NUMERICAL INVESTIGATION OF CASING TREATMENT EFFECTIVENESS FOR BLI-LIKE DISTORTION AT VARIOUS SKEWED ANGLES
Authors/Creators
Description
Boundary Layer Ingestion is a critical technology for future
high-efficiency aircraft, but the inherent inlet distortion poses
significant challenges to fan stability. This paper numerically investigates
the effectiveness of an arc-shaped slotted casing treatment
with varying skew angles to increase the stall margin in a
transonic fan under BLI-like conditions. The results show that
under distorted inflow, stall is initiated by the amplification of
the tip leakage vortex within the low-momentum region, leading
to severe passage blockage at the distortion sector’s exit. The
casing treatment enhances stability by inducing a dual momentum
exchange mechanism: it suctions low-momentum fluid downstream
of the passage shock and re-injects it upstream, effectively
suppressing the blockage. A key finding is the direct correlation
between the slot skew angle and the stability enhancement; stall
margin improvement (SMI) increased from a marginal 0.62% for
a 35° angle to a substantial 30.72% for a 55° angle. This performance
difference is attributed to the treatment’s ability to accommodate
the increasing radial flow angle of the suction flow
as the fan is throttled. The study concludes that a larger skew
angle provides a more robust match with the flow dynamics near
stall, offering a highly effective design strategy to improve the
stability of fans operating under severe inlet distortion.