Decarbonizing Heating and Cooling Systems via a 5GDHC Network Powered by Shallow Geothermal Energy: A Case Study from the Catalan Pyrenees in the FlexGeo Project
Authors/Creators
- 1. Department of Mining, Industrial and ICT Engineering. Universitat Politècnica de Catalunya, Av/ Bases de Manresa 61, E-08242 Manresa. Barcelona. Spain
- 2. Àrea de Recursos Geològics, Institut Cartogràfic i Geològic de Catalunya (ICGC), Parc de Montjuïc s/n, 08038, Barcelona, Spain
- 3. Conselh Generau d'Aran (CGA), Plaça d'Aran 1-2, 25530, Vielha, Spain
- 4. Àrea de Geofísica, Institut Cartogràfic i Geològic de Catalunya (ICGC), Parc de Montjuïc s/n, 08038, Barcelona, Spain
Description
Decarbonizing the heating and cooling sectors is a key challenge in Europe’s fight against climate change. Aging and inefficient systems present opportunities for innovative solutions like fifth-generation heating and cooling district (5GDHC) networks, which integrate renewable energy sources for maximum efficiency and minimal greenhouse gas (GHG) emissions. In Vielha, a town in the Catalan Pyrenees (NE Spain), many public and private buildings require modernization of their outdated, fossil fuel-dependent heating and cooling systems. To tackle this, the local government of the Aran Valley (CGA) and the municipality are promoting solutions based on local and renewable energy. A key initiative is the "Vielha Smart Multi-RES micro DHC grid," aimed at decarbonizing public buildings through a 5GDHC that combines shallow geothermal energy with solar photovoltaic energy. As part of this initiative, the CGA in collaboration with the Geological Survey of Catalonia (ICGC) conducted a fieldwork campaign mainly during 2024 to characterize the hydrogeological properties of the ground. This campaign involved new drilling instrumented boreholes with sensors and fiber-optic up to 100 meters deep, coring, and performing DTRT tests to further develop a 3D flow and heat transport model to design the borehole heat exchangers (BHE) field array following a Borehole Thermal Energy Storage (BTES) concept. The geological model integrates reinterpreted data from two previous geophysical campaigns (2012 and 2020), which focused on determining the Quaternary infill geometry of the valley and the depth to bedrock, using the H/V spectral ratio technique. Additionally, under the co-funded Horizon Europe R&D project FlexGeo 2024-2028 (Pathing the Way for Flexible Geothermal Energy Systems with Reversible ORC Systems, Advanced Control and Novel System Designs), led by the Technical University of Munich, ICGC address the dynamic energy modelling of the Vielha case study in OpenModelica. This model, utilizing the Modelica Buildings Library (v.10.0.0) and Modelica Standard Library (v.4.0.0), conceptualizes a 1-pipe 5GDHC network where a centralized borefield serves as the balancing unit. The modelled thermal loads include those from a sports center, an ice rink, a swimming pool and two educational buildings. By examining current demands and building characteristics, various prospective scenarios have been analyzed to generate an optimal and flexible solution, enhancing energy efficiency on the supply side.