Published November 5, 2026
| Version v1
Dataset
Open
Passiv-flexibler Trog für additiv gefertigte Schneckendosierer: Experimentelle Untersuchung der Drehmomentreduktion bei verschiedenartigen Schüttgütern
Authors/Creators
Description
Torque measurements at the drive of an additively manufactured (PLA) screw feeder for dry aggregates: Poraver (2–4 mm), quartz sand (0–2 mm) and gravel (4–8 mm) at 5, 10 and 20 rpm. Two trough variants were compared: a rigid PLA trough (korpus) and a passively flexible PVC-coated polyester tarpaulin (plane). Each run records 60 s of torque from an NCTE 3000-100 sensor together with run metadata and sensor calibration.
The data accompany the paper "Passiv-flexibler Trog für additiv gefertigte Schneckendosierer" (30. Fachtagung Schüttgutfördertechnik 2026).
Experimental setup
- Drive: Beckhoff AM8023 servo motor with AG3210 planetary gearbox (i = 40)
- Torque sensor: NCTE 3000-100 (NCTE-3000 series, type 100-0-A-0-0), mounted between gearbox and screw, upstream of a claw coupling that is designed as a predetermined breaking point
- Screw: FDM-printed PLA, D = 100 mm, length 256 mm, conical (decreasing core diameter, increasing pitch), right-hand thread
- Rigid trough (`korpus`): PLA, U-shaped, opening angle 90°, radial gap 2 mm, cover height 10 mm
- Flexible trough (`plane`): 680 g/m² PVC-coated polyester fabric enclosing the conveying section
- Procedure: Hopper filled, screw run for a few seconds to a stationary fill level, then 60 s of recording
- Acquisition: Tinkerforge Master Brick with Industrial Dual Analog In Bricklet (torque and distance) and Analog In V3 (scale); Python logger; nominal 20 Hz
Files
README.md
Additional details
Related works
- Is supplement to
- Conference paper: 978-3-948514-36-5 (ISBN)