MECHANICAL & APPLIED SCIENCE DOMAIN
Published April 22, 2026 | Version v1
Journal article Open

Smart Solar Tracker System for Maximizing Solar Panel Efficiency

Description

Solar energy is one of the cleanest and most widely available sources of power on earth, yet much of its potential goes untapped simply because solar panels are not positioned to face the sun throughout the day, and because dust and dirt accumulate on panel surfaces over time and block incoming light. This paper addresses both problems together. It presents the design, construction, and testing of a smart dual-axis solar tracking system combined with a motor-driven rotating brush mechanism for automatic panel cleaning — all controlled by a low-cost microcontroller. The tracker uses light-dependent resistors (LDRs) to detect the position of the sun and adjusts two servo motors to align the panel continuously with the sun from morning to evening. The cleaning mechanism runs a soft rotating brush across the panel surface at programmable intervals, driven by a small DC motor, removing dust without the need for water or human effort. Field testing at a rooftop installation in Pune showed that the dual-axis tracker improved daily energy output by 34.6 percent over a fixed-tilt panel, and the auto-cleaning mechanism recovered an additional 11.2 percent of output that was being lost to dust accumulation over a seven-day period. Together the two systems delivered a combined efficiency improvement of approximately 42 percent compared to a conventional fixed, unclean panel. The system uses simple, commercially available components, is easy to maintain, and is well suited to agricultural, residential, and small industrial applications in dusty regions of India.

Files

Smart solar Tracker system for maximizing solar panel Efficiency.pdf

Files (451.1 kB)

Additional details

References

  • Abdallah, S., & Nijmeh, S. (2004). Two axes sun tracking system with PLC control. Energy Conversion and Management, 45(11–12), 1931–1939. https://doi.org/10.1016/j.enconman.2003.10.007
  • Mousazadeh, H., Keyhani, A., Javadi, A., Mobli, H., Abrinia, K., & Sharifi, A. (2009). A review of principle and sun-tracking methods for maximising solar systems output. Renewable and Sustainable Energy Reviews, 13(8), 1800–1818. https://doi.org/10.1016/j.rser.2009.01.022
  • Seme, S., Stumberger, G., & Voršič, J. (2011). Maximum efficiency trajectories of a two-axis sun tracking system determined considering tracking system consumption. IEEE Transactions on Power Electronics, 26(4), 1280–1290. https://doi.org/10.1109/TPEL.2010.2076292
  • Huang, B. J., Ding, W. L., & Huang, Y. C. (2013). Long-term field test of solar tracker performance. Solar Energy, 86(7), 1076–1084. https://doi.org/10.1016/j.solener.2012.12.019
  • Sharaf, O. Z., & Orabi, M. F. (2012). Photovoltaic technology: The case for thin-film solar cells. Renewable and Sustainable Energy Reviews, 16(3), 2016–2040. https://doi.org/10.1016/j.rser.2011.12.001
  • Rao, A., Pillai, R., Mani, M., & Ramamurthy, P. (2014). Influence of dust deposition on photovoltaic panel performance. Energy Procedia, 54, 690–700. https://doi.org/10.1016/j.egypro.2014.07.310
  • Adinoyi, M. J., & Said, S. A. M. (2013). Effect of dust accumulation on the power outputs of solar photovoltaic modules. Renewable Energy, 60, 633–636. https://doi.org/10.1016/j.renene.2013.06.014
  • Ghazi, S., Sayigh, A., & Ip, K. (2014). Dust effect on flat surfaces—A review paper. Renewable and Sustainable Energy Reviews, 30, 742–750. https://doi.org/10.1016/j.rser.2013.11.031
  • Conceição, R., Silva, H. G., Mirão, J., Gostein, M., Fialho, L., Narvarte, L., & Collares-Pereira, M. (2018). Saharan dust transport to Europe and its impact on photovoltaic performance: A case study of soiling in Portugal. Solar Energy, 160, 94–102.
  • Kazem, H. A., Al-Waeli, A. H. A., Chaichan, M. T., Sopian, K., & Alnaser, W. E. (2020). Optimum design and evaluation of solar tracking system for maximizing power output. Case Studies in Thermal Engineering, 19, 100619. https://doi.org/10.1016/j.csite.2020.100619