6(5) according to American Association of State Highway Transportation Official (AASHTO), inorganic clay of high plasticity (CH) and inorganic clay of low to medium plasticity (CL) according to Unified Soil Classification System. The plasticity of the soil samples A and B decreases by 28% and 41% which reduces its swell potential and moisture-holding capacity. Also, the strength property revealed that the stabilized soil samples A and B increases the maximum dry density from 17.0kN/m3 and 13.0kN/m3 to 26.5kN/m3 and 23.5kN/m3 and decreases the optimum moisture content from 26.0% and 20.5% to 15.0% and 11.5% respectively which could be attributed to the lower affinity of SS to water thus, improving the compaction properties of the soil samples.

Files

EFFECT OF STEEL SLAG AND CALCIUM CARBIDE WA.pdf

Files (577.0 kB)

Name Size
md5:36e6e18807973636fa892157a1fd46cb
577.0 kB Preview Download

Additional details

References

  • 1. Abdalqadir, Z. K., Salih, N. B., & Salih, S. J. (2022). The improvement of the geotechnical properties of low-plasticity clay (CL) using steel slag in Sulaimani City/Iraq. Geomechanics and Geoengineering, 17(3), 834-841.
  • 2. Akinwumi, I. I., Adeyeri, J. B., & Ejohwomu, O. A. (2013). Effects of steel slag addition on the plasticity, strength, and permeability of lateritic soil. In ICSDEC 2012: Developing the Frontier of Sustainable Design, Engineering, and Construction (pp. 457-464).
  • 3. Akinyemi, B. A., Orogbade, B. O., & Okoro, C. W. (2021). The potential of calcium carbide waste and termite mound soil as materials in the production of unfired clay bricks. Journal of Cleaner Production, 279, 123693.
  • 4. British Standard 1377 (1990). British Standard Methods of Testing Soils for Civil Engineering Purposes. British Standard Institute, London.
  • 5. Chukwudebelu, J. A., Igwe, C. C., Taiwo, O. E., & Tojola, O. B. (2013). Recovery of pure slaked lime from carbide sludge: Case study of Lagos state, Nigeria. African Journal of Environmental Science and Technology, 7(6), 490-496..
  • 6. Dauda, A. M., Akinmusuru, J. O., Dauda, O. A., Durotoye, T. O., Ogundipe, K. E., & Oyesomi, K. O. (2018). Geotechnical properties of lateritic soil stabilized with periwinkle shells powder.
  • 7. Emesiobi, F. C. (2000). Testing and quality control of materials in civil and highway engineering. The BluePrint Limited, Port Harcourt, Nigeria.
  • 8. Federal Ministry of Works and Housing (FMWH) (1997). General Specification (Roads and Bridges). Revised Edition, Volume II, Abuja, Nigeria.
  • 9. Firoozi, A. A., Firoozi, A. A., & Baghini, M. S. (2016). A review of clayey soils. Asian Journal of Applied Sciences (ISSN: 2321–0893), 4(06)..
  • 10. Garber, N. J., & Hoel, L. A. (2019). Traffic and highway engineering. Cengage Learning.