Geophone data in the Rutor proglacial area (Valle d'Aosta, Italy)
Authors/Creators
- 1. Department of Environment, Land and Infrastructure Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy
- 2. Interuniversity Department of Regional and Urban Studies and Planning, Politecnico di Torino, Viale Pier Andrea Mattioli 39, 10125 Torino, Italy
- 3. Research Institute for Geo-Hydrological Protection, Consiglio Nazionale delle Ricerche, Padova, Italy
- 4. Department of Architecture and Design, Politecnico di Torino, 10125 Torino, Italy
- 5. Faculty of Science and Technology, Free University of Bozen-Bolzano, Bozen-Bolzano, Italy
Description
Geophone data (PASI S.r.l. 4.5 Hz, vertical) collected along the Rutor proglacial stream, Valle d'Aosta (N 45.667063, E 7.001157 WGS84). Geophones are installed at different distances from the channel (Geo1 at 3 m, Geo2 at 6 m, Geo3 at 8 m). Raw seismic data are recorded at a sampling rate of 200 Hz, with a Amplifier Gain = 16. Time synchronization is provided by a GPS. The dataset is composed of the timestamp in UTC (dd-mmm-yyyy HH:MM) and aggregated data computed as the mean of the absolute values of the raw data calculated on a 1-min time window (in counts). Raw data at 200 Hz are recorded with a DATA-CUBE³, a 3-channel, 24-bit seismic data recorder. The signal input range of the DATA-CUBE³ is ± 2.048V = 4.096Vpp. For 24-bit ADC this equals 0.000 000 244 140 625V per count at gain 1.
Notes
Files
dataRutor_2021.txt
Files
(14.6 MB)
| Name | Size | Download all |
|---|---|---|
|
md5:41901bb14a9293f0df4874e675db26e1
|
6.4 MB | Preview Download |
|
md5:9da7d6333b5d4dd0292400ee43b1b730
|
8.1 MB | Preview Download |