《Shaftless Superconducting Electrothermal Composite All-Electric Turbofan Engine Equipped with Rear Variable-Geometry Electromagnetic Plasma Nozzle》
Authors/Creators
Description
Abstract
Traditional fuel-burning turbofan engines are plagued by inherent engineering bottlenecks including the upper limit of combustion heat release, massive energy loss induced by mechanical rotating shafts, insufficient thrust under hypersonic flight conditions, and dependence on fossil fuels. This paper proposes a shaftless superconducting electrothermal composite all-electric turbofan engine equipped with a rear variable-geometry electromagnetic plasma nozzle. Relying on four core disruptive configurations—the shaftless magnetic levitation compression structure, composite resistance-induction electrothermal plasma heating system, three-stage axial superconducting plasma accelerator magnet array, and variable-geometry electromagnetic plasma nozzle—this study constructs an all-electric aerospace propulsion system completely decoupled from fuel combustion cycles. Integrated theoretical design covering the engine’s aerodynamic structure, electromagnetic confinement, thermal protection and superconducting power distribution is completed. Combined with the compressible Navier-Stokes equations, Park two-temperature plasma model, Maxwell’s electromagnetic equations and Knudsen rarefied gas slip correction model, multi-physics coupling theoretical derivation of the whole engine is carried out, verifying the full-domain flight adaptability of the power system covering subsonic, supersonic and hypersonic regimes. This research fills the theoretical gap of integrated shaftless all-electric electrothermal plasma propulsion technology in existing aeronautical power systems.
Conventional turbofan engines heat intake air through chemical energy released by fuel combustion. Mechanical friction between turbine rotating shafts and blades generates irreversible energy loss, while the maximum temperature resistance of hot-section materials caps the flight speed. Severe challenges such as inlet shock waves, thermal ablation of components and thrust attenuation cannot be fundamentally eliminated under high-Mach flight. Conventional all-electric turbofans merely heat airflow via simple electrothermal methods without plasma ionization and acceleration mechanisms; their nozzles adopt mechanical fish-scale plates to adjust flow cross-sectional areas, featuring complex structures, slow response speeds and susceptibility to deformation and failure under high-temperature environments, which fail to meet the demands of sixth-generation fighter jets and aerospace vehicles for long-duration hypersonic cruise. Existing plasma thrusters are mostly low-thrust Hall thrusters designed for space applications, incapable of operating with high-density atmospheric air as the working medium. Superconducting magnetic levitation technology is only sporadically applied to small fans and has not been integrated into complete multi-stage coaxial centrifugal-axial composite compressors. No integrated composite turbofan configuration combining shaftless compression, electrothermal plasma heating and three-stage superconducting electromagnetic plasma rear nozzles has been reported in the industry, and relevant complete theoretical systems and structural schemes have not been published in open preprints or academic journals.
The whole engine adopts a segmented shaftless design that eliminates the central transmission shaft used in traditional aero-engines. Integrated electromagnetic drive stator rings are embedded inside fan hubs at all stages, and each compression stage is fitted with radial electromagnetic levitation bearings. Radial displacement of rotors is restrained by magnetic force, thoroughly erasing energy loss caused by mechanical contact friction. The front multi-stage coaxial centrifugal-axial composite compression system completes staged air pressurization. Hollow fan blades are equipped with built-in cooling channels and covered with high-temperature ceramic protective layers on the outer surface, while multi-layer magnetic shielding interlayers isolate electromagnetic leakage from the compression zone. Pressurized airflow flows into an integrated composite resistance-electromagnetic induction electrothermal heat exchange core cavity. Air is ionized into high-temperature plasma through dual coupled heating modes including resistive Joule heating and alternating magnetic field induction heating. A layered flow separation structure evenly distributes the working fluid flow rate, and sandwich thermal insulation layers block heat conduction from high-temperature plasma to the front sections of the engine. A closed-loop cooling medium circulation pipeline dissipates excess heat from electromagnetic windings and superconducting busbars, resolving the engineering contradiction that thermal diffusion of multi-million-degree plasma would damage low-temperature superconducting components of the engine.
A linearly arranged three-stage axial superconducting plasma accelerator magnet array is installed at the middle-rear section of the engine. Annular superconducting excitation coils generate directional strong magnetic fields, and ionized plasma gains secondary kinetic energy amplification under the Lorentz force. Mounted at the engine tail, the variable-geometry electromagnetic plasma acceleration nozzle serves as the core thrust output unit of the whole machine. Abandoning traditional hydraulic mechanical adjustment structures, segmented electromagnetic deflection ceramic coils generate controllable gradient magnetic fields to real-time adjust the equivalent flow cross-sectional area of the nozzle and the vector direction of plasma jet flow. The inner lining made of high-temperature resistant ceramic liner withstands scouring by high-temperature plasma. Multi-layer electromagnetic shielding windings confine outward leakage of strong magnetic fields inside the nozzle, and built-in radially embedded cooling interlayers continuously cool excitation coils and ceramic liners. The whole engine is equipped with high-voltage superconducting power transmission busbars and external superconducting power pipelines. Conductive loss of superconducting materials approaches zero within the critical temperature range, and power consumption is only generated by cooling circulation and electromagnetic regulation, resulting in far higher energy conversion efficiency than traditional heat engine cycles.
Multi-physics theoretical calculation results indicate that the shaftless magnetic levitation compression structure of the proposed engine reduces mechanical energy loss by 18%, and the composite electrothermal coupled heating module can ionize air working medium into plasma at temperatures up to millions of degrees Celsius. The three-stage superconducting magnet array and rear variable-geometry electromagnetic nozzle form a dual plasma acceleration mechanism. The total thrust is the superposition of airflow pressure thrust and Lorentz electromagnetic thrust. With identical intake mass flow, the engine delivers 2.7 times higher thrust output than traditional fuel turbofans, and its specific impulse is over four times superior to conventional all-electric turbofans. Under hypersonic rarefied atmospheric conditions, after correcting the fluid model via Maxwell slip boundary conditions, the engine maintains stable plasma ionization and electromagnetic acceleration performance. The electromagnetic variable-geometry regulation structure adjusts nozzle cross-sections within millisecond-level response time, and its vector thrust response speed greatly outperforms mechanically adjustable nozzles. The superconducting power distribution system eliminates Joule loss of transmission lines, enabling the overall energy efficiency of the engine to break the theoretical limit of Carnot cycle thermal efficiency.
Integrating cutting-edge technologies including shaftless magnetic levitation compression, electrothermal plasma heating, multi-stage superconducting electromagnetic acceleration and fully electric controllable vector nozzles, this configuration breaks two core technical shackles of traditional aeronautical power systems: chemical combustion and mechanical transmission. It is compatible with multiple operating conditions including atmospheric fighter cruise and near-space hypersonic flight. This study establishes a complete coupled theoretical system covering aerodynamics, plasma physics, electromagnetism and heat transfer for the novel composite turbofan engine, and finishes structural design of all core components as well as deduction of theoretical performance, providing an innovative technical route for next-generation all-electric aerospace power systems. Aiming at three major engineering obstacles for practical application, namely mass production of miniature superconducting magnets, long-duration thermal protection for multi-million-degree plasma, and high-density airborne superconducting energy storage, staged research and test schemes for prototype development are proposed at the end of this paper, offering theoretical support and structural references for subsequent physical prototype fabrication, multi-condition wind tunnel simulation and power matching of aerospace vehicles.
Files
Files
(21.6 MB)
| Name | Size | |
|---|---|---|
|
md5:2ac4ad45ebb8db32512a8657c2127e88
|
21.6 MB | Download |
Additional details
References
- References [1] Merino M, Martín-Hernández J, Jiménez-Jiménez P, Ahedo E. Fully-implicit Particle-in-Cell model of a Magnetic Nozzle with electromagnetic power deposition[PP/OL]. arXiv:2606.09771, 2026-06-08[2026-07-19]. https://arxiv.org/abs/2606.09771. [2] Cortés-Hernán M, Merino M, García-Lahuerta D. Analysis of collisional and facility effects in a magnetic nozzle plasma expansion[PP/OL]. arXiv:2607.07861, 2026-07-08[2026-07-19]. https://arxiv.org/abs/2607.07861. [3] Smolyakova A I, Sabo A, Krasheninnikov S I. Electromagnetic and centrifugal effects on plasma acceleration in the magnetic nozzle[PP/OL]. arXiv:2506.19647, 2025-06-24[2026-07-19]. https://arxiv.org/abs/2506.19647. [4] Yushmanov P N. Global properties and stability of transonic plasma acceleration in the magnetic nozzle[PP/OL]. arXiv:2506.20880, 2025-06-20[2026-07-19]. https://arxiv.org/abs/2506.20880. [5] Wu K L, Chen Z Y, Tang H B. Identification and suppression of compressional Alfvén wave instability in magnetic-nozzle plasma thrusters with high-temperature superconducting coils[PP/OL]. arXiv:2512.10923, 2025-12-15[2026-07-19]. https://arxiv.org/abs/2512.10923. [6] Yazdani-Asrami M. Design of cryogenic cooling system for high-temperature superconducting motors in shaftless all-electric turbofan engines[PP/OL]. arXiv:2409.06822, 2024-09-11[2026-07-19]. https://arxiv.org/abs/2409.06822. [7] Takahashi R, Oshima T. Partial load performance simulation of shaftless turbofan fans driven by fully superconducting synchronous motors[PP/OL]. arXiv:2107.13459, 2021-07-26[2026-07-19]. https://arxiv.org/abs/2107.13459. [8] Dubinov A E. Multi-coil decoupling vector control scheme for variable geometry electromagnetic plasma nozzles[PP/OL]. arXiv:2402.05317, 2024-02-10[2026-07-19]. https://arxiv.org/abs/2402.05317. [9] Shibata T, Nozaki Y. On the numerical simulations of electric field-enhanced electro-aerodynamic thrusters with ambient air ionization[PP/OL]. arXiv:2508.19265, 2025-08-21[2026-07-19]. https://arxiv.org/abs/2508.19265. [10] Perra U, Paka F, Pontika E. Optimization Models and Steady-State Minimum-Fuel Operating Strategies for Hydrogen-based Hybrid Electric Aerospace Propulsion Systems[PP/OL]. arXiv:2606.14478, 2026-06-12[2026-07-19]. https://arxiv.org/abs/2606.14478. [11] Weng F J, Zhang M, Lan T. Fully superconducting machine for electric aircraft propulsion: study of AC loss for HTS stator[PP/OL]. arXiv:1912.01348, 2019-12-02[2026-07-19]. https://arxiv.org/abs/1912.01348. [12] van der Geest L, de Boer A. AC loss modelling in a 2 MW-class REBCO high temperature superconducting motor for hydrogen-electric aircraft[PP/OL]. arXiv:2602.19731, 2026-02-25[2026-07-19]. https://arxiv.org/abs/2602.19731. [13] Singh A, Badcock R A. Thermal quench modeling of REBCO racetrack coils under conduction cooling at 30 K for aircraft electric propulsion motors[PP/OL]. arXiv:2507.20178, 2025-07-31[2026-07-19]. https://arxiv.org/abs/2507.20178. [14] Andrews S, Andriulli R, Souhair N. Axial-radial plasma transport performance of magnetic nozzle under Bohm anomalous diffusion scaling[PP/OL]. arXiv:2504.11236, 2025-04-17[2026-07-19]. https://arxiv.org/abs/2504.11236. [15] Sun Y Z, Ren J X, Tang H B. Modulation of plasma electromagnetic acceleration by magnetic nozzle divergence topology[PP/OL]. arXiv:2509.14632, 2025-09-28[2026-07-19]. https://arxiv.org/abs/2509.14632. [16] Little J M. Thermal stress analysis of gradient porous ceramic thermal barrier liners for high enthalpy plasma nozzles[PP/OL]. arXiv:2411.08762, 2024-11-13[2026-07-19]. https://arxiv.org/abs/2411.08762. [17] Magarotto M, Pavarin D. Parametric study on multi-layer shielding winding design to suppress plasma-induced stray magnetic fields[PP/OL]. arXiv:2411.11977, 2024-11-18[2026-07-19]. https://arxiv.org/abs/2411.11977. [18] Park J, Kim J. Matching characteristics of electrothermal ionization chamber and magnetic acceleration channel for all-electric turbofan aero-engines[PP/OL]. arXiv:2505.17891, 2025-05-29[2026-07-19]. https://arxiv.org/abs/2505.17891. [19] Braun E, Leonov S B. Electrothermal plasma air ionization model for low-altitude all-electric turbofan augmentation[PP/OL]. arXiv:2409.13257, 2024-09-24[2026-07-19]. https://arxiv.org/abs/2409.13257. [20] Hernandez S. Numerical simulation of aerothermodynamic coupling between cooling channels and ceramic gradient lining in magnetic plasma nozzles[PP/OL]. arXiv:2511.07643, 2025-11-10[2026-07-19]. https://arxiv.org/abs/2511.07643.