Published September 21, 2026 | Version Version 1.0

TEAMx sEOP: WLS100S37 and SLXR98 Doppler wind lidar data collected at Kramsach Museum

  • 1. University of Innsbruck

Description

ABSTRACT

This dataset was collected by two Doppler wind lidars, a Leosphere Windcube 100S (instrument name WLS100S37) and a Halo Photonics Streamline XR (instrument name SLXR98), operated by ACINN at Kramsach Museum, Austria, in the Inn Valley Target Area (IVTA). The data was gathered during the summer of 2025 within the framework of the TEAMx sEOP. Further details regarding TEAMx are available at http://www.teamx-programme.org, as well as in Serafin et al. (2020) and Rotach et al. (2022).

DATA SET DESCRIPTION

1. Location

The WLS100S37 and SLXR98 Doppler wind lidars were both deployed in an open-air museum at Kramsach (Museum Tiroler Bauernhöfe)—though during different periods (see below)—at 47.465144°N, 11.922550°E,  and 571 m MSL in the Inn Valley Target Area (IVTA).

2. Period

The TEAMx sEOP took place from 16 June to 25 July 2025. This Doppler wind lidar dataset covers the period from 04 June to 16 June 2025 for the WLS100S37 and from 05 July to 24 July 2025 for the SLXR98. Hence, the SLXR98 replaced the WLS100S37, though with a 19-day data gap. This gap was caused by an instrument failure of the WLS100S37, which required relocating the backup lidar SLXR98—then operated in Innsbruck to temporarily replace a lidar that had not yet been delivered—to Kramsach. Even during its operational period, the WLS100S37 dataset contains large gaps, particularly overnight, due to dew formation inside the scanner window caused by a failing internal ventilation system.

3. Instrument details and scan description

Measurements were taken with two Doppler wind lidars, a Leosphere Windcube 100S, instrument name WLS100S37, on loan from the Meteorology Group of the Geophysical Institute at the University of Bergen, and a Halo Photonics Streamline XR, instrument name SLXR98, on loan from METEK Meteorologische Messtechnik GmbH. Both instruments performed two alternating scans consisting of a Plan-Position-Indicator (PPI) scan and a  Range-Height-Indicator (RHI) scan, both performed in a continuous scanning mode (i.e., changing the scanner position at a continuous speed while measuring):

  • ppi_256 for WLS100S37 and User1 for SLXR98 is a full-rotation PPI scan at an elevation angle of 70°, used to compute vertical wind profiles via the Velocity-Azimuth Display (VAD) technique.
  • rhi_255 for WLS100S37 and User2 for SLXR98 is an RHI scan across the valley, starting in the north at an azimuth angle of 332.7°. The RHI scan does not cover the full 180° range, but omits low elevation angles close to the horizon due to obstacles in both directions.

4. Data files

Provided are four datasets in separate zip archives:

  • raw_data_wls100s37.zip contains raw, uncorrected data from the WLS100S37 lidar in netcdf format. Data for each day is stored in a separate zip file with the date included in the file name (e.g., 20250607.zip). Data for each scan is stored in an individual gzipped netcdf file (e.g., WLS100s-37_2025-06-07_12-51-38_ppi_256_50m.nc.gz). The file name indicates the scan type: *_ppi_256_*.nc.gz or *_rhi_255_*.nc.gz (see Section 3 for a description of these scans).
  • raw_data_slxr98.zip contains raw, uncorrected data from the SLXR98 lidar—specifically, native instrument files in hpl format. Data for each day is stored in a separate zip file with the date included in the file name (e.g., 20250706.zip). Data for each scan is stored in an individual hpl file (e.g., User1_98_20250706_124413.hpl). The file name indicates the scan type: User1_*.hpl or User2_*.hpl (see Section 3 for a description of these scans). Data from the brief vertical stares conducted between these scans are stored in separate files starting with Stare_*.hpl.
  • vad_data_wls100s37.zip contains netcdf files of vertical wind profiles from the WLS100S37 lidar derived from radial velocity measurements of the ppi_256 PPI scans using the VAD technique (based on Equation 6 in Päschke et al., 2015). The data is grouped into daily netcdf files (e.g., WLS100S37_20250605_VAD.nc) with values averaged over 10-minute intervals. Averaging was performed by using all available PPI scans within each interval to compute a single profile, rather than computing profiles from individual scans and averaging them afterward. Any filters applied to the data are described in the netcdf attribute filter_description.
  • vad_data_slxr98.zip contains netcdf files of vertical wind profiles from the SLXR98 lidar derived from radial velocity measurements of the User1 PPI scans. The same data processing steps were applied as for vad_data_wls100s37.zip.

5. Quicklooks, movies and photos

Quicklook figures, movies, and photos are provided in the following zip archives:

  • vad_quicklooks_wls100s37.zip contains quicklook figures of the mean vertical profiles from the WLS100S37 lidar derived from PPI scans and stored as data in vad_data_wls100s37.zip. Quicklooks are available for various parameters, such as horizontal wind speed, vertical velocity, and backscatter intensity.
  • vad_quicklooks_slxr98.zip contains quicklook figures of the mean vertical profiles from the SLXR98 lidar, similar to those in vad_quicklooks_wls100s37.zip.
  • rhi_255_quicklooks_wls100s37.zip contains quicklook figures from the WLS100S37 lidar showing radial velocity for each rhi_255 RHI scan across the valley.
  • user2_quicklooks_slxr98.zip contains quicklook figures from the SLXR98 lidar showing radial velocity for each User2 RHI scan across the valley.
  • rhi_255_movies_wls100s37.zip contains movies of the rhi_255 RHI scans conducted by the WLS100S37 lidar.
  • user2_movies_slxr98.zip contains movies of the User2 RHI scans conducted by the SLXR98 lidar.
  • photos.zip contains photos of the two lidars at the measurement site and a photo illustrating dew formation inside the scanner window of the WLS100S37 lidar that affected the measurements especially during nighttime (see Section 2).

6. Contact

For questions regarding this dataset, please contact: alexander.gohm(at)uibk.ac.at.

7. Acknowledgements

We would like to thank Joachim Reuder and Stephan Kral from the Meteorology Group of the Geophysical Institute at the University of Bergen for providing and installing the WLS100S37 lidar, and Hans-Jürgen Kirtzel from METEK Meteorologische Messtechnik GmbH for providing the SLXR98 lidar. This work was funded by the Austrian Science Fund (FWF) through the research project HOTSPOT (Grant DOI: 10.55776/PIN2143424).

8. References

Päschke, E., R. Leinweber, V. Lehmann, 2015: An assessment of the performance of a 1.5 μm Doppler lidar for operational vertical wind profiling based on a 1-year trial, Atmospheric Measurement Techniques, 8, 2251–2266, https://doi.org/10.5194/amt-8-2251-2015

Rotach, M. W., S. Serafin, H. C. Ward, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. De Wekker, V. Grubišic, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Bailey, J. Schmidli, C. Wittmann, G. Wohlfahrt, D. Zardi, 2022: A collaborative effort to better understand, measure, and model atmospheric exchange processes over mountains. Bulletin of the American Meteorological Society, 103, E1282–E1295. https://doi.org/10.1175/bams-d-21-0232.1

Serafin, S., M. W. Rotach, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. De Wekker, M. Evans, V. Grubišić, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Raudzens Bailey, J. Schmidli, G. Wohlfahrt, D. Zardi, 2020: Multi-scale transport and exchange processes in the atmosphere over mountains: Programme and experiment. Innsbruck University Press. https://doi.org/10.15203/99106-003-1

Files

photos.zip

Files (14.2 GB)

Name Size
md5:1dda1af2223a8a3daeb179be65d7465f
1.9 MB Preview Download
md5:35d1ed1a6ee8d39187f767f6704b584d
3.5 GB Preview Download
md5:821676447aa2cd3196425aff7d7ff671
5.6 GB Preview Download
md5:a56e1c234da8f6a47dba62198ee37553
421.7 MB Preview Download
md5:fb725ffde5bee469278073f72359412d
2.2 GB Preview Download
md5:d318360224576845059ec8526a365aa4
8.5 kB Preview Download
md5:e713315af78bf6d436d2082f9cf4b381
185.7 kB Preview Download
md5:5865cbe0a0163db1f0c00b51d933e8d9
319.6 MB Preview Download
md5:adb80e06d93637e224e61d28249a91f7
2.1 GB Preview Download
md5:ae2047fc76049cea3a27307c42eedace
11.7 MB Preview Download
md5:3b78dd978164335e316558d49b45ee8e
12.8 MB Preview Download
md5:55bd7ca60c499acd755ed442297b1cc5
35.1 MB Preview Download
md5:190f3ee31807c9ebf9b52e6ff2fb3a33
17.3 MB Preview Download

Additional details

Related works

References
Dataset: 10.5281/zenodo.22911018 (DOI)

Funding

FWF Austrian Science Fund
Horizontal shear production over complex terrain (HOTSPOT) 10.55776/PIN2143424