Published October 13, 2026 | Version v1
Other Open

A Discrete Analog Battery Management System for Single-Cell Li-ion and LiPo Batteries: Analytical Design and SPICE Validation

  • 1. ROR icon Regent University College of Science and Technology

Description

Integrated battery management chips have made discrete protection
circuits largely obsolete, but they also hide their thresholds behind
factory presets. I present a battery management system for single-cell
lithium-ion and lithium-polymer batteries built entirely from discrete
analog components. I combine two Schmitt-trigger comparators for
overcharge and over-temperature, a NOR gate that operates on their
inputs, a linear-regulator charging stage, a P-MOSFET over-discharge
switch, and a diode-based power path. Every threshold is derived in
closed form from resistor ratios and device parameters, and each
derivation is checked against a transient ngspice simulation. The
analysis shows that the hysteresis resistors load the sensing dividers
and move both switching edges away from the values of the bare dividers.
The closed-form edges reproduce the simulated overcharge trip exactly
(4.32 V) and the simulated thermal trip to within 0.2 $^\circ$C (49.3 $^\circ$C
predicted, 49.4 $^\circ$C simulated). The analysis also exposes three design
limits: the overcharge reference is ratiometric to the 5 V supply, the
charge current is limited by a series resistor and falls as the cell
charges, and the P-MOSFET threshold tolerance spreads the over-discharge
cutoff over about 0.6 V. I give design equations that correct each one.
Validation is at simulation level, and I release the netlists with the
paper.

Files

main.pdf

Files (3.6 MB)

Name Size
md5:b87887cfebbccf717f371d232b98e1bf
1.4 MB Preview Download
md5:21c72186134ea45e2b2fc438ec221695
2.1 MB Preview Download

Additional details

Related works

Is supplement to
Other: 10.5281/zenodo.23045349 (DOI)