Published August 31, 2019 | Version v1
Journal article Open

MODELING ANALYSIS OF THE EFFECT OF THE MAIN ROLL-HOOP LENGTH ON THE STRENGTH OF FORMULA STUDENT CHASSIS

Authors/Creators

  • 1. Lambung Mangkurat University
  • 2. Brawijaya University

Description

Chassis is a very important part of the vehicle, where the whole body of the vehicle is built. All vehicle external loads include their own weight supported by the chassis. Chassis design and analysis play an important role in making a vehicle. To find out the phenomenon of Formula Student Car, Autodesk Inventor simulation was made with variations in roll hoop length and static loading of 9, 6 and 5 kN. The chassis material is carbon steel which has a value of mechanical properties that meet regulatory standards. The results obtained in this study are the relationship between the main roll hoop length and normal stress and deflection is the same, the greater the value of the main roll hoop length, the greater the value of normal stress and deflection. The relationship between the main roll hoop length and normal stress is the greater the value of the main roll hoop length, the greater the normal stress value. While the relationship between the main roll hoop length and shear stress is the greater the value of the main roll hoop length, the lower the T-x shear stress value. The relationship between the main roll hoop length and normal stress and T-y shear stress is the same, namely the greater the value of the main roll hoop length, the higher the value of normal stress and shear stress T-y. The relationship between the main roll hoop length and normal stress is the greater the value of the main roll hoop length, the higher the normal stress and torsional value. Test results of normal stress, shear and torsional stress show that the chassis type B with a roll hoop height of 504 mm and the main roll hoop length of 125 mm meets the requirements.

Files

Modeling analysis of the effect of the main roll-hoop length on the strength of Formula Student chassis.pdf

Files (4.0 MB)

Additional details

References

  • Zolina, T. V., Sadchikov, P. N. (2012). Modeling of Structural Behaviour of An Industrial Building with Account for the Variation of Rigidity in the Course of its Operation. Designing and detailing of building systems. Mechanics in civil engineering, 10, 69–76.
  • Marzuki, M. A. B., Abu Bakar, M. A., Mohammed Azmi, M. F. (2015). Designing space frame race car chassis structure using natural frequencies data from ansys mode shape analysis. International Journal of Information Systems and Engineering, 3 (1), 54–63. doi: https://doi.org/10.24924/ijise/2015.11/v3.iss1/54.63
  • Nugroho, U., Anis, S., Kusumawardani, R., Khoiron, A. M., Maulana, S. S., Irvandi, M., Mashdiq, Z. P. (2018). Frame Analysis of UNNES Electric Bus Chassis Construction Using Finite Element Method. Engineering International Conference (EIC2017) AIP Conf. Proc., 1941, 020017-1–020017-4. doi: https://doi.org/10.1063/1.5028075
  • Taufik, A. Z., Rashid, N., lan, M., Faruq, M., Zahir, M. (2014). Electric car chassis design and analysis by using CATIA V5 R19. IOSR Journal of Mechanical and Civil Engineering, 11 (4), 56–69. doi: https://doi.org/10.9790/1684-11435669
  • Wang, H., Tan, K. H., Yang, B., Peng, J. (2017). 15.04: Parametric study on steel beams with fin-plate joints under falling floor impact. Ce/papers, 1 (2-3), 3910–3919. doi: https://doi.org/10.1002/cepa.447
  • Belingardi, G., Obradovic, J. (2010). Design of the Impact Attenuator for a Formula Student Racing Car: Numerical Simulation of the Impact Crash Test. Journal of the Serbian Society for Computational Mechanics, 4 (1), 52–65.
  • Jang, C., Quagliato, L., Murugesan, M., Kim, D., Lee, C., Kim, N. (2017). Material property of metal skin – sheet molding compound laminate structures for the production of lightweight vehicles body frame. Procedia Engineering, 207, 878–883. doi: https://doi.org/10.1016/j.proeng.2017.10.845
  • Shukla, S., Agnihotri, S., Sahoo, R. R. (2016). Design and Analysis of Formula SAE Chassis. Journal of Aeronautical and Automotive Engineering (JAAE), 3 (1), 26–32.
  • Ramesh kumar, S., Dhandapani, N. V., Parthiban, S., Kamalraj, D., Meganathan, S., Muthuraja, S. (2018). Design and Analysis of Automotive Chassis Frame using Finite Element Method. International Journal of Pure and Applied Mathematics, 118 (20), 961–972.
  • Pamungkas, P. M., Adhitya, M., Sumarsono, D. A. (2017). Design and Analysis of Tubular Space-Frame Chassis with Impact Absorbers on Sports Car Electric Vehicle. International Journal of Innovative Research in Science, Engineering and Technology, 6 (10), 20923–20928.
  • Mat, M. H., Ghani, A. R. A. (2012). Design and Analysis of "Eco" Car Chassis. Procedia Engineering, 41, 1756–1760. doi: https://doi.org/10.1016/j.proeng.2012.07.379
  • Markov, O. E., Perig, A. V., Zlygoriev, V. N., Markova, M. A., Grin, A. G. (2016). A new process for forging shafts with convex dies. Research into the stressed state. The International Journal of Advanced Manufacturing Technology, 90 (1-4), 801–818. doi: https://doi.org/10.1007/s00170-016-9378-6
  • Mohamad, M. L., Rahman, M. T. A., Khan, S. F., Basha, M. H., Adom, A. H., Hashim, M. S. M. (2017). Design and static structural analysis of a race car chassis for Formula Society of Automotive Engineers (FSAE) event. Journal of Physics: Conference Series, 908, 012042. doi: https://doi.org/10.1088/1742-6596/908/1/012042
  • Sachin, P., Vyavahare, A. Y. (2014). Effect of Gap on Strength of Fillet Weld Loaded in Out-of-Plane Bending. Advances in Structural Engineering, 2409–2416. doi: https://doi.org/10.1007/978-81-322-2187-6_183