Published January 1, 2024 | Version v1

Growth-Rate-Dependent Mechanical Properties and Microhardness of a Pb–Sn–Cd Ternary Eutectic Composite

Description

The present work examines the relationship between anisotropic growth velocity and the mechanical behaviour of the Pb–Sn–Cd eutectic composite. The alloy was prepared from the constituent metals using the heat-chill method and its eutectic melting point was determined by differential scanning calorimetry. The composition investigated was Sn 51.2 wt%, Pb 30.6 wt%, Cd 18.2 wt%, with a measured eutectic melting point of 418.2 K. Macrohardness-related strength modes and Vickers microhardness were evaluated as functions of growth velocity, indentation time and applied load. At approximately 3.1 × 10⁻⁷ m s⁻¹, the modulus of rupture is 50.70 × 10⁵ N m⁻², tensile strength is 61.80 × 10⁴ N m⁻² and compressive strength is 64.20 × 10⁴ N m⁻². Microhardness rises from 17.60 kg mm⁻² at 0.50 × 10⁻⁷ m s⁻¹ to a maximum of 37.60 kg mm⁻² at 3.10 × 10⁻⁷ m s⁻¹ and then decreases to 17.80 kg mm⁻² at 7.50 × 10⁻⁷ m s⁻¹. At a 20 g load, microhardness remains nearly constant with indentation time, ranging approximately from 36.10 to 36.70 kg mm⁻² over 20–150 s. With indentation load, Hv decreases from 39.50 kg mm⁻² at 10 g to 18.10 kg mm⁻² at 100 g. The results demonstrate a characteristic optimum or moderate-growth region in which the fibrous eutectic microstructure and mechanical response are maximized. The observations support the interpretation that directional/fibrillar growth produces stronger, more coherent microstructures than instantaneous or very rapid growth.

Files

IJSET_V12_issue3_640.pdf

Files (547.2 kB)

Name Size
md5:4dacff9d98dfea4e4411cebcbecb4516
547.2 kB Preview Download

Additional details