There is a newer version of the record available.

Published November 21, 2025 | Version v1

The PAMP Thruster: A Pulsed Alternating Magnetoplasma Propulsion System for High-Efficiency Interplanetary Missions Computational Feasibility Study and Performance Predictions for Mars Cargo Applications

Description

Abstract

This paper presents a comprehensive computational feasibility study of the Pulsed 
Alternating Magnetoplasma (PAMP) thruster concept for high-efficiency interplanetary 
missions. Using physics-based plasma simulations incorporating Sweet-Parker magnetic 
reconnection theory, we predict specific impulses of 9,800–12,200 s using argon and 
14,500–18,500 s using lithium vapor, with corresponding thrust outputs of 0.85–1.10 N 
and 0.90–1.40 N. The computational model incorporates resonant energy recovery 
(predicted 92% efficiency per cycle) and magnetic reconnection (predicted 62% 
magnetic-to-kinetic conversion efficiency) operating at 800–1200 Hz with superconducting 
magnets in the Sweet-Parker regime (Lundquist number S ≈ 10⁴). Monte Carlo uncertainty 
analysis (n=1000 samples) establishes 95% confidence intervals for all predicted 
performance metrics.

IMPORTANT: No hardware has been constructed. These are computational predictions based 
on established plasma physics theory (Sweet-Parker reconnection, MHD acceleration) 
requiring experimental validation to advance from TRL 2 to TRL 3-4. The predicted 
performance metrics would bridge the gap between Hall effect thrusters (high 
thrust-to-power ratio of 40-60 mN/kW but limited to Isp < 3,000 s) and VASIMR-class 
systems (high Isp up to 30,000 s but T/P ≈ 5 mN/kW), with direct applications to Mars 
cargo missions requiring 50–80 km/s total Δv. 

For a 1000 kg payload Mars mission (60 km/s Δv), predicted PAMP performance indicates 
21% total mass reduction versus ion thrusters and 40-60% reduction in transit time 
(60-90 days vs 150 days), using only 50 kg of lithium propellant. We seek experimental 
partners to validate these computational predictions and construct a proof-of-concept 
prototype to demonstrate the core physics principles.

──────────────────────────────────────────────────────────────────────────────────────────
IMPORTANT CLARIFICATION: COMPUTATIONAL PREDICTIONS, NOT EXPERIMENTAL MEASUREMENTS
──────────────────────────────────────────────────────────────────────────────────────────

The results presented in this section are PREDICTED performance metrics derived from 
physics-based computational simulations, not measurements from physical hardware. No 
prototype has been constructed or tested. 

The simulation incorporates:
- Sweet-Parker magnetic reconnection theory (validated in fusion/astrophysical contexts)
- Magnetohydrodynamic (MHD) plasma acceleration models
- Resonant LC circuit energy recovery analysis
- Monte Carlo uncertainty quantification over physically reasonable parameter ranges

All values labeled as "measured" or "achieved" in tables and text refer to simulation 
outputs that represent theoretically achievable performance IF the concept operates as 
modeled. Key assumptions include:

1. Magnetic reconnection efficiency of 62% (theoretical optimum for S ≈ 10⁴)
2. Energy recovery efficiency of 92% (assumes low-loss resonant circuit)
3. Negligible plasma instabilities and wall losses
4. Ideal magnetic nozzle expansion and plasma detachment
5. Achievable thermal management at kHz pulse frequencies

These predictions establish design targets and performance bounds for experimental 
validation. Actual hardware performance may differ due to:
- Plasma instabilities not captured in 0D/1D models
- Non-ideal reconnection geometries reducing efficiency
- Circuit losses, radiation, and thermal constraints
- Propellant handling challenges (especially lithium)
- Unforeseen engineering limitations

EXPERIMENTAL VALIDATION IS REQUIRED to confirm these computational predictions and 
advance the concept beyond TRL 2 (Technology Concept Formulated) to TRL 3-4 
(Proof of Concept Demonstrated).

Current Status: TRL 2 - Computational feasibility established
Next Step Required: Laboratory proof-of-concept with thrust stand measurements
──────────────────────────────────────────────────────────────────────────────────────────

Keywords: plasma propulsion, magnetic reconnection, computational study, high-specific 
impulse, Mars missions, feasibility analysis, electric propulsion

Type: Is supplemented by
  Identifier: https://doi.org/10.5281/zenodo.17677882
  Relation: This work is extended by the nuclear integration study

Files

PAMP Thruster paper.pdf

Files (2.0 MB)

Name Size
md5:4c4161fa0f44cce4ad02f47f8cf51c4f
870 Bytes Preview Download
md5:59e56295662c70dce8758b4a3c27723f
69.2 kB Preview Download
md5:3fbf2e0db36fd0b2688c68ed03cdccd7
488.1 kB Preview Download
md5:2a9c3b535936c207c5b21e47fe8ca92e
373.5 kB Preview Download
md5:17a56ba59d89d15951e4128c71fef49e
708.1 kB Preview Download
md5:e8c1e99d5d52d64ed37a82979290137f
51.1 kB Download
md5:527e6579d66d7ae7aecc110f4b250589
347.6 kB Preview Download
md5:afcb7f111ab184d095b567b5b4eb2df2
8.0 kB Preview Download
md5:748acd153c67e74c133c648e074d655c
81 Bytes Preview Download