Published June 22, 2026 | Version 1.0

Tangential Acceleration of a Five-Bar Linkage in a Collinear Singular Position: Analytical Limiting Formulas

  • 1. Independent researcher, Jagodina, Serbia

Description

This paper derives analytical limiting formulas for determining the velocity and tangential acceleration of one joint point of a planar five-bar linkage in a collinear singular position. The mechanism is assumed to pass through the singular position along a prescribed continuous branch of motion; therefore, the required kinematic quantities are defined as limiting values from neighbouring nonsingular positions.

The five-bar linkage is decomposed into two coupled four-bar submechanisms, but with moving effective bases. Therefore, the limiting formulas for a four-bar linkage with a fixed base cannot be applied by simple substitution of the submechanism link lengths. The proposed procedure determines the limiting behaviour of both moving-base submechanisms separately and then sums the corresponding partial velocities and partial tangential accelerations at the joint point. After introducing the limiting formulas for the singular position, compact computational formulas for the total velocity and tangential acceleration are also obtained.

The numerical example shows that direct summation of formulas for four-bar linkages with fixed bases gives an incorrect velocity, whereas the velocity obtained by the moving-base procedure is independently confirmed on the basis of the equality of normal accelerations in the collinear position. Additional checks using a near-singular position and a reduction to a four-bar linkage with a fixed base confirm the consistency of the derived formulas.

Files

five_bar_linkage_collinear_singular_position_preprint.pdf

Files (466.0 kB)

Name Size
md5:c6979ecbcbfd9d696576a3a05e677935
466.0 kB Preview Download