Cadmium and Zinc‐Doped p‐type Sb2Se3 Single Crystals and Solar Cells
Authors/Creators
-
Shalvey, Thomas P
(Researcher)1
-
Hobson, Theodore
(Researcher)2
-
Herklotz, Frank
(Researcher)3
-
Kaupmees, Reelika
(Researcher)4
- Almushawwah, Aeshah A (Researcher)1
-
Don, Christopher H
(Researcher)4
- Kavanagh, Sean R (Researcher)5
-
Scanlon, David
(Researcher)6, 7
-
Dhanak, Vin
(Researcher)2
-
Grossberg-Kuusk, Maarja
(Researcher)4
- et al. Show all 13 authors
-
Shalvey, Thomas P
(Researcher)1
-
Hobson, Theodore
(Researcher)2
-
Herklotz, Frank
(Researcher)3
-
Kaupmees, Reelika
(Researcher)4
- Almushawwah, Aeshah A (Researcher)1
-
Don, Christopher H
(Researcher)4
- Kavanagh, Sean R (Researcher)5
-
Scanlon, David
(Researcher)6, 7
-
Dhanak, Vin
(Researcher)2
-
Grossberg-Kuusk, Maarja
(Researcher)4
-
Lavrov, Eduard
(Researcher)
-
Durose, Ken
(Researcher)
-
Major, Jonathan
(Researcher)2
Description
Achieving controlled p‐type doping in Sb 2 Se 3 is critical for its development as a photovoltaic absorber. In this work, the incorporation of Cd and Zn as extrinsic dopants in Sb 2 Se 3 single crystals and thin films, with concentrations ranging from 10 16 to 10 20 , is investigated. Both dopants successfully induce p‐type conductivity, but Cd consistently yields lower resistivities and avoids compensation over a wider range of dopant concentrations. Cd‐doped Sb 2 Se 3 single crystals exhibit hole densities exceeding 10 , while thin films achieve over 10 , values suitable for efficient solar cell operation. A shallow 22 meV acceptor level appears to be compensated by a deeper lying state around 389 meV, which is intrinsic to Sb 2 Se 3 and limits the achievable free hole concentration. Despite this, solar cells fabricated using Cd‐doped Sb 2 Se 3 (at 10 ) show enhancements in open‐circuit voltage by ≈60 and ≈20 mV for devices prepared via thermal evaporation and close‐spaced sublimation respectively, relative to n‐type Cl‐doped Sb 2 Se 3 . These results establish Cd as a promising dopant for enabling robust p‐type conductivity and enhancing the photovoltaic performance of Sb 2 Se 3 ‐based devices.