Published December 30, 2025 | Version CC-BY-NC-ND 4.0
Journal article Open

Kinetic Parameter Estimation and Optimization of Bio-Oil and Phenol Production from Mahogany Wood Via Pyrolysis and Fluid Catalytic Cracking Using gPROMS

Authors/Creators

  • 1. Associate Professor, Department of Chemical Engineering, University of Uyo, Nigeria.

Contributors

  • 1. Researcher, Department of Chemical Engineering, University of Uyo, Nigeria.
  • 2. Associate Professor, Department of Chemical Engineering, University of Uyo, Nigeria.
  • 3. Department of Chemical Engineering, University of Uyo, Nigeria.

Description

Abstract: The thermochemical conversion of wood waste into high-value biofuels and chemicals for energy use represents a promising approach to clean, sustainable energy. This research investigates the modeling, simulation, and optimization of bio-oil and phenol production from mahogany wood waste (Swietenia macrophylla) using an integrated process approach of fast pyrolysis and fluid catalytic cracking (FCC). Kinetic parameters were estimated, and process conditions were optimised using the gPROMS ModelBuilder 4.0 software. The application of a Franz kinetic model during the pyrolysis stage identified an activation energy of 106.7 kJ/mol and a maximum bio-oil yield of 41.98% under optimal conditions of 558.7°C, a residence time of 1.92 s, and a heat capacity of 2.50 kJ/kg·K. The ensuing fluid catalytic cracking stage, developed with a novel nine-lump kinetic model, realised a maximum phenol yield of 37.086% at 595.28°C, a residence time of 2.48 s, a weight hourly space velocity (WSHV) of 16.58 h⁻¹, and a catalyst-to-oil (C/O) ratio of 7.2. A statistical tool, analysis of variance (ANOVA), confirmed the models' statistical significance, with R² values of 0.9984 for pyrolysis and 0.8926 for fluid catalytic cracking (FCC), respectively. Model predictions showed 70.6% accuracy when computed against actual experimental data. These outcomes highlight the efficacy of gPROMS for kinetic modeling and simulation of complex biomass conversion processes.

Files

A114013010126.pdf

Files (837.2 kB)

Name Size Download all
md5:41024b649368fba217b7be309907b083
837.2 kB Preview Download

Additional details

Identifiers

DOI
10.35940/ijies.A1140.12121225
EISSN
2319-9598

Dates

Accepted
2025-12-15
Manuscript received on 04 December 2025 | Revised Manuscript received on 08 December 2025 | Manuscript Accepted on 15 December 2025 | Manuscript published on 30 December 2025

References

  • IEA. (2023). World Energy Outlook 2023. Paris: IEA. https://www.iea.org/reports/world-energy-outlook-2023
  • Akinwale, O. M., and Adepoju, T. F. (2022). A review on the generation, utilisation and management of wood waste in Nigeria. Journal of Material Cycles and Waste Management, 24(1), 1–14. DOI: https://doi.org/10.1007/s10163-021-01294-5
  • Bridgwater, A. V. (2012). Review of fast pyrolysis of biomass and product upgrading. Biomass and Bioenergy, 38, 68-94. DOI: https://doi.org/10.1016/j.biombioe.2011.01.048
  • Czernik, S., & Bridgwater, A. V. (2004). Overview of applications of biomass fast pyrolysis oil. Energy & Fuels, 18(2), 590-598. DOI: https://doi.org/10.1021/ef034067u
  • Huber, G. W., Corma, A. (2007). Synergies between bio- and oil refineries for producing fuels from biomass. Angewandte Chemie International Edition, 46(38), 7184-7201. DOI: https://doi.org/10.1002/anie.200604504
  • Samuel, A., Inyang, U., and , Essang, J. (2025). Importance and Application of Pyrolysis of Organic Waste in Chemical Processing Industry: A Review. International Journal of Advances in Engineering and Management (IJAEM). 7(6): 415-422. www.ijaem.net ISSN: 2395- 5252. https://ijaem.net/issue_dcp/Importance%20and%20Application%20of %20Pyrolysis%20of%20Organic%20Waste%20in%20Chemical%20Pr ocessing%20Industry%20%20A%20Review.pdf
  • Samuel, A., Essang, J. Oboh, I., Inyang, U., and Egemba, K. (2025). Economic Analysis of Pyrolysis of Wood Waste to Produce Bio-Oil. Iconic Research and Engineering Journal (IRE). 8(11): 2285-2298. ISSN: 2456-8880. https://www.irejournals.com/paper-details/1708413
  • Gao, Y., Yu, B., Wu, K., Yuan, Q., Wang, X., and Chen, H. (2016). Physicochemical, pyrolytic, and combustion characteristics of hydrochar obtained by hydrothermal carbonization of biomass. Journal of BioResources. 11(2): 4113-4133. DOI: https://doi.org/10.15376/biores.11.2.4113-4133
  • Sun, Y., Liu, L., Wang, Q., Yang, X. and Tu, X. (2016). Pyrolysis products from industrial waste biomass based on a neural network model. Journal of Analytical Applied Pyrolysis. 120: 94-102. DOI: https://doi.org/10.1016/j.jaap.2016.04.013.16.
  • Luo, C., George, M.M. and Frank, E. (2015). Modeling and Optimization of Flash Pyrolysis of Wood Waste in a Fluidized Bed Reactor Using Hysys. IRE publication. 16: (3) 124–155
  • Chukwuneke J.L., Ewulonu, M.C., Chukwujike I.C. and Okolie P.C. (2019). Physico-chemical analysis of pyrolyzed bio-oil from swietenia macrophylla (mahogany) wood. Journal of Scientific African, published by Elsevier. 16(2): 23 -79 DOI: https://doi.org/10.1016/j.heliyon.2019.e01790
  • Garrote, G., Domínguez, H., and Parajó, J. C. (2001). Generation of xylose solutions from Eucalyptus globulus wood by autohydrolysis– post-hydrolysis processes: post-hydrolysis kinetics. Bioresource Technology, 79(2): 155-164. DOI: https://doi.org/10.1016/S0960-a.8524(01)00044-X
  • Franz, G., Gavalas, G. B., Voorhies, P. W., and Walker, P. L. (1990). Kinetics of the Primary Reactions of Wood Pyrolysis. Industrial & Engineering Chemistry Research, 29(1), pp. 42-49. DOI: https://doi.org/10.1021/ie00097a00820
  • Kadarwati, S., Qurrochman, T., Kurniawan, C. and Jumaeri, K. (2020). Feasibility study on the utilization of mahogany (Swietenia macrophylla King) wood as a raw material in bio-oil production. Journal of Physics. 7: 22 – 40. DOI: https://doi.org/10.1088/1742-6596/1567/2/02202921
  • Senneca, O. (2007). Kinetics of pyrolysis, combustion and gasification of three biomass fuels, Fuel Processing Technology 88(1): 87 – 97. DOI: https://doi.org/10.1016/j.fuproc.2006.09.002
  • Luo, Z.; Wang, S. and Cen, K, (2005) A model of wood flash pyrolysis in fluidized bed reactor, Renewable Energy, 30(3):377 – 392. DOI: https://doi.org/10.1016/j.renene.2004.03.019