Netherlands boreholes (NLOG): stratigraphic tops, deviation surveys and core porosity-permeability, standardized (Open Well Data)
Authors/Creators
Description
Stratigraphic tops, deviation surveys and core porosity-permeability of Dutch boreholes from the thematic files of NLOG, mapped to fixed tables. Depth references come from the NLOG borehole register, deposited as its own record, and the units were confirmed by NLOG.
Three files of the NLOG thematic borehole zip mapped to the Open Well Data 1.5.0 schemas, one row per source row, in the source order: nlog_stratstelsel to tops (111,651 rows), nlog_dirstelsel to survey (1,320,052 stations) and nlog_poroperm to core (219,667 measurements). The CSV files use ';' as separator and a decimal comma. Units and depth references were confirmed by NLOG (GDN Service Desk, ticket GDNSD-19976, 12 Nov 2026): all depths and offsets in metres; along-hole depths (TOP_AH, BOTTOM_AH, AH_DEPTH and the core DEPTH) from the reference point of the borehole; vertical depths (TV_TOP_NAP, TV_BOTTOM_NAP, TV_DEPTH_NAP) positive downward from NAP onshore and from MSL offshore; porosity in percent (written as v/v by dividing by 100); permeability in mD; grain density in g/cm3. The reference point of each borehole (type, height and datum, e.g. Rotary Table 28 m above MSL) comes from the NLOG borehole register (WFS layer nlog:gdw_ng_wll_all_utm, copy in Open Well Data 1.3.0, nlog-wfs-boreholes) and is written in depth_reference of every row and in reference_elevation of the survey; NLOG points to the same fields in the Excel export of its borehole overview. 3 wellbores of the tops file (83 rows) and 1 of the survey file (2,446 rows) are not in the register, and 1 more of the survey file (MS-BTR, 2 rows) is in the register without a reference point; their depth_reference says so. Negative heights are written as below the datum.
Known issues: NLOG says these thematic files were extracted one by one from reports, are not complete and have quality problems because the reports came in many formats; check values against the borehole reports where it matters. North reference of AZIMUTH: NLOG answered that it is not available and that COORD_SYSTEM_CD is only the coordinate system of the measurement (GDN Service Desk, GDNSD-19976); the codes are RD, ED50-UTM31, ED50-NEDTM, TRUE NORTH, ED50-GEOGR, ETRS89-UTM31 and WGS84-UTM31. Going beyond that answer, Open Well Data checked each wellbore (6,596 runs of consecutive rows with the same WELLBORE) against the published offsets: minimum curvature with four north references (true north and grid north of ED50 UTM 31N, of ED50 NEDTM, central meridian 5 deg E, and of RD), brought to the ED50 UTM31 grid (rotation only, no scale factor) and compared with DX/DY_UTM31_ED50 from the first station (error = largest distance over the stations). A reference is written in azimuth_reference only if it fits within 0.5 m + 0.05 % of the largest published offset, that offset reaches 1 m and every other reference is worse than the best one by at least max(0.05 m, 3 times the best error). Result: 4,292 runs fit the north of their own code (grid north of the projection for ED50-UTM31 770, ED50-NEDTM 691 and RD 2,467; true north for TRUE NORTH 357 and ED50-GEOGR 7); 315 runs fit another reference than their code suggests (229 RD runs fit true north, 219 of them TWR wellbores; 60 ED50-UTM31 runs fit true north; 17 RD runs fit UTM grid north; 4 ED50-NEDTM runs fit true north and 3 UTM grid north; the 2 ETRS89-UTM31 wellbores fit true north); 1,471 runs could not be decided (860 with published offsets under 1 m and 611 that fit more than one reference); 166 runs fit none of them; and 352 runs were not tested (several codes in one wellbore, a single station or missing values). Where no reference was determined, azimuth_reference says "not determined" with the reason and north and east are null (334,056 stations); north and east are filled at 985,996 stations and marked derived in the provenance. This is an inference from the data, not a statement of NLOG. TVD does not depend on it; dogleg severity does not either, except where the code changes: 103 wellbores change COORD_SYSTEM_CD along the survey (2,521 stations at a change), and there the dogleg may include the difference between references (above 5 deg/30 m at 424 of them, above 60 at 99).
1,651,370 rows in 3 data table(s), plus a well_links table.
Attribution: Source: NLOG (nlog.nl), thematic borehole data (version 23 Sep 2026), https://www.nlog.nl/en/boreholes. Changes: see README.
Terms in short: CC BY-NC 4.0 for this standardized copy and the NLOG disclaimer (copying, distribution and editing allowed, quoting NLOG.NL as the source) for the original data (details and the required attribution in LICENSE). Written permission is needed for commercial use. No warranty is given, and the copy is not affiliated with the source.
Creator: Daniel Delgado-Uriarte. Corrections: contact@openwelldata.org.
Notes
Files
nlog-v15.zip
Additional details
Related works
- Is derived from
- https://www.nlog.nl/en/boreholes (URL)
- Is part of
- Dataset: 10.5281/zenodo.23961755 (DOI)