Co-doping as a strategy for tailoring the electrolyte properties of BaCe0.9Y0.1O3–δ
Authors/Creators
- 1. Institute for Multidisciplinary Research University of Belgrade
- 2. BioSense Institute University of Novi Sad
Description
The properties of single-doped BaCe0.9Y0.1O3–δ and materials co-doped with 5 mol % of different cations (In3+,
Zr4+ and Nb5+) with the general formula BaCe0.85Y0.1M0.05O3–δ were compared to examine the influence of
dopants on the electrolyte properties. The samples were synthesized by the citric-nitric autocombustion method.
BaCe0.85Y0.1In0.05O3–δ was successfully sintered at 1400 °C for 5 h in air, while a complete sintering of the other
materials was carried out at 1550 °C. This makes the doping with In a preferable method since sintering temperatures
below 1500 °C can limit BaO evaporation. The total conductivities (σ) calculated from the electrical
measurements at 700 °C in wet hydrogen decreased in the following order:
BaCe0.9Y0.1O3–δ > BaCe0.85Y0.1Zr0.05O3–δ > BaCe0.85Y0.1Nb0.05O3–δ > BaCe0.85Y0.1In0.05O3–δ. The stability
of the ceramics exposed to a 100% CO2 atmosphere at 700 °C for 5 h was examined by X-ray analysis. It was
observed that only BaCe0.85Y0.1In0.05O3–δ could sustain the aggressive environment containing traces of secondary
phases, while the other samples were partially or significantly decomposed. By taking into account the
values of the Goldschmidt tolerance factor (t) and dopant electronegativity (χ), it was found that the dopant
electronegativity had a decisive role in inhibiting the carbonation of the ceramics.