Fractionation Of Plastic And Tyre Pyrolysis Oils
Authors/Creators
Description
Waste plastics and end-of-life tyres contain substantial hydrocarbon value that can be recovered through thermochemical conversion. Pyrolysis produces a complex liquid hydrocarbon stream whose boiling range is considerably broader than that of a single commercial fuel. The present work develops a preliminary engineering design for fractionating plastic and tyre pyrolysis oils at a nominal feed rate of 400 kg/h. The proposed system uses a packed stainless-steel fractionation column, thermic-fluid reboiler, reflux condenser, reflux drum, product coolers and dedicated product tanks. For design purposes, the pyrolysis oil is divided into four boiling-range cuts: petrol/light naphtha (20 wt%), heavy naphtha (15 wt%), diesel (40 wt%) and wax/heavy residue (25 wt%). The corresponding nominal product rates are 80, 60, 160 and 100 kg/h. A 400 mm internal-diameter, approximately 10 m high column with 25 mm stainless-steel Pall rings and an assumed packed height of 6.5 m is selected for preliminary design. A thermic-fluid reboiler of approximately 150 kW and a 20 kW overhead condenser are proposed. The study also examines the need for downstream treatment because fractionation alone does not establish compliance with automotive-fuel specifications. Literature indicates that plastic and tyre pyrolysis oils vary substantially with feedstock and process conditions, while tyre-derived oil may contain significant sulphur and other heteroatom compounds. Accordingly, the proposed fractionation plant is presented as a separation and feed-conditioning step for subsequent industrial-fuel use, blending, or further upgrading such as hydrotreatment.