Published December 30, 2019
| Version v1
Journal article
Open
Forced Convection upon Heat Sink of AL-Cu for Design Optimization by Experimental and CFD Analysis for Cooling of ICs in CPU
Creators
- 1. Prof and Head mechanical engg,Research Scholar,JAIN,Bengaluru.
- 2. Prof at R&D,CMET,JAIN,Bengaluru,
- 3. Asst prof,E&C,KCT Engg college,kalaburagi&Research scholarVTU,Belagavi,Karnataka..
Contributors
- 1. Publisher
Description
A heat sink device is used with specific power input at 100V and 20W by the heater attached at the base plate of copper and then obtaining the average temperature of Heat sink by the help of 10 thermocouples .Two specimens of heat sinks were designed and were tested for mass flow rate and heat transfer coefficient. With base of 1.5mm&2.5mmtip thickness and another specimen with dimensions as tip0.5mm and1.00mmbase thickness are used By experimenting and CFD simulations, optimization of heat sink design was done. Then correlation and Validation foe both the specimen was done and were found satisfactory results.
Files
A9867109119.pdf
Files
(1.2 MB)
| Name | Size | Download all |
|---|---|---|
|
md5:587c3bea676ec92151b302a13dad3fda
|
1.2 MB | Preview Download |
Additional details
Related works
- Is cited by
- Journal article: 2249-8958 (ISSN)
Subjects
- ISSN
- 2249-8958
- Retrieval Number
- A9867109119/2019©BEIESP