Published July 3, 2025 | Version v1

Evolution of precipitation in a duplex Fe-Mn-Al-C low-density steel revealed by in situ high-energy synchrotron X-ray diffraction

  • 1. ROR icon Universidad Michoacana de San Nicolás de Hidalgo
  • 2. ROR icon Helmholtz-Zentrum Hereon
  • 3. EDMO icon Helmholtz-Zentrum Hereon GmbH
  • 4. ROR icon Universitat Politècnica de Catalunya

Description

Advanced duplex low-density (LD) steels with an austenite-based matrix are promising candidates for transportation applications. In these steels, the austenite remains the stable matrix phase; however, when subjected to heat treatment, it becomes thermodynamically unstable, promoting phase transformations. These transformations lead to the formation of κ-carbides and ferrite, which significantly affect the mechanical behavior of the LD steel. Thus, understanding their precipitation kinetics is paramount for the design of thermo-mechanical treatments. This study focuses on investigating the phase evolution in a Fe-12Mn-8Al-1C duplex LD steel during aging treatment using in situ high-energy synchrotron X-ray diffraction combined with dilatometry. The results obtained revealed the onsets of transformation, confirming the evolution of κ and ferrite phases. The phase volume fractions were determined by Rietveld refinement of the diffraction data. Additionally, microstructural characterization using light optical microscopy (LOM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) verified the austenite as a matrix phase and the presence of second-phases, including ferrite and κ’- and κ*-carbides, after aging. These findings provide a comprehensive understanding of phase evolution, enabling the optimization of processing routes for LD steels.

Files

Restricted

The record is publicly accessible, but files are restricted. Log in to check if you have access.

Additional details

Related works

Is continued by
Other: PROCIR-D-24-00981 (Other)

Dates

Created
2025-03-30

References

  • J. Charles, A. Berghezan Nickel-free austenitic steels for cryogenic applications: the Fe–23% Mn–5% Al–0.2% c alloys Cryogenics, 21 (1981), pp. 278-280
  • J. Charles, A. Berghezan, A. Lutts High manganese-aluminum austenitic steels for cryogenic applications, some mechanical and physical properties J. Phys. Colloq., 45 (1984), pp. 619-623
  • C. Shih, Y. Zhang, Y. Xu, Y. Li An Fe–Mn–Al austenitic steel for cryogenic uses A.F. Clark, R.P. Reed (Eds.), Advances in Cryogenic Engineering Materials, Advances in cryogenic engineering materials (1984), pp. 161-168
  • T. Horiuchi, R. Ogawa, M. Shimada Cryogenic Fe-Mn austenitic steels R.P. Reed, A.F. Clark (Eds.), Advances in Cryogenic Engineering Materials (1986), pp. 33-42
  • S. Chen, R. Rana, A. Haldar, R.K. Ray Current state of Fe-Mn-Al-C low-density steels Prog. Mater. Sci., 89 (2017), pp. 347-408
  • A. Banis, A. Gomez, V. Bliznuk, A. Dutta, I. Sabirov, R.H. Petrov Microstructure evolution and mechanical behavior of Fe–Mn–Al–C low-density steel upon aging Mater. Sci. Eng A, 875 (2023), Article 145109
  • D.J. Magagnosc, D.M. Field, C.S. Meredith, T.R. Walter, K.R. Limmer, J.T. Lloyd Superior strength and ductility in a low density duplex steel studied by in situ neutron diffraction Mater. Sci. Eng. A, 799 (2021), Article 140252
  • C. Mapelli, S. Barella, A. Gruttadauria, D. Mombelli, M. Bizzozero, X. Veys γ decomposition in Fe–Mn–Al–C lightweight steels J. Mater. Res. Technol., 9 (2020), pp. 4604-4616
  • P. Rawat, U. Prakash, V.Satya Prasad Phase transformation and hot working studies on high-Al Fe-Al-Mn-C ferritic low-density steels J. Mater. Eng. Perform., 30 (2021), pp. 6297-6308
  • K. Choi, C.-H. Seo, H. Lee, S.K. Kim, J.H. Kwak, K.G. Chin, K.-T. Park, N.J. Kim Effect of aging on the microstructure and deformation behavior of austenite-based lightweight Fe–28Mn–9Al–0.8C steel Scr. Mater., 63 (2010), pp. 1028-1031
  • K. Chang, C. Chao, T. Liu Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy Scr. Mater., 63 (2010), pp. 162-165
  • K. Sato, K. Tagawa, Y. Inoue Age hardening of an Fe-30Mn-9Al-0.9C alloy by spinodal decomposition Scr. Met., 22 (1988), pp. 899-902
  • K. Ishida, H. Ohtani, N. Satoh, R. Kainuma, T. Nishizawa Phase equilibria in Fe-Mn-Al-C alloys ISIJ Int., 30 (1990), pp. 680-686
  • W. Choo, J. Kim, J. Yoon Microstructural change in austenitic Fe-30wt%Mn-7.8wt%Al-1.3wt%C initiated by spinodal decomposition and its influence on mechanical properties Acta Mater., 45 (1997), pp. 4877-4885
  • Y. Kimura, K. Handa, K. Hayashi, Y. Mishima Microstructure control and ductility improvement of the two-phase γ-Fe/κ-(Fe,Mn)3AlC alloys in the Fe-Mn-Al-C quaternary system Intermetallics, 12 (2004), pp. 607-617
  • C. Chao, C. Hwang, T. Liu Grain boundary precipitation in an Fe-7.8Al-31.7Mn-0.54C alloy Scr. Metall. Mater., 28 (1993), pp. 109-114
  • C. Hwang, C. Chao, T. Liu Grain boundary precipitation in an Fe-8.0Al-31.5Mn-1.05C alloy Scr. Metall. Mater., 28 (1993), pp. 263-268
  • P. Barriobera-Vila, J.M. Vallejos, J. Gussone, J. Haubrich, K. Kelm, A. Stark, N. Schell, G. Requena Interface-Mediated Twinning-Induced plasticity in a fine hexagonal microstructure generated by additive manufacturing Adv. Mater., 33 (2021), p. 2021
  • G. Frommeyer, J. Jiménez Structural superplasticity at higher strain rates of hypereutectoid Fe-5.5Al-1Sn-1Cr-1.3C steel Metall. Mater. Trans. A, 36 (2005), pp. 295-300
  • F. Oliveira, M. Andrade, A. Cota Kinetics of austenite formation during continuous heating in a low-carbon steel Mater. Charact., 58 (2007), pp. 256-261
  • P. Suwanpinij The synchrotron radiation for steel research Adv. Mater. Sci. Eng., 2479345 (2016), pp. 1-7
  • J.M. Vallejos, L.M. Guerrero, M.F. Giordana, J.A. Malarría, G. Requena, E. Maawad, N. Schell, P. Barriobero-Vila Kinetics of the α → γ′ stress-induced martensitic transformation in a Fe–Mn–Al–Ni shape memory bicrystal Mater. Lett., 370 (2024), Article 136861
  • P. Barriobero-Vila, J. Gussone, A. Stark, N. Schell, J. Haubrich, G. Requena Peritectic titanium alloys for 3D printing Nat. Commun., 9 (2018), p. 3426
  • . Barriobero-Vila, R. Jerez-Mesa, A. Guitar, O. Gavalda-Diaz, J.A. Travieso-Rodríguez, A. Stark, N. Schell, J. Llumà, G. Fargas, A. Mateo, J.J. Roa Deformation kinetics of a TRIP steel determined by in situ high-energy synchrotron X-ray diffraction Materialia, 20 (2021), Article 101251
  • G. Kaltzacorta, T. Gutierrez, R. Elvira, P. Jimbert, T. Guraya Evolution of microstructure during isothermal treatments of a duplex-austenitic 0.66C-11.4Mn-9.9Al low-density forging steel and effects on the mechanical properties Metals, 11 (2021), p. 214
  • J. Zhang, D. Raabe, C. Tasan Designing duplex, ultrafine-grained Fe-Mn-Al-C steels by tuning phase transformation and recrystallization kinetics Acta Mater., 141 (2017), pp. 374-387
  • A. Hammersley, S.O. Svensson, A. Thompson Calibration and correction of spatial distortions in 2D detector systems Nucl. Instrum. Methods Phys. Res. A, 346 (1994), pp. 312-321
  • L.B. McCusker, R.B. Von Dreele, D.E. Cox, D. Louër, P. Scardi Rietveld refinement guidelines J. Appl. Crystallogr., 32 (1999), pp. 36-50
  • Y. Liu, F. Sommer, E. Mittemeijer Kinetics of the austenite-ferrite transformation with and without applied stress Trans. Tech. Publ., 172 (2011), pp. 1207-1213
  • O.A. Zambrano, J. Valdés, Y. Aguilar, J.J. Coronado, S.A. Rodríguez, R.E. Logé Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation Mater. Sci. Eng. A, 689 (2017), pp. 269-285
  • P. Chen, X. Li, H. Yi The κ-carbides in low-density Fe-Mn-Al-C steels: a review on their structure, precipitation and deformation mechanism Metals, 10 (2020), p. 1021
  • H. Ding, D. Lui, M. Cai, Y. Zhang Austenite-based Fe-Mn-Al-C lightweight steels: research and prospective Metals, 12 (2022), p. 1572
  • I. Gutierrez-Urrutia Low-density Fe-Mn-Al-C steels: phase structures, mechanisms, and properties ISIJ Int., 61 (2021), p. 16
  • R. Rana Low-density steels JOM, 66 (2014), pp. 1730-1733
  • H. Kim, D.W. Suh, N.J. Kim Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties Sci. Technol. Adv. Mater., 14 (2013), pp. 1-13
  • S. Chen, R. Rana, A. Haldar, K.R. Ray Current state of Fe-Mn-Al-C low-density steels Prog. Mater. Sci., 89 (2017), pp. 345-391
  • W.C. Cheng, Y.S. Song, Y.S. Lin, K.F. Chen, P.C. Pistorius On the eutectoid reaction in a quaternary Fe-C-Mn-Al alloy: austenite → ferrite + kappa-carbide + M23C6 carbide Metall. Mater. Trans. A, 45 (2014), p. 1199
  • W.C. Cheng Phase transformations of an Fe-0.85C-17.9Mn-7.1Al austenitic steel after quenching and annealing JOM, 66 (2014), p. 1809
  • J. Jeong, C. Lee, I. Park, Y. Lee Isothermal precipitation behavior of κ-carbide in the Fe-9Mn-6Al-0.15C lightweight steel with a multiphase microstructure J. Alloy. Compd., 574 (2013), pp. 299-304