Published November 16, 2026 | Version 1.5.0

Utah FORGE well 58-32: core description, laboratory rock mechanics and permeability, and stress measurements (Geothermal Data Repository 1162), standardized (Open Well Data)

Authors/Creators

Description

Core and laboratory results of Utah FORGE well 58-32 in granite: core description, rock mechanics and permeability tests and stress measurements (Geothermal Data Repository 1162), in fixed tables.

The three spreadsheets of 58-32_Cores_Testing_Results.zip mapped to three Open Well Data 1.5.0 tables, one row per published value or interval: core (the 4 cored intervals with lithology of Table 1, and the 18 steady-state permeability-to-water measurements of Table 2 of the permeability spreadsheet), rock_mechanics (new table of this release: triaxial compression with failure stress, Young's modulus, Poisson's ratio, density and porosity of Table ii, Mohr-Coulomb parameters of Table iii, tensile strength of Table iv, fracture toughness of Table v, and the field permeability from after-closure analysis of Table 1 of the permeability spreadsheet) and geomechanics (minimum stress gradients by each published method for each injection cycle, Table 2 of the stress spreadsheet, and reopening pressure and stress gradients, Table 3). The spreadsheets repeat some tables under two names (Tables ii-v and 2-5, Table 1 and C2 of the mechanical spreadsheet; Tables i-ii and 1-2 of the permeability spreadsheet). In the mechanical spreadsheet the roman-numbered tables are used (Table ii also gives density and porosity); in the permeability spreadsheet Tables 1 and 2 are used (Table 1 adds reservoir pressure; Table ii rounds the values of Table 2). The PDF reports are not copied. Depths from ft to m (x0.3048), measured from the kelly bushing, 21.5 ft above ground level (spreadsheet notes); md = driller's depth, with the logger's depth in description and the TVD where published. Stresses, pressures and moduli from psi to kPa; KIC from psi·in^0.5 to kPa·m^0.5; permeability from microdarcy to mD; porosity from % to v/v; transmissibility from md-ft to mD·m. In rock_mechanics the published value and unit are kept in source_value and source_unit. Stress gradients (psi/ft) written as equivalent mud weight (emw, g/cm3 = gradient in kPa/m divided by 9.80665); the report expresses them over the TVD of the bottomhole gauge, 7429 ft MD and 7421 ft TVD KB driller, which is the md and tvd of those rows; the uncased hole below the 7 in casing shoe (7374.9 ft) to 7525 ft is the tested interval (stress report text).

284 rows in 3 data table(s), plus a well_links table.

Attribution: McLennan, J. (2018). Utah FORGE: Well 58-32 Core Analyses [Data set]. Geothermal Data Repository. Energy and Geoscience Institute at the University of Utah. doi:10.15121/1557418 (CC BY 4.0). Changes: see README.

The standardized copy is released under CC BY-NC 4.0; the original data remain under Creative Commons Attribution 4.0 International (CC BY 4.0). Credit the provider as well as this record. Commercial use of the copy requires written permission from the author (contact@openwelldata.org). Values are given as reported by the source, without warranty, and the source has not endorsed this copy.

Questions and corrections: contact@openwelldata.org.

Notes

Sole creator: Daniel Delgado-Uriarte (© 2026, standardization only). The original data belong to the provider named above.

Files

gdr-utah-forge-58-32-core.zip

Files (47.6 kB)

Name Size
md5:5638b4a6b14829505b510a4bfdf01eed
42.8 kB Preview Download
md5:c22329eefaa19699a1acd31fef582ec3
2.9 kB Download
md5:231e9be96e3991769f3f451a37bad5dc
1.6 kB Preview Download
md5:7f4ca8507225a4b2e06bc7262e2ad463
246 Bytes Download

Additional details

Related works

Is derived from
10.15121/1557418 (DOI)
Is part of
Dataset: 10.5281/zenodo.23961755 (DOI)