Published March 26, 2026 | Version v1

Dataset associated with "Intermittent gas-liquid rearrangement controls the mixing of gases in porous media"

  • 1. ROR icon Commonwealth Scientific and Industrial Research Organisation
  • 2. ROR icon Ghent University
  • 3. ROR icon Université Rennes 1

Description

This dataset is associated with the paper "Intermittent gas-liquid rearrangement controls the mixing of gases in porous media" by Jackson et al. 2026. It contains raw X-Ray micro-CT data and processed data. We include the processing scripts and code used to analyse the data including the PNM analysis and ADE continuum modelling. All information regarding the data processing and parameters is given in the main paper or supporting information. 

Throughout the data and processing codes here, 'Experiment8' or 'Exp8' refers to the main experimental campaign, encompassing the 3 sub-experiments that are discussed in the paper (Experiment CG, PT and DG). The three sub-experiments are labelled experiment 1 (Experiment CG), experiment 2 (Experiment DG) and experiment 3 (Experiment PT).

Main files:

  1. Raw X-Ray micro-CT files are contained in the files 'Raw_Images1' to 'Raw_Images8'. These files should be uncompressed and copied into a main folder called 'Raw_Images' for use in the processing codes. The images contained in these folders are 8 bit .tif images of size 436 x 436 x 560 voxels, with each voxel having a uniform side length of 12.6 microns. All images have been mutually registered.

  2. Processed data files are contained in the files 'data_1' to 'data_11'. These files should be uncompressed and copied into a main folder called 'Data' for use in the processing codes. The resulting folder tree will then contain the following folders & data:
    1. 3D_processed_data. This is the processed 3D saturation and composition data stored in .mat matrix format.
    2. ADE_sim_results. This contains uncertainty runs for the main Advection-diffusion equation solution.
    3. ImageAq_data. This contains image acquisition timing data.
    4. Inlet_polygon_masks. This contains some 2D masks for the inlet region of the 2D cross-sectional images.
    5. PNM. This contains the images used for the pore network extraction, and the resulting pore network data files.
    6. Pressure_data. This contains the transducer pressure, temperature data along with the pump pressure, temperature, volume and flow rate data.
    7. Visualisation. This folder contains 3D composition data used for creating the various images and videos, stored in the folder 'Mat3D'. It also contains the avizo snapshots, and the resulting stills and videos from the image plotting codes. The final images in the paper are from the 'Stills' folder.
    8. There are then several individual files: 'Exp8_AqTimingsExp.mat', 'Exp8_compiled_12um_ref_images_cal.mat', 'Exp8_compiled_ImageStatistics.mat', 'Exp8_Dry_segs.mat', 'Exp8_PNM_Exp_data_MBs_VElems_PoreFilling.mat', 'Exp8_dry_filtered_segmented_eroded.tif', 'Exp8_dry_filtered_segmented.tif', 'Exp8_compiled_12um_images_Exp1.mat', 'Exp8_compiled_12um_images_Exp2.mat', 'Exp8_compiled_12um_images_Exp3.mat'. These contain various processed datasets generated, and used by the main processing scripts, including statistical analysis, pore-filling and segmented data.

  3.  Matlab scripts used for processing the data, performing analysis and plotting the figures in the paper. Note, the image & data paths may have to be modified depending on where you have saved the files from 1. and 2. above.
    1. A1_0_Calculate_ImageTimings.m. Calculates the X-Ray CT image timings.
    2. A1_1_Calculate_ExperimentalTimings.m. Calculates various experimental timings such as valve operations etc.
    3. A1_2_Analyse_ExperimentalPressureTemperature.m. Analyses the pressure and temperature in the experiments.
    4. A1_3_Calculate_FluidProperties.ipynb. Calculates fluid properties in the experiments based on measured pressure and temperatures.
    5. A1_4_Calculate_Permeability.m. Calculates the permeability of the sample
    6. A1_5_Analyse_FlowRegime.m. Calculates the experimental flow regime in terms of Peclet, Capillary and Reynolds number etc.
    7. A2_0_Create_DryPoreSpaceImages_Porosity.m. Creates pore space images of the dry sample.
    8. A2_1_Create_ReferenceCalibrationImages.m. Creates reference images of the sample under different partial pressures of krypton gas.
    9. A2_2_Analyse_ReferenceCalibrationStats.m. Analyses the reference calibration image statistics.
    10. A3_0_Create_MainExperimentalImages.m. Creates the main filtered experimental images.
    11. A3_1_Create_CroppedExperimentalImagesAvizo.m. Crops the images for read-in to Avizo for visualisation.
    12. A3_2_Run_PNM.m. Runs the pore network extraction tool from Imperial College London, on the dry pore space images (see extra functions below).
    13. A4_0_Process_ImagesStatistics.m. Processes various image statistics.
    14. A4_1_Process_PNMFillingData.m. Processes the pore network data.
    15. A5_0_Plot_ImageStillsVideos.m. Creates image stills and videos from the processed data. These images appear in Figures 1, 2 and 5 in the main paper.
    16. A5_1_Plot_ConnectivityMetrics.m. Plots gamma and Euler characteristic for use in Figure 3 in the main paper.
    17. A5_2_Plot_PoreFillingStatistics.m. Plots pore filling statistics for use in Figure 3 in the main paper.
    18. A5_3_Plot_ADE_ContinuumMetrics.m. Solves the Advection-diffusion equation and compares to the experimental results. Plots the variance and mean composition for use in Figure 4 in the main paper. 

  4. Functions required to run the scripts are contained in the 'Functions' folder. Other external programs/functions required to run the scripts:
    1. natsortfiles from Matlab  - https://www.mathworks.com/matlabcentral/fileexchange/47434
    2. cbrewer from Matlab - https://www.mathworks.com/matlabcentral/fileexchange/58350-cbrewer2
    3. Pore network extraction from Imperial College London - https://github.com/ImperialCollegeLondon/pnextract
    4. Fluid properties calculation requires REFPROP from NIST https://www.nist.gov/srd/refprop implemented in Python through the CoolProp package https://coolprop.org/

Files

Raw_Images1.zip

Files (144.2 GB)

Name Size
md5:62d0ddf68c272424a4f7e0264d24c635
5.2 kB Download
md5:4815f3e961b67a3865de5ca6c243e6fd
4.1 kB Download
md5:62a7556227e2d0a82ab05101b8637db4
8.6 kB Download
md5:f6a3d12c7d8d2f60cfda34bf98a9e7d5
3.9 kB Preview Download
md5:72540514182e76e2e420b87a65978bb8
8.8 kB Download
md5:bd44f8beb93246c359cb42760aa71d5e
2.7 kB Download
md5:35a9adab43890130f4bbeffede24eb4a
6.2 kB Download
md5:4c49139d8a1bf65ff7bb1d66360666cb
1.7 kB Download
md5:8f9463bf77c774e916c0486fb3c256a7
4.9 kB Download
md5:75f6024d5bf401bd277df2e097b82b5c
7.3 kB Download
md5:34c821cf50958c16bde16597b6e8d6e2
2.9 kB Download
md5:64b5b15ab1849fee950a495f9390707b
1.8 kB Download
md5:8ccce4a50054d6f63976efac7f04a5d5
9.3 kB Download
md5:f58637117b83fd548a906ec633f2a4c5
10.3 kB Download
md5:0c5cc22213623843924433496d3940be
25.5 kB Download
md5:b64d6f04df0afb94e8306ac1d375902e
4.6 kB Download
md5:ab50fc3a2dd3c61197378cf12d68ba01
9.1 kB Download
md5:5ffd4c8832af07b91ec853114f9f10d0
34.0 kB Download
md5:c0ce739a5012e7aae5a59f254a23f400
1.9 GB Preview Download
md5:dccbf339882c26fe28cc6c7a96e05cae
6.2 GB Preview Download
md5:1a4f061a602a9efe8ff8a84fb25adcbc
1.1 GB Preview Download
md5:6f018c9921f5fed573622842da043fe0
12.1 GB Preview Download
md5:d7bdb038a0017ceca4acdf459e7fa5a9
11.2 GB Preview Download
md5:6927e2355bda7a0ab46eed03d22755fe
6.4 GB Preview Download
md5:152bc65e628390e9dd7200670d7ff09b
9.3 GB Preview Download
md5:6680593ff8a9ef65d1ccd2e05dd1cb10
7.0 GB Preview Download
md5:a3fa25be0e1d2f986996b3db8c0e0632
4.5 GB Preview Download
md5:36e1ee5d82cdb7ac3e4085349b8de33a
13.0 GB Preview Download
md5:9342674b794966751cda504fec7bd99e
9.2 GB Preview Download
md5:8ca6a6b76a73b0c3603173f880543f26
9.2 kB Preview Download
md5:ccfb00900bd00adfae35436dc1416395
7.0 GB Preview Download
md5:990320b5e55f0aad5409db786a22b2cb
7.7 GB Preview Download
md5:3c5147b05f1ec42485859728bf6f1446
7.9 GB Preview Download
md5:ef52d030e27aec280a2e443381b3d7a9
5.1 GB Preview Download
md5:660453cc3b364111a75c89fed7b5a7c3
10.0 GB Preview Download
md5:9ba75ec26617cfb2edce02188e6fe83f
9.9 GB Preview Download
md5:d66b873422516596272be35eb2260ba7
7.3 GB Preview Download
md5:34acdb0327d2db8dd6ac5cc63aa27c5a
7.3 GB Preview Download

Additional details

Funding

Commonwealth Scientific and Industrial Research Organisation
Julius Career Award
European Union
EXCITE 101005611
Research Foundation - Flanders
1182822N
Ghent University
BOF.COR.2022.0008
Research Foundation - Flanders
G004820N
Research Foundation - Flanders
G051418N
Research Foundation - Flanders
G037222N