PAMSIM 1mm Cube Validation Model VTU Series - Surface Convection

Thermal process simulation of scanwise processing of a 1.2mm by 1.2mm by 0.24mm, set upon an additional substrate block. The part and substrate block are resolved into a mesh of cubic elements 0.01mm per side. The scan strategy uses 1mm scan vectors starting at the bottom-left corner of the part, inset from the edges by 0.2mm, and uses alternating scan directions with each subsequent scan track. The tracks are spaced 100 microns apart and starting oriented in the positive X axis, rotating 67 degrees clockwise on each subsequent layer. Uses temperature-dependent material properties of 316L Stainless Steel including conduction, and build-surface convection @ 50 W/m^2*K. VTU time series files are readable by ParaView and PyVista libraries. Nodal thermal results are stored in the "RESULT0" data descriptor.