Published September 23, 2026 | Version Version 1.0

TEAMx sEOP: WLS100S34 Doppler wind lidar data collected at Kramsach Oberberg

  • 1. University of Innsbruck

Description

ABSTRACT

This dataset was collected by a Leosphere Windcube 100S Doppler wind lidar (instrument name WLS100S34), operated by ACINN at Kramsach Oberberg, Austria, in the Inn Valley Target Area (IVTA). The data was gathered during the summer of 2025 within the framework of the TEAMx sEOP. Further details regarding TEAMx are available at http://www.teamx-programme.org, as well as in Serafin et al. (2020) and Rotach et al. (2022).

DATA SET DESCRIPTION

1. Location

The WLS100S34 Doppler wind lidar was deployed on the northern slope of the Inn Valley in the Oberberg district of the municipality of Kramsach, at 47.474940°N, 11.920056°E and 755 m MSL, within the Inn Valley Target Area (IVTA).

2. Period

The TEAMx sEOP took place from 16 June to 25 July 2025. This Doppler wind lidar dataset covers the period from 05 June to 27 July 2025.

3. Instrument details and scan description

Measurements were taken with a Doppler wind lidar, a Leosphere Windcube 100S, instrument name WLS100S34, on loan from the Meteorology Group of the Geophysical Institute at the University of Bergen. The instrument performed two alternating scans consisting of a Plan-Position-Indicator (PPI) scan and a  Range-Height-Indicator (RHI) scan, both performed in a continuous scanning mode (i.e., changing the scanner position at a continuous speed while measuring):

  • ppi_68 is a full-rotation PPI scan at an elevation angle of 70°, used to compute vertical wind profiles via the Velocity-Azimuth Display (VAD) technique.
  • rhi_67 is an RHI scan across the valley, starting in the north at an azimuth angle of 332.7°. The RHI scan does not cover the full 180° range, but omits low elevation angles to the north due to sloped terrain.

4. Data files

Provided are two datasets in separate zip archives:

  • raw_data_wls100s34.zip contains raw, uncorrected data in netcdf format. Data for each day is stored in a separate zip file with the date included in the file name (e.g., 20250607.zip). Data for each scan is stored in an individual gzipped netcdf file (e.g., WLS100s-34_2025-06-07_12-51-38_ppi_68_50m.nc.gz). The file name indicates the scan type: *_ppi_68_*.nc.gz or *_rhi_67_*.nc.gz (see Section 3 for a description of these scans).
  • vad_data_wls100s34.zip contains netcdf files of vertical wind profiles derived from radial velocity measurements of the ppi_68 PPI scans using the VAD technique (based on Equation 6 in Päschke et al., 2015). The data is grouped into daily netcdf files (e.g., WLS100S34_20250605_VAD.nc) with values averaged over 10-minute intervals. Averaging was performed by using all available PPI scans within each interval to compute a single profile, rather than computing profiles from individual scans and averaging them afterward. Any filters applied to the data are described in the netcdf attribute filter_description.

5. Quicklooks, movies and photos

Quicklook figures, movies, and photos are provided in the following zip archives:

  • vad_quicklooks_wls100s34.zip contains quicklook figures of the mean vertical profiles derived from PPI scans and stored as data in vad_data_wls100s34.zip. Quicklooks are available for various parameters, such as horizontal wind speed, vertical velocity, and backscatter intensity.
  • rhi_67_quicklooks_wls100s34.zip contains quicklook figures showing radial velocity for each rhi_67 RHI scan across the valley.
  • rhi_67_movies_wls100s34.zip contains movies of the rhi_67 RHI scans.
  • photos.zip contains photos of the lidar at the measurement site.

6. Contact

For questions regarding this dataset, please contact: alexander.gohm(at)uibk.ac.at.

7. Acknowledgements

We would like to thank Joachim Reuder and Stephan Kral from the Meteorology Group of the Geophysical Institute at the University of Bergen for providing and installing the WLS100S37 lidar. This work was funded by the Austrian Science Fund (FWF) through the research project HOTSPOT (Grant DOI: 10.55776/PIN2143424).

8. References

Päschke, E., R. Leinweber, V. Lehmann, 2015: An assessment of the performance of a 1.5 μm Doppler lidar for operational vertical wind profiling based on a 1-year trial, Atmospheric Measurement Techniques, 8, 2251–2266, https://doi.org/10.5194/amt-8-2251-2015

Rotach, M. W., S. Serafin, H. C. Ward, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. De Wekker, V. Grubišic, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Bailey, J. Schmidli, C. Wittmann, G. Wohlfahrt, D. Zardi, 2022: A collaborative effort to better understand, measure, and model atmospheric exchange processes over mountains. Bulletin of the American Meteorological Society, 103, E1282–E1295. https://doi.org/10.1175/bams-d-21-0232.1

Serafin, S., M. W. Rotach, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. De Wekker, M. Evans, V. Grubišić, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Raudzens Bailey, J. Schmidli, G. Wohlfahrt, D. Zardi, 2020: Multi-scale transport and exchange processes in the atmosphere over mountains: Programme and experiment. Innsbruck University Press. https://doi.org/10.15203/99106-003-1

Files

photos.zip

Files (37.7 GB)

Name Size
md5:ffb8afc9cf973da0b7da03b86fe5a948
1.8 MB Preview Download
md5:29294d269ee864a355d2dab991d4c2fa
28.1 GB Preview Download
md5:c845bde9e32f54b6e0ca6fc263db6400
1.4 GB Preview Download
md5:66038396af6a239f283eb9ca46ed8717
8.0 GB Preview Download
md5:3a4752298ce3b6031f19e7ee121c7368
5.9 kB Preview Download
md5:111fc3e92e76a0e7d1dffd3aab3a9c4a
181.5 kB Preview Download
md5:b4fdf62bc4192bf87133918e317c62a7
90.1 MB Preview Download
md5:bb44faa1bcf06fd95c9c1170dcb089f9
97.5 MB Preview Download

Additional details

Related works

References
Dataset: 10.5281/zenodo.22877709 (DOI)

Funding

FWF Austrian Science Fund
Horizontal shear production over complex terrain (HOTSPOT) 10.55776/PIN2143424