Published November 14, 2026
| Version v0.3.25
Software
Open
Hertzon: an open-source electromagnetic design suite
Authors/Creators
Description
Added
- Derivative tuning with wave ports. A variable may now change the cross-section of a wave port (the trace width or substrate height of a grounded CPW at its port) or move a wave port with the end of its line (the line length): the port modes of every morphed mesh state are solved on its own port face, and the tuned Zo and propagation constant follow the sliders. Before, such a variable stopped with "moves 'Trace' at a wave port ... (only lumped ports can stretch)". The air box may also grow with a substrate whose height is tuned.
- Port Zo and Gamma in Solution Data. Matrix Data lists Gamma (alpha + j beta, 1/m) and Zo (ohm) of every
wave port mode (terminal) next to S, Y and Z: for the last adaptive pass, for each sweep and, under Adaptive
Passes, for every pass, so you can see whether the port impedance has settled and whether the port is sized
right. Reports over the passes can plot
Zo(1)andGamma(1)too. Passes solved before this version have no per-pass values. - Sampled frequencies of an interpolating sweep in the Message Manager: when the sweep finishes, one line lists all frequencies it solved for its interpolation (GHz, ascending).
Changed
- Integration lines in a Modes tab. The dialog of a wave or lumped port has a Modes tab with one row per mode: Integration Line None (the solver's line) or New Line..., which closes the dialog to pick start and end point in the 3D view and opens it again; the coordinates can also be typed. A wave port with several modes takes a line per mode: Zo of modes 2, 3, ... is taken along their own line (Zpv), before every mode was integrated along the line of mode 1. Projects keep their line as the line of mode 1; right click › Draw Integration Line stays as the short way.
Fixed
- Derivative tuning took the wrong face motion when gmsh ordered a face boundary differently in the perturbed builds: the side face of the GCPW substrate gave its bottom corners the motion of the top ones. The perturbed face boundaries are now matched point by point to the nominal ones.
- Return in the coordinate fields. Points typed into the X, Y, Z fields of the status bar are entered with Return also while a line or polyline is drawn; before, Return finished the line there and the typed point was lost.
- A click in the model view deselects a boundary or excitation (or mesh operation) selected in the Project Manager, so its highlighted faces go away.
Windows installer (Hertzon-Setup-*.exe) and Linux package (Hertzon-*-linux.tar.gz).
The FEM solver core of Hertzon is EMerge, the open-source FEM solver by Robert Fennis.
Notes
Files
c8501024/Hertzon-v0.3.25.zip
Additional details
Related works
- Is supplement to
- Software: https://github.com/c8501024/Hertzon/tree/v0.3.25 (URL)
Software
- Repository URL
- https://github.com/c8501024/Hertzon